- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Collars, Wraps and Sleeves
Buy fire protection from Rawlins Paints. Our range of intumescent pipe collars, wraps and sleeves are for use around plastic and metal pipes, cables, conduits, and vent ducts, closing them off when attacked by fire to prevent the passage of smoke and flames through fire barrier. See here for related fire stopping products.
If you require more help to find and specify fire protection for your project or contract, our technical team are always on hand to advise. Give us a call on 0113 2455450 (option 2) or send a message to [email protected].
Astroflame Intumescent PFP Pipe Closer
Designed to maintain the fire resistance of fire rated walls and floors where these are breached by continuous plastic pipes. Can be used in gypsum, masonry and concrete walls and with concrete floors. CE Marked For pipe sizes from smallest pipes available to Ø315 mm with a wide range of pipe wall thicknesses Smaller pipes can be fitted...
Tenmat FF109 Vent Duct Fire Sleeves Low Profile
CE Marked fire penetration seals designed to firestop PVC ventilation ducts/pipes when installed through fire rated constructions. Fire rated product up to EI 120 minutes Tested for masonry, concrete and plasterboard walls Tested in external wall / SFS constructions Can be installed within Ablative Coated Fire Batts U/U -...
Quelfire QWR Fire Collars
Prevent the spread of fire where PVC, HDPE and PP pipes penetrate fire compartment walls and floors, for up to 4 hours (tested to BSEN 1366-3: 2009). Tested to Type X durability which means the QWR Fire Collars can be installed in conditions exposed to weathering, the Fire Collars should be used where a plastic pipe penetrates a fire rated...
Astroflame Intumescent PFP FR Pipe Wraps
Maintain the fire resistance of fire separating walls and floors when these are breached by plastic pipes, conduits or metal pipes with continuous combustible insulation, and may be used in drywalls, masonry or concrete walls and concrete floors. Each pipe wrap consists of a graphite based reactive intumescent strip, which reacts to heat and...
Astroflame X Series CE Intumescent Pipe Collars
Used around combustible pipes to form a penetration seal used to reinstate the fire resistance performance of wall and floor constructions, where they have been provided with apertures for the penetration of combustible pipe services. The collars include an intumescent component incorporated into a mild steel case to close any gaps and joints...
Astroflame X Series CE Intumescent Pipe Wrap
Used around combustible pipes to form a penetration seal used to reinstate the fire resistance performance of wall and floor constructions, where they have been provided with apertures for the penetration of combustible pipe services. They can be installed in flexible wall, rigid wall, rigid floor constructions and with Batt systems....
Nullifire FP170 Intucollar Intumescent Pipe Collars
Expands when exposed to fire, reinstating the fire performance of compartment walls and floors which have been penetrated by combustible pipes. Up to 4 hours fire resistance - Tested to EN 1366-3 Tested with combustible pipes (PVC, PE, PP, SanPVC, Bevex, etc.), insulated non- combustible pipes (steel) and network cable bundles (up to 125...
Astroflame Low Profile Intumescent Duct Sleeves
A more compact version of the original Astroflame Duct Sleeve that offers the same industry leading fire performance, maintain the integrity of fire rated walls penetrated by plastic ventilation ducts. In the event of a fire the intumescent material of the duct sleeve expands and crushes the plastic ventilation duct, closing off this route to...
FSi PipeBloc PCP Intumescent Pipe Collars
Designed and tested to seal service penetration apertures containing plastic and metallic pipes with insulation or cables. They are developed to provide a high volume expansion and pressure seal during a fire. The ultra thin design of the collars means the collar shell can give a depth of 30mm and 40mm ensuring that they can be installed into...
Tenmat FF109 Pipe Fire Sleeves
Designed to reinstate the fire resistance performance of wall and floor constructions where insulated metal or plastic pipes have been installed. CE Marked 4-in-1 Solution - Fire, Acoustic, Thermal and Vapour Seal Up to EI120 Minutes Fire Rating in Gypsum Walls and Solid Floors Up to EI240 Minutes Fire Rated in Solid Walls Assessed for...
