- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (inc. VAT) £0.00
Need Help?
Tikkurila Products
Tikkurila Muuri
A breathable, heat-resistant paint ideal for fireplaces. Available in 34 popular colours and does not require a separate primer.Resistant to dry heat up to 300℃ (white, untinted only) or 180℃ (tinted colours). Inorganic silicate paint for interior use with excellent heat-resistance. Suitable for use on concrete, lime, lime cement, cement...
Tikkurila GrafoTherm
1-component water-based anti-condensation coating for steel roofing sheets, steel structures and other metal surfaces, where condensation and dripping-water problems occur. It is also suitable for mineral walls and ceilings.Matt Finish. Excellent moisture absorbing and evaporation properties. Forms an elastic, strong film - Insulates...
Tikkurila Patio Paving Stain
A water-borne paving stain for industrially dyed and uncoloured paving stones such as concrete garden stones and slabs. Easily and quickly renew the look of old paving stones and slabs, helping to align and deepen the colour of paving stones.Just 1 or 2 coats are required with use of a brush, roller or knapsack spray to achieve the desired...
Tikkurila Temadur 50
Time-proven, easy-to-use general purpose topcoat in 4,000+ colours for constructional steelwork and machinery, with a wide range of colours to choose from.Two-component, durable and non-chalking semi-gloss polyurethane paint, hardener aliphatic isocyanate. Forms a durable, easy-to-clean and non-chalking topcoat with good gloss and colour...
Tikkurila Temadur 20
2-pack semi-matt polyurethane paint with 3,800+ colours that can be used as a single-coat paint for steel, zinc and aluminium surfaces with its anti-corrosion pigmentation, and also used as a primer or as a semi-matt topcoat in epoxy-polyurethane systems. It is also suitable for use on uPVC.Resistance to weathering and abrasion MED...
Tikkurila Temabond ST 200
2 component high-solids, aluminium pigmented modified epoxy maintenance paint for demanding surfaces such as steel structures, railway vehicles, and infastructure in energy and telecommunications.Surface-tolerant high-solids epoxy paint. Very good adhesion even to hand-prepared steel. Lower VOC emissions than conventional epoxy paints....
Tikkurila Temacoat RM 40
2-component, resin modified epoxy primer/topcoat with 4,000+ colours that can be used as a single-coat system.Good adhesion to steel, zinc and aluminium surfaces exposed to severe abrasion or chemical stress. Suitable for concrete surfaces and has a CE marking. Can be used on steel structures in wet environments, e.g. inside pontoons,...
Tikkurila Temacoat GPL-S Primer
Tikkurila Temacoat GPL-S Primer is a two-component, polyamide-cured high build epoxy primer containing zinc phosphate.Excellent adhesion to steel, zinc and aluminium surfaces. Used as a primer or an intermediate coat in paint systems exposed to abrasion and chemical stress. Can be overcoated after a prolonged period of time. Faster...
Tikkurila Rostex Super Metal Primer
For priming steel, zinc-coated steel and non-slip aluminum surfaces subject to heavier stress than usual, when the adhesion of normal alkyd primers will not be sufficient or would take too long to dry. Also suitable for copper, brass, stainless steel, pural, polyester, acryl, and obsolete PVC-coated steel sheets. Can be used as a primer for...
Tikkurila Temalac FD 80
Tikkurila Temalac FD 80 is a fast-drying, one-component glossy alkyd topcoat. It is an ideal solution for workshops with fast production cycles and for on-site-painting. Used as a topcoat in alkyd systems. The paint is an ideal solution for workshops with fast production cycles and for on-site-painting. Provides an almost unlimited range...
Tikkurila Panssarimaali
A quick drying alkyd anti-corrosive single pack coating in 3,800+ semi-gloss colours for steel, cladding and roofing. Ideal for metal-sheeted roofs, water channels, down pipes, banisters and various steel constructions.Excellent weather resistance. Ideal for industrial and maritime atmospheres. Heat resistant up to 80 °C (ISO 4211-3).
Tikkurila Temaprime EUR
Tikkurila Temaprime EUR is a fast-drying, one-component anti-corrosive economical alkyd primer. Recommended for steel structures, agricultural, construction and other machinery.Huge colour range available. An excellent choice for use in assembling plants and painting stations with rapid production cycles. The product has MED (Marine...
Tikkurila Temacoat GPL
Temacoat GPL, a two-component, amine adduct cured mar and chemical resistant epoxy topcoat used especially as a finishing coat especially for objects exposed to heavy abrasion and chemical attack. Due to CE marking it is also suitable for concrete surfaces in process industries.Recommended for bridges, tanks and different types of...
