- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Swarco Hitex Products
Swarco Hitex Preformed Eco Thermoplastic Lines
Pre-formed thermoplastic lines that are fast and convenient to install, with excellent adhesion, durability, flow and colour stability. Previously known as Hitex Hiflex Preformed Suitable for: Reinstatement of markings following utility works Fast and simple installation of new letters / numbers / symbols Small scale lining work such...
Swarco Hitex Preformed Eco Thermoplastic Letters and Numbers
Fast and convenient to install, with excellent adhesion, durability, flow and colour stability. Suitable for: Reinstatement of markings following utility works. Fast and simple installation of new letters / numbers / symbols. Small scale lining work such as car parks. School playground educational markings. Company logos. Safe route...
Swarco Hitex Eco Texband Tape
A preformed system for the permanent repair of open seams, joints or cracks. Used as a simple overband, it will repair defects up to 5mm wide. Ideal for sealing the surface following asphalt patching such as utility works. Previously known as Hitex TexBand BBA/HAPAS Approved Overbanding Tape Simple torch on application provides a simple...
Swarco Hitex Preformed Eco Thermoplastic Symbols
Pre-formed thermoplastic symbols that are fast and convenient to install, with excellent adhesion, durability, flow and colour stability. See ordering references below. Previously known as Hitex Hiflex Preformed Suitable for: Reinstatement of markings following utility works Fast and simple installation of new letters / numbers /...
Swarco Hitex Non-BBA Overbanding Tape
A preformed overband tape system for the permanent repair of open seams, joints or cracks. Used as a simple overband, it will repair defects up to 5mm wide. Overbanding tape is a long lasting, rapid solution for sealing surfaces following road repairs and utility works. Simple torch on application provides an overband seal No need for...
Swarco Hitex Primer Roll 100
A clear liquid tack coat primer designed for the adhesion of thermoplastic road markings onto bituminous and non-bituminous substrates. HT Primer is an easy to apply, low viscosity, colourless liquid tack coat primer. Previously known as Hitex HT Adhesion Primer The use of HT Primer with Hitex thermoplastic markings is strongly recommended...
Swarco Hitex Preformed Primer Spray 200
A clear aerosol spray primer designed for the adhesion of thermoplastic road markings onto bituminous and non-bituminous substrates. Swarco Preformed Primer Spray 200 (previously known as Hitex HiTack Primer) is an easy to apply, colourless aerosol spray tack coat primer. The use of Swarco Preformed Primer Spray 200 with Swarco Hitex...
Swarco Hitex Swarcoplast Repair Kit
A durable and easy to install patch kit that can be used to repair worn or damaged areas of high friction surfacing as well as ramps, paths and walkways. Swarco Hitex Swarcoplast Repair Kit (previously known as Hitex PumaGrip Anti-Skid Surfacing Kit) provides an all in one anti skid surfacing solution with no specialist equipment required....
Swarco Hitex Swarcoplast Pumabrite Reflective Road Marking Paint
MMA cold plastic road marking materials, engineered to achieve the highest levels of retroreflectivity, durability, adhesion and colour stability. PumaBrite is suitable for structured (Type 2) enhanced wet night reflectivity, centre and edge line markings, junction markings, letters, arrows and other road marking symbols, smaller scale works...
Swarco Hitex Preformed Eco Thermoplastic Anti-Skid Sheet
Fast and convenient to install with excellent adhesion, durability, stability and skid resistance. Previously known as Hitex Hiflex PreformedNo specialist application operatives or heavy machinery required Non-toxic Heavy metal free pigments Fast and easy to apply - can be trafficked after approximately 5-10 mins Surface aggregates stay...
Swarco Hitex BPO Powder Catalyst
A separate catalyst system to enable curing for Hitex marking products. Dosage of the catalyst varies according to material temperature. IMPORTANT - refer below for levels required when using with PumaBrite, PumaTrack, and CM Primer More Information Delivery Info
Swarco Hitex Swarcoplast Primer Roll 120
Primer for Swarco Hitex Puma MMA systems on metal and concrete substrates (e.g. iron, aluminium, stainless steel), with excellent adhesion. Previously known as CM Primer Easy to apply Separate hardener (Hitex BPO Powder Catalyst) required, levels depend on substrate temperature More Information Delivery Info Hitex BPO Powder Catalyst...