Quelfire QRS Intumescent Fire Sleeves
Prevent the spread of fire where plastic ducts penetrate fire compartment walls, for up to 2 hours. Requires no mechanical fixing or framework support, relying on the fire rated wall construction, plasterboard or solid masonry/block (or QuelStop Fire Batt) to hold it in place. Slim version available for applications where there is limited...
Pyroplex Pipe Collars
Specifically designed to re-instate the fire resistance of a wall or floor which has been penetrated by plastic flammable pipes used in soil, waste and drainage services. They will seal closed flammable pipes from 55mm to 160mm diameter and can be face fixed to a wall or ceiling structure. Prevents the passage of fire and hot gases through...
Astroflame Thermal Fire Pipe Sleeve
A cost effective solution for the fire stopping of pipe penetrations, e.g. plumbing pipe and metallic pipes, whilst maintaining similar thermal and acoustic properties as standard mineral fibre insulation. These properties ensure compliance to water bye laws and building regulations for cold and hot water pipes and heating systems. CE...
Protecta FR Pipe Collars
Maintain the fire resistance of fire rated walls and floors, where breached by service penetrations, for up to 240 minutes. High end fast expanding patented graphite material Classified for fire sealing all types of constructions - drywalls, masonry & concrete walls, concrete & composite floors, & solid or cross-laminated...
Nullifire FP302 Intustrap/Band
A rubber based product with graphite impregnation that creates an extremely flexible pipe closure device. The product remains dormant, until exposed to fire conditions, at which point it will expand to fill the space left by the melting combustible element. FP302 has a release tape to one side. This permits the thermal expansion of services,...
Quelfire QRS Intumescent Slim Fire Sleeves
Prevent the spread of fire where plastic ducts penetrate fire compartment walls, for up to 2 hours (note: QRS220/90SS is rated 60 minutes only). They are specifically designed to be slim for applications where there is limited space around the duct. Requires no mechanical fixing or framework support, relying on the fire rated wall...
Astroflame Intumescent Duct Sleeve
Intended for use where a ventilation duct passes through a fire rated wall, maintaining the integrity of the fire rated wall which would otherwise be lost. In the event of a fire, the advanced Duct Sleeve will expand with the heat, crushing the duct and closing off the hole to the fire for at least 120 minutes except the 220x90mm version which...
Pyroplex Slimline Pipe Collar (200 Series)
Specifically designed to reinstate the fire resistance of a wall or floor which has been penetrated by plastic flammable pipes used in soil, waste and drainage services. The collars will seal closed flammable pipes from a 55mm to 160mm diameter and can be face fixed to a wall or ceiling structures. Fire resistance of up to 120 minutes...
Protecta FR Pipe Wrap
Maintain fire resistance of fire-separating drywalls, masonry or concrete walls and concrete floors up to 240 minutes when these are breached by services such as plastic pipes, conduits or metal pipes with continuous combustible insulation. Intumescent wraps simply fit around services, reacting in heat and expanding to fill softened pipes...
Pyroplex Pipe Wraps
Specifically designed to reinstate the fire performance of compartment walls or floors penetrated with plastic flammable pipes used in soil, waste and drainage applications. Achieved a fire rating of either 2 hour or 4 hour Easy to place around pipe and slide into position Intumescent material is totally unaffected by water, is robust,...
Rockwool Fire Tube
A range of simple to install, pre-formed cylindrical sections of non-combustible stone wool to suit standard steel pipe diameters. Designed to provide fire protection of up to 4 hours Fire Tube is suitable for use with structural steel, circular hollow sections (CHS), solid bars, sprinkler pipes and process pipework Available in both...
Nullifire FI025 Intuflex Wrap
Insulated pipe and cable wrap for preventing heat exchange in pipes and cable trays through fire barriers, walls and floors. For steel pipes, cable trays, cable ladders, cable baskets, steel trunking and movement sleeves. Can be cut for better accommodation, if required.
