- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Fire Stopping Coatings
Buy specialist fire stopping coatings at Rawlins Paints to protect non-combustible surfaces from the spread of fire. Our range of ablative sealant coatings are typically used to seal in compatible fire resistant bats in walls and floors, with long working lifespans that require no maintenance.
If you require more help to find and specify fire protection for your project or contract, our technical team are always on hand to advise. Give us a call on 0113 2455450 (option 2) or send a message to [email protected].
FSi Stopseal Ablative Coating
Highly advanced flexible coating for use when installing the Stopseal Batt System. The Stopseal Ablative Coated is used to seal in the Stopseal Batt to reinstate the fire resistance performance of wall and floor constructions where apertures are penetrated by single or multiple services. Simple to install, through spray or brush application...
Astroflame Fire Resistant Batt Coating Trowel Grade
1 part intumescent acrylic mastic - only compatible for use with Astroflame Fire Resistant Batts and cannot be used with any other Fire Batts - for sealing gaps around fire doors, linear joints, penetration seals, voids and irregular holes in fire rated structures. The sealant forms a char, preventing the passage of fire and smoke, when...
Protecta FR Coating
An ablative sealant coating applied by sprayer directly on to mineral fibres to enhance, seal and protect from fire by resisting flame spread, fire penetration & passage of hot gasses. Coated mineral fibres help prevent the spread of fire & smoke through openings in fire rated walls & floors, suitable for most surfaces including...
Rockwool Firepro Ablative Liquid
Water based, ready to use viscous paste which may be brush or spray-applied to stone wool slabs. Used to further improve the fire resistant properties of Rockwool stone wool slabs. The ablative nature of the coating resists flame spread and forms an insulated char which protects the stone wool slab.
Astroflame Fire Resistant Batt Coating Spray Grade
Water-based, acrylic, ablative coating - only compatible for use with Astroflame Fire Resistant Batts and cannot be used with any other Fire Batts - with excellent fire, water, air permeability and elastomeric properties. It prevents the passage of fire, air and sound between fire rated compartments and has been tested in block wall, concrete,...
Nullifire FS712 Intucoat Brush Grade
Water-based acrylic coating and adhesive, which may be used in conjunction with FB750 Intubatt, FB770 Intudeck and FJ220 Intubatt 3 as a bonding agent and a surface repair coating. Up to 4 hours fire resistance - Tested to EN 1366-4, EN 1366-3 and BS 476 Pt 20-22 in conjunction with FB750 Intubatt, FB770 Intudeck and FJ220 Intubatt 3 Used...
Astroflame PFP FR Board Coating
Spray grade ablative sealant coating - only compatible for use with Astroflame PFP Fire Resistant Boards and cannot be used with any other Fire Batts - designed to enhance, seal and fire protect stonewool fibres in Astro PFP FR Boards. Designed to be applied via spraying directly onto stonewool fibres, it resists flame spread and protects the...
FSi PS Coating
Ablative, highly advanced flexible coating used to apply to uncoated stonewool boards to reinstate the fire resistance performance of wall and floor constructions where apertures are penetrated by single or multiple services. Can be installed onto uncoated stone wool of a minimum thickness of 50mm and a minimum density of 140kg/m³...
Protecta Service Coating FR-1
Water-based intumescent coating for the fire protection of cables in a service installation. The coating upgrades the insulation and integrity of the installation and is non-toxic, emission free, durable and can be applied in one coat saving time and money. Can be used in combination with Protecta FR Board as a coatback on services to...
FSi Flexi Coat Flexible Ablative Coating
Highly advanced flexible penetration and aperture sealing system, supplied in the form of both completed pre-coated Flexi-Coat Fingers and as a coating to be applied to stone/mineral wool backing material. Tested in accordance with EN1364-4 and is third party certified. To reinstate fire resistance through walls and floors Movement seals...
Astroflame Penetration Seal Coating
A thicker formulation, for brush application, to coat plain stone wool as it is being installed by the user: it can also be be applied to insulation already in place on the services, adding to the fire resistance of the seal. Prevents the passage of fire, air and sound between fire rated compartments and has been tested in block wall,...