- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Boards, Batts and Shuttering
Reinstate the fire performance of fire barriers in walls and floors with our range of fire-resistant and fire-rated boards, batts and shuttering. View the full fire stopping range at Rawlins here.
If you require more help to find and specify fire protection for your project or contract, our technical team are always on hand to advise. Give us a call on 0113 2455450 (option 2) or send a message to [email protected].
Nullifire FB770 Intudeck
Rock mineral fibre board coated with smoke and fire resistant sealant, provides up to 90 minutes fire resistance under timber floors and is ideal for installing above ceilings that can't be disturbed, such as decorative or made from lath and plaster. 1200 x 600 x 70 mm size Contact our sales team on 0113 2455450 if custom sizes required...
FSi Stopseal 50/60 Fire Batt
An ablative-coated stonewool board used to reinstate the fire resistance performance of internal wall and floor constructions where apertures are penetrated by single or multiple services. Prevention of air leakage and provides smoke seal Maintains Acoustic performance Assumed working life 30 years Highly flexible, high performance...
Astroflame PFP Fire Resistant Boards
Designed to prevent the spread of fire and smoke through openings in fire rated walls and floors where openings are formed to allow the installation of multiple building services. Coated both sides, all raw edges need to be coated with Astro PFP FR Coating. Astroflame PFP FR Board Coating or Astroflame Intumescent PFP FR Acrylic Sealant must...
Protecta FR Board
Designed to prevent the spread of fire and smoke through openings in fire rated walls and floors with multiple installed building services. Permanently flexible, it will maintain the acoustic design performance in fire rated walls and floors, accommodating movements during fire and smaller movements in the construction it has been fitted...
Astroflame Fire Resistant Batt
Specifically designed for sealing around service penetrations in walls and floors, a single Astroflame board (50mm or 60mm thick) can provide high levels of fire integrity and insulation. Tested in Block Wall, Concrete, Masonry, Plasterboard Partition and tested in Concrete Floors. Astroflame Fire Resistant Batt Coating Spray Grade,...
Nullifire FB750 Intubatts
Fully identifiable, fire resistant ablative skinned rock mineral wool boards used for fire protection of openings in fire barriers used for pipes and services to pass through. Refer to order references below Factory finished unique multilayered, low resin bonded, rock mineral fibre board Ablative coated on both faces with unique...
Rockwool 50mm Ablative Coated Batt
A high-density stone wool core, pre-coated on both sides with our high-performance ablative coating. Ablative Coated Batt has been comprehensively tested as part of the Rockwool Firepro range of fire protection products, specifically for use in service penetrations, head of wall and other void seals. Provides fire stopping solutions in...
Quelfire QuelStop Ablative Coated Fire Batt System
A coated mineral wool board used to reinstate the fire rating of wall and floor constructions where they have been penetrated by services, up to a 2 hour fire rating. Available alongside QuelStop Ablative Coating, a flexible coating for use when installing the QuelStop Ablative Coated Fire Batt system. QuelStop Fire Batt is always installed...
SikaSeal-626 Fire Board
A mineral wool based protection board coated with the fire resistant, ablative coating Sikacryl-625 Fire on both sides providing up to 4 hours fire resistance for sealing a wide range of service penetrations. For face fit (pattress-fit) and internal-fit installations Can be used for penetrations up to 1200 x 730 mm Provides acoustic...
Rockwool 60mm Ablative Coated Batt
A high-density stone wool core, pre-coated on both sides with our high-performance ablative coating. Ablative Coated Batt has been comprehensively tested as part of the Rockwool Firepro range of fire protection products, specifically for use in service penetrations, head of wall and other void seals. Provides fire stopping solutions in...
Quelfire Mineral Wool Shuttering Slab
A non-combustible mineral wool batt which will provide increased fire resistance when used as a shutter for fire protection compounds. It is easy to cut facilitating installation around services and is used as a fire resistant permanent or temporary shuttering to all types of fire protection compound.
Rockwool SP FireStop Slab
Specifically designed as part of an effective fire stopping insulation system to form cavity fire stops and accommodate an element of movement encountered within buildings. Suitable for a wide variety of purposes including within masonry constructions, curtain walling systems, large cavity voids and rainscreen facades (vertical use only)....
Rockwool Beamclad System
Manufactured using high performing, noncombustible stone wool insulation, specially designed to provide fire protection to structural steel for periods of up to 4 hours. Offers contractors simple and economical fire protection solutions to the very real diversity of modern steel constructions Available in a plain or foil faced finish,...
Nullifire FI140 Shutter Slab 140KG
A rigid, moisture resistant, non-combustible, rock mineral wool slab. To be used as a shutter/dam for Nullifire FR230 Intucompound Fire Mortar, for use in fire compartment separating walls & floors. Non-combustible: Euroclass A1 to EN13501-1 Easy to cut Durable and non-hydroscopic Rot proof, does not sustain vermin Excellent...
Rockwool Soffit Slab
Non-combustible stone wool insulation which is particularly suited for providing cost effective fire resistance and thermal insulation through concrete car park soffits and similar applications. Thermal, fire and acoustic insulation for concrete soffits Non-combustible (Euroclass A1) - Tested to BS EN 1363-1 CE marked in accordance with...
Rockwool Fire Barrier Slab
Comprises a high density stone wool core which is foil faced on both sides. It has been developed to prevent the spread of flames and inhibit heat and smoke through concealed spaces in buildings and improve sound reduction. Fire resistance of up to 4 hours integrity Simple, butt jointed and friction fit application 100 x 666 x 1000mm...
Rockwool Fire Duct Section
Provides comprehensive performance for stability, integrity and insulation, for all ducts passing through fire-rated walls or floors. Fully tested to BS476-24 (duct types A and B) for preventing fire spread from one compartment to another. Three products are available in the Fire Duct Systems range, in a range of thicknesses: Fire Duct...
Rockwool Firepro Ductrock Slab
Manufactured with high density, non-combustible stone wool insulation and finished with a high emissivity black foil facing. DuctRock Slab is easy to handle, simple to install and capable of achieving fire resistance of up to EI 120. Tested to both BS EN 1366:Part 1 and BS EN 1366:Part 8 and capable of providing up to 2 hours fire...
Rockwool Fire Duct Slab
Provides comprehensive performance for stability, integrity and insulation, for all ducts passing through fire-rated walls or floors. Fully tested to BS476-24 (duct types A and B) for preventing fire spread from one compartment to another. Three products are available in the Fire Duct Systems range, in a range of thicknesses: Fire Duct...
FSi RW4 Stonewool Acoustic Board
Versatile building slabs for a wide range of general building applications, for thermal, acoustic and fire resistant insulation in general building applications. Excellent thermal, acoustic and fire insulation Non-combustible – Euroclass A1 More Information Delivery Info