Rockwool Firepro Pipe Collar CE
A corrosion resistant powder coated steel sleeve, containing a flexible graphite based intumescent liner which is manufactured to suit standard diameter plastic pipework. Under fire conditions, the intumescent material within the collar expands, crushing the pipework and closing the void left by the pipework, preventing the passage of fire....
Quelfire QWW Intuwraps
Prevent the spread of fire through PVC, PVC-U, PE, HDPE, MDPE and PP pipes where they penetrate fire compartment floors. Suitable for use in concrete floors with plastic pipes in concrete floors providing up to 4 hours integrity. They are also tested in QF2 Fire Protection Compound seals and assessed for use in steel profile/concrete...
Nullifire FP220 Service Sleeve
A pipe closer device, comprising of an intumescent material within a stainless steel shell. Expands when exposed to fire, reinstating the fire performance of compartment walls which have been penetrated by combustable pipes Suitable for retrofit or inclusion prior to service installation, PE, HDPE, ABS, San+PVC, PP, PVC-C, UPONOR, DB, MLCP...
Tenmat Vent Duct OverSleeve
A firestop penetration seal designed to fit around Semi Rigid PE Ducting that pass through fire rated partitions. EI120 Fire Rating Can be retrofitted Low Profile Only one layer required No additional metal sleeving or support required Tested in min. 100mm Drywall / Solid Walls More Information Delivery Info
FSi PipeBloc PWP Intumescent Pipe Wrap
Designed and tested to seal service penetrations in apertures containing combustible plastic pipes. Developed utilizing specialist intumescent technologies which result in the wrap expanding in the presence of heat or fire, this expansion is fast acting and up to 25 times. To reinstate fire resistance through walls and floors To seal...
Quelfire QuelCoil Continuous Intuwrap
A universal intumescent pipe wrap used to maintain the fire rating of walls where they have been penetrated by plastic pipes and/or metallic pipes with combustible insulation, up to 2 hour fire rating (EI120). Cut to length on site to suit the specific pipe diameter and material. It can be used around insulated non-combustible pipes, directly...
Rockwool Intumescent Pipe Wrap CE
Designed to seal service penetrations in apertures containing combustible plastic pipes. Pipe Wraps CE comprise layers of a graphite based intumescent sheet encapsulated in a polythene sheath. They are tested to plastic services penetrating flexible andrigid wall constructions, rigid floors and in Ablative Coated Batt seals. Tested to EN...
Tenmat Oversleeve Pipe Sleeves
A universal, universal, one-product-fits-all solution for the firestopping of combustible and insulated metal pipes. Up to EI240 Minutes Fire Rating Thin/Low Profile (3mm thick) Can be retrofitted One Product Solution - suits a wide range of pipe materials, diameters & insulation types Simple Installation - no fixings, anchors or...
Astroflame X Series Intumescent Pipe Wrap UL
Designed and tested to seal service penetration apertures containing plastic and metallic pipes, pipes with insulation, using thermoplastic composites based on graphite intumescent technology. CE Marked Certifire Approved Can be installed in flexible wall, rigid wall, rigid floor constructions and with Batt systems Tested on a wide range...
Rockwool Intumescent Pipewrap Roll
Comprises an intumescent material made from elastomeric thermoplastic polymers combined with active components that provide a high volume expansion and pressure seal in the event of a fire. A simple and more economical alternative which eliminates the need to carry a wide range of individually sized fire stopping product solutions Suitable...
SikaSeal-629 Fire Wrap+
A fire resistant pipe wrap on a roll for interior and exterior penetration sealing applications, designed to provide a high volume expansion and pressure seal during a fire to combustible pipes that pass through floor and wall service openings. Now includes pre-sized fire wraps, previously known as SikaSeal 628, from 55mm up to 200mm Pipe...