- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Page 2 - Fire Stopping
Subcategories
- Boards, Batts and Shuttering
- Collars, Wraps and Sleeves
- Door Seals and Hardware
- Electrical and Lighting
- Fire and Cavity Barriers
- Fire Stopping Accessories
- Mortars, Compounds and Putties
- Sealants, Adhesives, Foams and Coatings
- Service Transits, Pillows, Joint and Gap Seals
- Ventilation, Access Panels and Boxes
Norseal Pyrogrille 100 Air Transfer Grilles
Grilles with intumescent material for apertures within fire rated doors, walls and ducts, fixing securely with screws or pins. Used in conjunction with Norseal Pressed Steel Cover Grilles. Offers approx. 60% free area. Available in 25mm* or 38mm depths. Fire tested to BS EN 1634-1 in timber doorsets, offering up to 60 mins fire integrity....
Astroflame Fire Resistant Batt
Specifically designed for sealing around service penetrations in walls and floors, a single Astroflame board (50mm or 60mm thick) can provide high levels of fire integrity and insulation. Tested in Block Wall, Concrete, Masonry, Plasterboard Partition and tested in Concrete Floors. Astroflame Fire Resistant Batt Coating Spray Grade,...
Protecta FR Acrylic 4hr Intumescent Sealant
Designed to prevent the spread of fire and smoke through joints and openings in fire rated walls and floors including around building service penetrations. Classified for fire sealing all types of constructions such as drywalls, masonry walls, concrete walls, concrete & composite floors For fire stopping of service penetrations in...
Firefly High Temperature Adhesive
A single component, inorganic adhesive for bonding metals and other low absorbency materials with high temperature resistance. Used primarily to seal penetrations in Firefly Fire Barriers Non toxic, non hazardous Good electrical resistance Solvent resistance to most non-aqueous chemicals Silica based ceramic compound Up to 1100°C...
Nullifire FB750 Intubatts
Fully identifiable, fire resistant ablative skinned rock mineral wool boards used for fire protection of openings in fire barriers used for pipes and services to pass through. Refer to order references below Factory finished unique multilayered, low resin bonded, rock mineral fibre board Ablative coated on both faces with unique...
Astroflame Low Profile Intumescent Duct Sleeves
A more compact version of the original Astroflame Duct Sleeve that offers the same industry leading fire performance, maintain the integrity of fire rated walls penetrated by plastic ventilation ducts. In the event of a fire the intumescent material of the duct sleeve expands and crushes the plastic ventilation duct, closing off this route to...
Astroflame Intumescent Down Light Covers
Developed to cover maximum protection for holes created by the introduction of a downlighter and to allow for maximum ease of fitting. Downlight Fire Hoods fire rated to BS EN 1365-2:2000 / BS476 Part 23:1987 30 or 60 minute fire rating Covers a wide range of mains & low voltage downlighters Choice of 5 sizes Provides a highly...
FSi Pyrolastic Fire Resistant Silicone Sealant
One-part, neutral curing silicone for construction joints. Pyrolastic cures at room temperature under the action of atmospheric moisture to give a permanently flexible silicone rubber. Prevention of air leakage - Maintains acoustic performance, Assumed working life of 25 years Highly flexible - Cold smoke seal - Wide range of backing...
Tenmat Ceiling Fan Fire Stop
Developed to provide fire protection for penetrations made in floor/ceiling systems for 100mm and 125mm ceiling fans. Full scale fire tested to bs en 1365-2 on a loaded floor. 30 minute fire rating. Test evidence for use in solid timber, metal web joist and engineered i-beam floor/ceiling systems.
Rockwool 50mm Ablative Coated Batt
A high-density stone wool core, pre-coated on both sides with our high-performance ablative coating. Ablative Coated Batt has been comprehensively tested as part of the Rockwool Firepro range of fire protection products, specifically for use in service penetrations, head of wall and other void seals. Provides fire stopping solutions in...