Tikkurila Temadur 90
Tikkurila Temadur 90, 2-pack, high gloss polyurethane paint recommended to be used as a glossy decorative finishing coat for epoxy systems on a variety of substrates such as steel, aluminium, concrete etc. exposed to severe weathering and/or chemical stress.Forms a durable, easy-to-clean and non-chalking topcoat with outstanding gloss and...
Tikkurila Temadur 10
Tikkurila Temadur 10, a two-component matt polyurethane paint containing anti-corrosive pigments used as a single-coat paint for steel, zinc and aluminium surfaces.Huge colour range available with RAL, BS & NCS shades Can also used as a primer or a matt topcoat in epoxy systems exposed to weathering and/or chemical stress...
Tikkurila Temalac ML 90
Tikkurila Temalac ML 90 is a fast-drying, one-component alkyd topcoat. Its usage areas are small tanks, agricultural machinery, haulage equipment and other machinery and equipment.Used when there is a high demand for colour and gloss retention. Gives the surface a high-quality appearance. It is the perfect choice when an easy-to-apply...
Tikkurila Temacoat GPL-S MIO
Tikkurila Temacoat GPL-S MIO is a two-component, polyamide cured epoxy paint pigmented with micaceous iron oxide, with superior adhesion to steel surfaces forming a very strong and durable film that can be used as a primer or an intermediate coat in aggressive environmentsFast cure and low-temperature cure hardeners available - click to...
Tikkurila Temathane 90
Tikkurila Temathane 90 is a two-component, glossy polyurethane paint, hardener aliphatic isocyanate.The paint is used as a glossy topcoat for epoxy and polyurethane systems exposed to weathering. Forms a durable, easy-to-clean and non-chalking finish. Suitable for painting the outside of storage tanks, steel building and other steelwork....
Tikkurila Temabond ST 300
Tikkurila Temabond ST 300 is a two-component high-solids, modified tintable epoxy maintenance paint for demanding surfaces, and is recommended for repairing of damages caused by transport or installation.Surface-tolerant with a wide colour range For steel and concrete surfaces Very good adhesion, even to hand-prepared steel Lower VOC...
Tikkurila Temadur HS 90
Tikkurila Temadur HS 90, a two-component, high-solids glossy polyurethane paint, hardener aliphatic isocyanate recommended to be used as a glossy topcoat for epoxy systems exposed to weathering and/or chemical stress.Huge colour range from RAL, BS & NCS Forms a smooth and silky surface with outstanding gloss Retains its gloss far...
Tikkurila Temazinc 99
Tikkurila Temazinc 99, a 2-component, polyamide cured zinc-rich epoxy paint providing superior cathodic protection for steel, used as a primer in epoxy, polyurethane, acrylic and chlorinated rubber systems for steel surfaces exposed to severe climatic conditions.Prequalified in the NORSOK system 1; an excellent choice for the most...
Tikkurila Panssari Akva
A water-based, semi-matt, acrylic paint for use on cladding, sheet metal and other factory finished surfaces.Superb weather resistance. Colour stability. Film flexibility. Extremely durable finish. Protects against attack from chemical and biological erosion. Due to its flexibility and colour stability, Panssari Akva can be used in the...
Tikkurila Temakeep
Tikkurila Temakeep is a two-component adhesion primer based on epoxy resin, used on cold-rolled steel, stainless steel, aluminium, zinc, epoxy and polyurethane surfaces as an adhesion primer before the primary paint system.For surfaces exposed to climatic conditions, gases or splashes Can be overcoated with an extensive range of topcoats...
Tikkurila Solid WB-L
3,800+ semi-gloss colours for concrete and wooden floors and stairs in residential, commercial and storage premises, and concrete floors in saunas and humid spaces.Water-borne polyurethane-reinforced acrylate paint. Suitable for floors subjected to light chemical and mechanical stress. Also suitable for painting of floors previously...
Tikkurila Fontecryl AP
Tikkurila Fontecryl AP is a water-borne, one-component fast-drying acrylic based primer for various surfaces containing active anti-corrosive pigments.Provides excellent adhesion Used as an anti-corrosive primer on steel, aluminium and zinc surfaces Suitable for dipping Can be overcoated both with water and solvent-borne topcoats Wide...
Tikkurila Temacoat SPA 50
Tikkurila Temacoat SPA 50 is a two-component resin modified epoxy paint that can be applied to steel, zinc and aluminium as an excellent primer, intermediate or finish coat on surfaces exposed to stress and is also suitable as a single-coat system.Rapidly recoatable and ready to handle paint Forms durable film with good mechanical,...