Swarco Hitex Swarcoplast PumaTrack Cycle Path and Walkway Paint
Coloured MMA Road Surface Treatment. Quick and easy to install and ideal for walkways and cycle paths, PumaTrack surface treatment is engineered to achieve the highest levels of durability, adhesion and colour stability. Smooth or textured finish, depending on application. Separate hardener (BPO Powder Catalyst) required, levels depend on...
Swarco Hitex Preformed Eco Thermoplastic Road Markings
Pre-formed thermoplastic road markings that are fast and convenient to install, with excellent adhesion, durability, flow and colour stability. More Information Delivery Info See More Thermoplastic Symbols & Lines
Swarco Hitex Preformed Eco Thermoplastic Car Charging Symbols
Pre-formed thermoplastic symbols that are fast and convenient to install, with excellent adhesion, durability, flow and colour stability. 9 designs available, in 4 sizes from 800mm to 1400mm, and mutliple colours More Information Delivery Info See More Thermoplastic Symbols & Lines
Swarco Hitex Line Markings
20+ colours. For non-porous bitumen and concrete based highway surfaces. Pre-formed thermoplastic lines for reinstatement of markings following utility works, fast and simple installation of new letters / numbers / symbols, small scale lining work such as car parks, school playground educational markings, company logos, safe route to...
Swarco Hitex Parking & Road Symbols
Symbols for road surfaces, car parks, pathways, bike paths and more. Suitable for reinstatement of markings following utility works, fast and simple installation of new letters / numbers / symbols, small scale lining work such as car parks, school playground educational markings, company logos, safe route to school (walking bus) routes....
Swarco Hitex Parking & Road Markings
Pre-formed thermoplastic road markings for fast and convenient installation. Ideal for road surfaces, car parks, forecourts, loading bays, school playground, drop-off zones, bike paths and more. Includes speed roundels from 10 to 50mph, school crossings, and no waiting signs.
Need Help?
Need Help?
Swarco Hitex lead research, development, and the manufacture of road safety markings and surfacing products, with formulations to suit contractor requirements. Their full range of road surface products are available at Rawlins Paints for lining and marking roads and highways, pathways and cycle paths, and playgrounds:
• MMA Road Marking Paints
• MMA Cycle Path and Walkway Paints
• Preformed Thermoplastic Road Markings
• Preformed Thermoplastic Speed Roundels, Symbols, Letters and Numbers, and Lines
Swarco Hitex are the experts in Global Road Safety Solutions.
Their high-performance preformed road markings and anti-skid/high friction surfacing products help to promote road safety. Millions of vehicles are guided and controlled on the road roads every day with effective navigational guides that are simple and easily recognisable. Swarco Hitex uses the highest quality raw materials and manufacturing processes to produce road markings at the highest levels of quality in the industry. Their pre-formed thermoplastic road marking materials are manufactured in accordance with ISO 9001 and 14001 standards.
High-friction surfacing is designed to help reduce braking distances, particularly when conditions are wet, and to prevent skidding. Type 1 anti-skid surfacing has demonstrated in numerous industry studies to be a direct link in the amount of incident reductions in a wide number countries, over long periods of time. Such installations provide safer roads that save countless lives in both wet and dry conditions, not to mention the associated financial consequences, often used in:
- ∙ Highly trafficked, high stress areas
- ∙ Sharp bends, junctions and motorway slip roads
- ∙ Roundabout and pedestrian crossing approaches
- ∙ Accident black spots
Type 1 is the highest level of certification applied to high friction products, and Hitex epoxy Type 1 materials are accredited by the British Board of Agreement (BBA) certification scheme, covering products and approved installers and regulated in the UK under the Highways Agency BBA/HAPAS scheme.
Swarco Hitex manufactures premium quality hot and cold-applied anti-skid material that is suitable for use in a diverse range of road infrastructure projects, including:
- ∙ M56 Junctions 14-15 Road Marking Maintenance Scheme
- ∙ M25 Emergency Areas - part of Highways England Smart Motorways
- ∙ A556 Knutsford To Bowdon Upgrade - part of a £15 billion government investment in motorways and major A roads, providing road marking and surfacing solutions for the new 4.5 mile dual carriageway
- ∙ Mersey Gateway Project - £600M landmark civil engineering infrastructure project that includes a new six-lane toll bridge over the River Mersey between the towns of Runcorn and Widnes