Nullifire FR230 Intucompound Fire Mortar
Gypsum based mortar used to reinstate the fire resistance performance of floor & wall constructions where they have been breached with apertures for the penetration of single or multiple services. Up to 4 hours fire resistance - Tested to EN 1366-3 & 4 Provides a safe working platform for loads up to 2.5 kN/m² 1.21 m² without...
Protecta FR Damper
Fire proofs ventilation ducts that pass through fire-rated walls & floors, preventing spread of fire & smoke both surrounding & inside ducts. The steel casing contains horizontal steel blades treated with a technically advanced heat expanding graphite, closing off the damper in fire. Closes in the area where the fire is located...
Quelfire QuelStop Intumescent HPE Graphite Sealant
High expansion intumescent acrylic based graphite sealant used to provide a fire rated linear joint or gap seal and to maintain the fire rating of walls and floors where they have been penetrated by services as part of the QuelStop Fire Batt System or direct to the substrate. Up to 4 hours fire rating (EI240). May be used for sealing around...
FSi PipeBloc PCP Intumescent Pipe Collars
Designed and tested to seal service penetration apertures containing plastic and metallic pipes with insulation or cables. They are developed to provide a high volume expansion and pressure seal during a fire. The ultra thin design of the collars means the collar shell can give a depth of 30mm and 40mm ensuring that they can be installed into...
Quelfire CFC Ceiling Fan Cuffs
Prevents the spread of fire through ceilings where plastic ceiling fans penetrate the fire line plasterboard, with built in spring clips holding it to the plasterboard ceiling. Up to 90 minutes Integrity and Insulation.
Tenmat Firefly Fire Rated Ceiling Air Valves
Common sizes for both Extract and Supply. Suitable for installation in domestic homes, apartments, hotels, and other multiple occupancy buildings. Provides 60 minutes fire rating in solid timber joist floor/ceilings constructions and 30 minutes in I-beam and metal web joist floor/ceiling constructions. Integral intumescent material that...
Astroflame Thermal Fire Pipe Sleeve
A cost effective solution for the fire stopping of pipe penetrations, e.g. plumbing pipe and metallic pipes, whilst maintaining similar thermal and acoustic properties as standard mineral fibre insulation. These properties ensure compliance to water bye laws and building regulations for cold and hot water pipes and heating systems. CE...
Protecta EX Mortar Fire Rated Compound
A highly thermally-insulating fire sealing compound to prevent the spread of fire and smoke through openings in fire rated walls and floors. Use to seal up gaps around services such as cables, bundled cables, cable racks, cable trays, steel, copper, alupex, plastic pipes and air ventilation ducts on concrete, bricks, Leca, steel & plastic....
FSi Stopseal Ablative Coating
Highly advanced flexible coating for use when installing the Stopseal Batt System. The Stopseal Ablative Coated is used to seal in the Stopseal Batt to reinstate the fire resistance performance of wall and floor constructions where apertures are penetrated by single or multiple services. Simple to install, through spray or brush application...
Astroflame Intumescent Fire & Smoke Rated Telescopic Letterboxes
Robust commercial metal framed telescopic letterbox with metal flaps and a high performance intumescent liner, fire and smoke rated for 30 or 60 minutes. In the event of a fire the intumescent liner expands to seal the letterbox aperture and retains the fire integrity of the door. Fitted with brush pile draught excluders and sound dampening...
FSi PyroPro HPE Intumescent Graphite Sealant
Water based acrylic sealant used to reinstate the fire resistance of wall and floor constructions in apertures when penetrated by multiple services. Developed utilizing specialist intumescent technologies which result in the sealant expanding in the presence of heat or fire. Tested with a wide range of services, including plastic pipes,...
Astroflame Fire Resistant Batt Coating Trowel Grade
1 part intumescent acrylic mastic - only compatible for use with Astroflame Fire Resistant Batts and cannot be used with any other Fire Batts - for sealing gaps around fire doors, linear joints, penetration seals, voids and irregular holes in fire rated structures. The sealant forms a char, preventing the passage of fire and smoke, when...
