- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Aluminium Paints
Direct-to-Aluminium paints are designed for use on untreated aluminium surfaces, providing excellent adhesion and protection against corrosion. These coatings are formulated to bond directly to aluminium, eliminating the need for a separate primer. They are commonly used in industrial settings, such as factories, marine applications, and external structures where aluminium is exposed to harsh conditions. Proper surface preparation is crucial to ensuring maximum adhesion and performance.
Jotun Conseal Touch-Up
Jotun Conseal Touch-Up is a one component physically drying acrylic coating with a matt finish. This high build product is fast drying and can be used direct to metal. Ideal as a primer/topcoat in atmospheric environments Can be applied at sub zero surface temperatures Available in hundreds of RAL, NCS, BS and Jotun Colours - 1,100+ new...
Jotun Jotamastic 90
Jotun Jotamastic 90 is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids and high build. This Jotun product is tintable in a wide range of colours and is specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection...
Jotun Jotamastic 90 Aluminium
Jotun Jotamastic 90 Aluminium is a two component polyamine cured epoxy mastic coating. It is aluminium pigmented for improved barrier effect. Suitable for properly prepared carbon steel, galvanised steel, stainless steel, aluminium, concrete and a range of aged coating surfaces. Aluminium version of Jotun Jotamastic 90 Surface tolerant,...
Jotun Jotamastic 90 WG
Jotun Jotamastic 90 WG is a winter grade version of Jotamastic 90 to aid application in lower temperatures and to provide faster drying and curing times. Two component polyamine cured epoxy mastic coating Also available as Jotun Jotamastic 90 Aluminium WG for improved barrier effect Surface tolerant Abrasion resistant High solids High...
Tikkurila Temadur 20
2-pack semi-matt polyurethane paint with 3,800+ colours that can be used as a single-coat paint for steel, zinc and aluminium surfaces with its anti-corrosion pigmentation, and also used as a primer or as a semi-matt topcoat in epoxy-polyurethane systems. It is also suitable for use on uPVC. Resistance to weathering and abrasion MED...
Jotun Hardtop Flexi
Jotun Hardtop Flexi is a high solids (64% volume) polyurethane topcoat with excellent wetting and adhesion properties. Hardtop Flexi has a remarkable ability to resist impact and will maintain initial gloss level over extended periods. This is one of the few products that contain anti-corrosive pigments for the best direct to metal...
Jotun Penguard HB
Jotun Penguard HB is a two component polyamide cured high molecular weight epoxy coating designed as a high build, all purpose coating for new construction. Can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments. Note: 5L red is made to order, with a 10-working day lead time
Jotun Jotamastic 90 Aluminium WG
Jotun Jotamastic 90 Aluminium WG is a two component winter grade polyamine cured epoxy mastic coating. It is aluminium pigmented for improved barrier effect. Suitable for properly prepared carbon steel, galvanised steel, stainless steel, aluminium, concrete and a range of aged coating surfaces. Winter grade version of Jotamastic 90...
Jotun Jotamastic Smart Pack HB
Jotun Jotamastic Smart Pack HB is a two component amine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product designed for application with brush and roller. 1:1 mixing ratio for easy use and reduced wastage. Specially designed for areas where optimum surface preparation is not possible, provides long lasting...
Jotun Jotamastic 90 GF
Jotun Jotamastic 90 GF is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids and high build. It is reinforced with glass flakes for improved abrasion and scratch resistance. Specially designed for areas where optimum surface preparation is not possible or desired. Now available...
Selemix 7-530/7-531 2K Polyurethane Direct Topcoat (10 GU)
10% gloss level versatile, 2-pack PU finish for direct application without need for a primer. Suitable for use on Steel, Cast Iron, Aluminium, Light Alloys, GRP and Painted Surfaces Excellent anticorrosive properties Available in 10%, 30%, 50%, 70% and 80% Gloss Levels (click to view product) Available in over 6,700+ RAL, RAL Metallic*,...
Jotun Penguard FC
Jotun Penguard FC is a two component polyamide cured high molecular weight epoxy coating that has a semi gloss finish with fair gloss retention. It is a high solids product that can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric environments. To be used as a topcoat in atmospheric environments. Now...
Hempel Hempadur 15570
Hempadur 15570 is a two component, polyamide-adduct cured epoxy paint, which cures to a strong and highly corrosion resistant coating, at temperatures down to -10°C. Maintenance and repair primer, intermediate, and/or finishing coat in Hempadur systems in severely corrosive environment, and many more uses below EC-type examined as a low...
