- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Fire Stopping Adhesives
Fire-resistant adhesives for use with fire applications, fixing most coverings and materials to a wide range of surfaces and substrates for extra fire protection in new builds and retro-fitting projects.
Fire protection doesn’t have to be hard work, let our technical staff help you get the level of protection you require and the finish you want. If there is a product you cannot find, please contact our Technical and Sales Support Team on 0113 245 5450.
For clarification on minimum requirements before buying one of our fire-stopping products, please review the information provided in the 'DATASHEETS' tab on the product in question. A written specification should be obtained from our Technical Department for your project prior to use to ensure the product will be suitable.
Firefly High Temperature Adhesive
A single component, inorganic adhesive for bonding metals and other low absorbency materials with high temperature resistance. Used primarily to seal penetrations in Firefly Fire Barriers Non toxic, non hazardous Good electrical resistance Solvent resistance to most non-aqueous chemicals Silica based ceramic compound Up to 1100°C...
Protecta FR Adhesive
Fire-resistant adhesive with high bond strength, suitable for bonding and sealing. Compatible with mineral fibre boards, steel, timber, concrete, stone, brick, cement, plaster, metals, stone wool, glass, and ceramic. Withstands temperatures above 1,200°C, providing durable, heat-resistant bonds in fire situations. Instant grab, rapid...
Protecta FR IPT 4hr One Part Sealant & Adhesive
Fire-resistant sealant offering high-performance adhesion and sealing. Suitable for use on concrete, brick, stone, timber, plasterboard, metal, plastics, and various composite materials. Fire resistance up to EI 240 in compliance with EN 13501-2. VOC-free, environmentally friendly formulation with no hazardous emissions. Certified for...
Rockwool Firepro Glue
Water based, fire resistant adhesive suitable for use with FirePro Beamclad and Rockwool Fire Duct Systems where glued joints or noggins are required. Can be used in conjunction with other Rockwool Stone Wool products where there is a requirement for a fire resistant adhesive Authorised for use in LUL surface and sub-surface premises and...
Nullifire FO142 Intutac Brush Grade Silicate Adhesive
Bonds structural steel and ductwork protection boards in internal situations. Sodium silicate adhesive Bonds in 5 minutes Fully cured in 8 to 12 hours Forms a water-resistant seal unaffected by moisture Forms to a non-combustible film to BS 476 Part 4: 1970
Nullifire FO143 Intutac Gun Grade Silicate Adhesive
Silicate-based adhesive, which can be applied with a caulking gun. FO143 is used to bond different kinds of materials in the fire protection industry. Up to 240 minutes fire resistance Suitable for bonding Nullifire FJ203 Fire Resistant Backer Rod in concrete joints, rock fibre boards, or for materials that require bonding and resistance...
Hensel Hensomastik K 2000 Special Adhesive
Flexible special adhesive that bonds fire-protection boards with additional mechanical fixing, serves as an installation aid when working with insulating materials and assists when bonding and sealing fire-protection boards for the construction of ventilation systems. Classified in accordance with DIN EN 13501-1 as A2-s1, d0 when 400 g/m²...