Norseal Pressed Steel Cover Grilles
Offers an element of privacy, while maintaining the air movement between compartments. Can be used in isolation, for non-fire rated applications, or in conjunction with Pyrogrille 100 intumescent grille, to offer a fire rating up to 120 minutes integrity. Slim line design - unobtrusive. Depth of only 5mm protrusion from the door or wall...
Norseal Norsound NOR810
Aluminium and silicone gaskets for the bottom edge of acoustic timber doorsets. Suitable for use on most fire doors. Meets smoke requirements BS 8214 (NOR810S, NOR810S+). Compliant with BS 476-22 (NOR810). UL Approval (NOR810). Smoke tested in accordance with BS 476-31.1 (NOR810). Acoustically tested in accordance with BS EN ISO...
Quelfire QF2 Fire Protection Compound
Intended for use as a gap filling material where cables and pipework services penetrate fire compartment floors and walls. Up to 4 hours fire rating, tested to BS 476-20-1987 and BS EN1366-3-2009. It expands slightly on curing (0.1%), to form a rigid seal and is also suitable for use in load bearing situations. Subsequent to installation it...
Astroflame Intumescent Aluminium Door Edge Guards
Intumescent and smoke seals fully fire tested up to 1/2 or 1 hours and eliminate the need for repetitive maintenance. Fire tested to BS476 Part: 20 & 22 for 30-60 minutes and EN1634 to 30 mins Eliminate the need for repetitive maintenance Impact protection for both single & double fire doors Suits new & existing fire doors...
Firefly Phoenix Flexible Smoke & Flame Barrier
Lightweight flexible fire rated smoke and flame barrier designed to provide compartmentation within a building offering 120 minutes integrity only, when tested to BS476 Parts 20 & 22. Designed to work as part of a fire protection system and does not provide insulation properties Third Party Certification by IFCC 1418 Exceeds the...
Hodgson Sealants Firestrip 30/60
An Intumescent Strip Sealant to provide 30 and 60 minutes resistance to the passage of fire and smoke when used to glaze a wide variety of glass types into internal doors and softwood or hardwood timber screens. Fully tested to provide fire resistance to the passage of fire and smoke in timber doors and screens Non-toxic, quick, clean and...
Pyroplex Fire Rated Silicone Sealant
1 part, low modulus, neutral cure, halogen-free product suitable for the sealing of construction joints, and around pipe penetrations which have been protected by the recommended Pyroplex intumescent product. Ideal for the weathersealing of curtain walling, building facades and expansion joints in fire rated walls. Fire resistance up to...
Astroflame High Security Fired Rated Door Viewer
A door viewer with extra security features and designed for a wider range of users than standard door viewers. Fire Rated for 60 minutes - Timber Doors - and 30 minutes - Composite Doors Suits 35mm - 62mm thickness doors Person viewing can be seated or standing Well suited to wheelchair users or children Prism system permits viewer...
Firefly Galvanised Angles
An essential accompaniment for use during the installation of Firefly Fire Barriers. Available in 2 sizes: 25mm x 25mm x 1.2m (Pack of 10) 50mm x 50mm x 1.2m (Pack of 10) Galvanised Steel See the Order References Table below for further details Please refer to the Installation Guide/Installation Drawings for the relevant Firefly...
Sealmaster Intumescent Foam Glazing Tape
New black, low-medium pressure intumescent glazing tape material available on a roll for application to glazed apertures in fire resisting doors and screens. Specifically developed to ensure reliable fire performance when a cost effective foam glazing tape is required for a fire glazing application Developed to achieve successful fire...
Astroflame PFP FR Board Coating
Spray grade ablative sealant coating - only compatible for use with Astroflame PFP Fire Resistant Boards and cannot be used with any other Fire Batts - designed to enhance, seal and fire protect stonewool fibres in Astro PFP FR Boards. Designed to be applied via spraying directly onto stonewool fibres, it resists flame spread and protects the...