Selemix 7-534/7-535 2K Polyurethane Direct Topcoat (50 GU)
50% gloss level versatile, 2-pack PU finish for direct application without need for a primer. Suitable for use on Steel, Cast Iron, Aluminium, Light Alloys, GRP and Painted Surfaces Excellent anticorrosive properties Available in 10%, 30%, 50%, 70% and 80% Gloss Levels (click to view product) Available in over 6,700+ RAL, RAL Metallic*,...
Sherwin-Williams Macropoxy 646
Sherwin-Williams Macropoxy 646 is a versatile high performance polyamide cured epoxy designed to fulfil the needs of both new construction and maintenance painting. Available in 400+ colours, including RAL and BS Please note: Also available in Aluminium subject to an extended lead time of 14 days and a minimum order quantity of 200L -...
Jotun Penguard Universal
Jotun Penguard Universal is a two component polyamine cured pure epoxy coating that is a fast drying, all year round, high solids, high build product. Jotun Penguard Universal provides excellent corrosion protection as part of a complete coating system and can be used as primer, mid coat, finish coat or as a single coat system in atmospheric...
Selemix 7-532/7-533 2K Polyurethane Direct Topcoat (30 GU)
30% gloss level versatile, 2-pack PU finish for direct application without need for a primer. Suitable for use on Steel, Cast Iron, Aluminium, Light Alloys, GRP and Painted Surfaces Excellent anticorrosive properties Available in 10%, 30%, 50%, 70% and 80% Gloss Levels (click to view product) Available in over 6,700+ RAL, RAL Metallic*,...
Jotun Penguard Express CF
Jotun Penguard Express CF is a two component polyamide cured, colour stable epoxy primer/finish coating that is fast drying, high solids and high build. It can be used as primer, mid coat or finish coat in atmospheric environments and is specially designed for new construction where fast dry to handle and over coating times are required....
Jotun Jotacote Universal N10
Jotun Jotacote Universal N10 is specially designed as a universal, all round, all year, new building coating where fast dry to handle times are required. Jotun Jotacote Universal N10 can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments and is replacing the current Jotacote Universal...
Hempel Hempaprime Multi 500 Winter 45953
Hempaprime Multi 500 is a fast drying, high solids epoxy paint. It provides hard wearing and long lasting barrier protection in coating systems for severe corrosive environments. Recommended as a high-build, intermediate coat in high performance coating systems where fast handling and short overcoating times are required Meets the...
Tikkurila Fontecryl SC-MR 10
Tikkurila Fontecryl SC-MR 10 can be applied directly onto steel without any priming. It adheres extremely well to the surface and forms a tight, protective paint film. Water-borne, one-component fast-drying acrylic-based paint which contains active anti- corrosive pigments. Fast drying enables rapid overcoating, thus shortening overall...
Tikkurila Temadur 10
Tikkurila Temadur 10, a two-component matt polyurethane paint containing anti-corrosive pigments used as a single-coat paint for steel, zinc and aluminium surfaces. Huge colour range available with RAL, BS & NCS shades Can also used as a primer or a matt topcoat in epoxy systems exposed to weathering and/or chemical stress...
HMG High Build Vinyl Primer Finish
HMG High Build Vinyl Primer Finish is a high build anti corrosive vinyl primer finish. Excellent adhesion Corrosion protection to mild steel, aluminium, stainless steel and galvanised substrates Available in 5,000+ colours from RAL, NCS, and British Standard Also available as an aerosol, please see HMG High Build Vinyl Primer Finish...
Selemix 7-538/7-539 2K Polyurethane Direct Topcoat (80 GU)
80% gloss level versatile, 2-pack PU finish for direct application without need for a primer. Suitable for use on Steel, Cast Iron, Aluminium, Light Alloys and GRP Excellent anticorrosive properties Available in 10%, 30%, 50%, 70% and 80% Gloss Levels (click to view product) Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and...
Jotun Penguard Pro GF
Glass flake reinforced, abrasion resistant epoxy coating that is surface tolerant, fast drying, high solids and high build. Specially designed for areas where increased abrasion and impact resistance is needed such as decks, walkways and landing areas. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and...