Tikkurila Temacoat SPA Primer MIO
Tikkurila Temacoat SPA Primer MIO, a two-component resin modified epoxy paint containing micaceous iron oxide, used as a primer or an intermediate coat on surfaces exposed to climatic, mechanical and chemical stress.Good adhesion to steel, zinc and aluminium surfaces Recommended for building frameworks, tubular bridges, conveyors and...
Tikkurila Temasilox
Tikkurila Temasilox is a high performance, isocyanate free two-component, high-solids and high-gloss polysiloxane topcoat. Ideal for bridges, tanks, pipes, buildings, power plants, offshore structures and other structures that require long durability in severe corrosive atmospheric areas.Huge colour range available. Excellent...
Tikkurila Fontecoat EP 50
Tikkurila Fontecoat EP 50, a two-component water-borne epoxy topcoat and a single-coat paint recommended for framework, service platforms, conveyors and other steelwork, machinery and equipment. The product has MED (Marine Equipment Directive) certificate no VTT-C-12360-15-18 and is thus accepted for painting surfaces inside ships.Huge...
Tikkurila Fontecoat EP 80
Tikkurila Fontecoat EP 80, a two-component water-borne epoxy topcoat for low VOC demands that can be used as a glossy topcoat in epoxy paint systems for steel surfaces.Huge colour range from RAL, BS & NCS Forms a tough and glossy surface with high resistance to abrasion and chemical stress Low VOC emissions Can be used with...
Tikkurila Fontezinc 85
Tikkurila Fontezinc 85 is a two-component, water-borne zinc-rich epoxy paint that is a more environmentally friendly option for bridges, cranes and steel framework as well as steelwork and equipment in the forest and chemical industries.Offers cathodic protection of steel For paint systems in severe environments Can withstand severe...
Tikkurila Temachlor 40
Tikkurila Temachlor 40 is a one-component high-build chlorinated rubber-based paint that can be applied at sub-zero temperatures, as a finishing coat for chlorinated rubber systemsHuge colour selection from RAL, BS & NCS Ideal steel surfaces and structures Good film-building properties Suitable for surfaces exposed to marine or...
Tikkurila Temacoat 50
Tikkurila Temacoat 50 is a two-component resin modified epoxy paint containing anti-corrosive pigments that adheres well to steel, zinc and aluminium surfaces and can be used as a single-coat paint.High film-building properties. Good resistance to mechanical, chemical and climatic stress. Forms a durable and flexible surface. Low VOC...
Need Help?
Need Help?
Rawlins Paints are the UK's premier Tikkurila paint stockist with thousands of colours available from RAL, British Standard and NCS. Use the sidebar (or mobile) filter to refine available product listings, based on colour options, surface types, application methods and more.
Tikkurila's industrial solutions provide cost-effective and long-term protection against corrosion and wear on steel and concrete for many years in sectors that include Processing, Energy and Telecommunication, Marine, Railways, Farming and Agricultural, and sub-sectors that include ACE Agriculture, Construction and Earth-moving Machinery and Equipment, Steel Structures in Bridges, Harbour Infrastructure, Steel Structures, Storage Tanks (Interior and Exterior surfaces) and Reservoirs.
Tested both in laboratory and in real-life conditions with outstanding results, Tikkurila coatings include high-solids paints with very low VOC content that can be used as single-coat systems for significantly reduced production costs, and water-borne coatings that compare favourably with the performance of solvent-borne paints, fully complying with exacting industrial quality standards and the latest environmental regulations. Tikkurila's range of products includes:
- NORSOK-Approved Systems
- MED (Marine Equipment Directive) Certification
- M1 Approved Products
- CE Marking
Tikkurila is a Nordic paint company that has manufactured products made of carefully chosen raw materials that meet the highest quality standards since 1862, with 8 production facilities in 6 countries making Tikkurila coatings available to more than 40 countries worldwide.
Industrial Solutions
Aimed at professionals in industrial and commercial sectors, Tikkurila develops products with a strong focus on durability to withstand exposed and challenging weather conditions, including primers, intermediate coats, spot-maintenance, topcoats, and one-coat systems.
Customer Support
Rawlins Paints offer full product and technical support across Tikkurila’s range of products, so if you are a building manager, surveyor, architect or business owner, get in contact with us today on 0113 2455450 (option 2) or send a message to [email protected] to find out how Tikkurila may be the best paint specialist manufacturer for your needs.