Selemix 7-530/7-531 2K Polyurethane Direct Topcoat Economy (10 GU)
Versatile, 2-pack PU with 10% gloss finish for direct application to a variety of substrates without need for a primer. Suitable for use on Steel, Cast Iron, Aluminium, Light Alloys, GRP and Painted Surfaces Excellent anticorrosive properties Available in 10%, 30%, 50%, 70% and 80% Gloss Levels (click to view product) Available in over...
HMG High Build Vinyl Primer Finish Aerosol
HMG High Build Vinyl Primer Finish Aerosol is a 1K high build anti corrosive vinyl primer finish. This product has also been designed to be “Ready for Use”, for the non-aerosol version of this product please see HMG High Build Vinyl Primer Finish. 400ml/16oz Aerosol Available in packs of 1 or packs of 2-10, 40, 50, 100 and 500 with qty...
Jotun Penguard Pro
Jotun Penguard Pro is a two component amine cured epoxy coating that is a surface tolerant, fast drying, high solids, high build product specially designed as a universal, all round, all year, new construction coating. This Jotun Paints product can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and...
Jotun Jotamastic 90 GF WG
Jotun Jotamastic 90 GF WG is a `Wintergrade` version of Jotamastic 90 GF to aid application in lower temperatures and to provide faster drying and curing times. Two component polyamine cured epoxy mastic coating Surface tolerant Abrasion resistance High solids High build product Reinforced with glass flakes for improved abrasion and...
Cromadex 683 Two Pack Polyurethane Eggshell Primer Finish
Cromadex 683 Two Pack Polyurethane Eggshell Primer Finish is a two pack eggshell primer finish; the high quality resin and curing agent help to produce excellent long term colour stability. The product contains zinc phosphate giving added corrosion resistance for greater durability. 4,800+ colours, inc. RAL, RAL Design & Effect, BS, NCS...
Selemix 7-534/7-535 2K Polyurethane Direct Topcoat Economy (50 GU)
Versatile, 2-pack PU with 50% gloss finish for direct application to a variety of substrates without need for a primer. Suitable for use on Steel, Cast Iron, Aluminium, Light Alloys, GRP and Painted Surfaces Excellent anticorrosive properties Available in 10%, 30%, 50%, 70% and 80% Gloss Levels (click to view product) Available in over...
Sherwin-Williams Acrolon EG-120
Sherwin-Williams Acrolon EG-120 - formerly known as SikaCor EG-120 - is a two-pack low solvent polyurethane topcoat for direct application on steel, galvanized steel and aluminium. Excellent adhesion and weather resistance, for use on bridges, pipe lines, containers, industrial and harbour installations, sewage treatment plants and large...
Cromadex 690 Two Pack Polyurethane Gloss Primer Finish
Cromadex 690 Two Pack Polyurethane Gloss Primer Finish is a two pack gloss primer finish; it is a high build finish making it suitable for blasted steel. The product contains zinc phosphate giving added corrosion resistance for greater durability. 4,800+ colours, inc. RAL, RAL Design & Effect, BS, NCS & the new NCS 2050 colours...
Need Help?
Need Help?
What Makes Direct-to-Aluminium Paints Essential?
Direct-to-Aluminium paints are highly specialised coatings engineered to bond directly to untreated aluminium surfaces. Unlike conventional paints, these coatings do not require a primer, offering a more efficient solution for corrosion protection. Their unique formulation ensures durability in challenging environments where standard coatings may fail, making them a top choice for industrial, marine, and external applications.
Why Do You Need Direct-to-Aluminium Paints?
Aluminium’s smooth and naturally oxidising surface can make it difficult for traditional coatings to adhere properly. Direct-to-Aluminium paints solve this by delivering excellent adhesive strength, eliminating the need for primers while offering superior protection against corrosion. This makes them ideal for settings exposed to moisture, chemicals, and fluctuating temperatures, such as marine environments, industrial equipment, and external structures.
Perfect Applications for Direct-to-Aluminium Paints
These coatings are trusted across a wide range of industries. Whether used in factories, on boats, or for external architectural projects, direct-to-Aluminium paints are the go-to solution for long-lasting protection. They are particularly valuable in environments where aluminium needs to withstand harsh conditions, such as marine vessels, storage tanks, machinery, and cladding systems.
The Key to Success: Proper Surface Preparation
Surface preparation is crucial for achieving optimal results with direct-to-Aluminium paints. Aluminium surfaces must be thoroughly cleaned and free from contaminants like grease, dirt, or oxidation. In some cases, light abrasion may be necessary to enhance adhesion. Ensuring a clean, properly prepared surface will maximise the durability and performance of the coating.