- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Flexcrete Products
Flexcrete Monolite
Flexcrete Monolite is a low density, high build, fibre reinforced, polymer modified shrinkage compensated mortar for non-structural repair of concrete, brick or stone. Incorporates the latest cement chemistry, microsilica, fibre and styrene acrylic copolymer technology and is easily overcoated with specialist membranes to provide further...
Flexcrete Monomix
A class R3 general purpose structural repair mortar - low density, high strength, shrinkage compensated, waterproof mortar for the structural repair, rendering and profiling of vertical, horizontal and overhead surfaces. The high bond strength of Monomix exceeds tensile strength of concrete, ensuring monolithic performance. Monomix is easily...
Flexcrete Fastfill
A portland cement based, high strength, fibre reinforced, rapid setting shrinkage compensated, waterproof mortar for structural repair of concrete. The bond strength of Fastfill exceeds tensile strength of concrete, ensuring monolithic performance. Incorporates the latest cement chemistry, microsilica, fibre and styrene acrylic copolymer...
Flexcrete Steel Reinforcement Protector 841
Flexcrete Steel Reinforcement Protector 841 is a polymer modified, cementitious anti-corrosion coating for the protection of steel reinforcement. Excellent adhesion to steel ensures adequate pull-off resistance is achieved, ideal for protection of steel reinforcement subjected to long term exposure. Pre-packaged material complete with...
Flexcrete Monolevel 844SP
Flexcrete Monolevel 844SP is a waterproof, engineering grade fairing coat & render for levelling concrete surfaces and filling blow holes, honeycombing and other surface defects. The bond strength of Monolevel exceeds tensile strength of concrete to ensure monolithic performance of the repair. Incorporates the latest cement chemistry,...
Flexcrete Cementitious Coating 851
Flexcrete Cementitious Coating 851 is a two component, polymer modified, cementitious waterproof coating for concrete and mineral substrates. Cementitious Coating 851 is easily overcoated with specialist membranes to provide further protection and an aesthetic finish. Incorporates the latest cement chemistry, microsilica, fibre and styrene...
Flexcrete Tiefill
A rapid setting polymer modified cementitious mortar for tie holes and small voids in new construction. Polymer modification gives Tiefill enhanced adhesion and low permeability, providing excellent protection from acid gases, moisture ingress and chlorides. Incorporates the latest cement chemistry, microsilica, fibre and styrene acrylic...
Flexcrete Polymer Admixture 850
Sealer and bonding agent for sand and cement mortars with excellent adhesion in dry, damp or permanently wet conditions to both concrete and steel. Can also be diluted with water to produce a primer for roof and deck applications in the clean water industry Can be mixed with cement to form a slurry for application to waterproof concrete...
Flexcrete Cure-Seal WB
Water-based curing compound and clear sealer for Flexcrete Repair and Protection Systems. Used as a curing membrane (conforms to the requirements for water retention given in ASTM C309), as a sealer coat for concrete, and as a clear lacquer which can be applied to damp but surface-dry substrates to form a tough, glossy finish. BBA Approved,...
Flexcrete Monomix HD
A class R4 high strength structural repair mortar that is hand or spray applied, shrinkage compensated, high strength waterproof mortar for the structural repair and reinstatement of concrete. Single component Standard density cementitious mortar Polymer modified and fibre reinforced Thixotropic - enables easy, high build hand and trowel...
Flexcrete Fastfill WP
Rapid setting water plugging mortar for arresting water seepage and infiltration under pressure through cracks, joints, and voids in concrete and masonry. Can also be used for rapid sealing and jointing in and around pipework on water retaining structures. Ideally suited for sealing in and around pipework and for forming fillets in tanking...
Flexcrete Cemprotec 2000-S
Composite elastomeric, tear-resistant, breathable, waterproof sealing tape. Permanently elastomeric composite tape exhibiting over 600% elongation Adhered using the Flexcrete range of polymer modifiedcementitious coatings to enable simple application Impermeable to water under 10 bar hydrostatic pressure (100m head of water) WRAS...
Flexcrete Cemprotec EF Primer
Water-based, modified styrene acrylic copolymer sealer and primer that stabilises and seals cementitious and asphalt substrates, used to to stabilise and seal cementitious and asphalt floors prior to the application of Flexcrete cementitious coatings. Purpose-deigned to minimise the risk of outgassing. Single-component, material is supplied...
Flexcrete Marine Mortar S
2-pack waterproof mortar for structural repair of concrete. For use in areas subject to early immersion and the repair of voids in marine environments. Portland cement based, high strength, fibre reinforced, rapid setting shrinkage compensated. Class R4 mortar, suitable for repair methods 3.1, 3.2, 7.1, 7.2 as defined by EN 1504-3.
Flexcrete Monolevel FC
Class R2 fairing coat and thin screed render. For levelling concrete surfaces and filling blow holes, honeycombing and other surface defects. Protects from the ingress of water and resists freeze/thaw damage. Suitable for repair methods 3.1, 3.3, 7.1, 7.2 as defined by BS EN 1504-3.
Flexcrete Monolevel RM
Pre-bagged waterproof one-coat cementitious render. Quickly applied as a one-coat render on vertical, horizontal and overhead surfaces by trowel or spray. One component, thixotropic, polymer modified, fibre reinforced. Cures rapidly. Suitable for use as ac a Category CS IV One Coat Render for External and Internal use on Walls as...
Flexcrete Monorub
Class R1 fine grade fairing coat. For the filling of blow-holes and small surface defects in precast and in-situ concrete to produce an aesthetic durable finish. Enhances adhesion and imparts a high degree of water repellency. Can be overcoated with specialist membranes in the Flexcrete range to provide further protection and aesthetic...
Flexcrete Cemprotec Elastic
Elastomeric cementitious flexible coating. Bridges minor cracks and protects conacrete or other mineral substrates from water penetration and carbon dioxide diffusion. Can also be used as a crack isolation membrane on concrete floors or screeds. Suitable for surface protection systems principles 1.3, 2.2,,8.2 as defined in BS EN 1504-2....
Flexcrete Cemprotec E942
2-pack cementitious coating for concrete and steel. For the protection of concrete and ferrous metals. Waterproof and protect concrete where enhanced chemical and abrasion resistance are required. Increases the effective concrete cover to steel reinforcement in new construction and refurbishment. Also used as a stand-alone anti-corrosion...
Flexcrete Cemprotec E Floor
Epoxy and polymer modified cementitious flooring system: 2mm. For waterproofing and protection of concrete floors and decks. High flow produces a smooth finish when applied by pouring or pumping techniques. Hard-wearing, durable finish offers enhanced chemical resistance. Suitable for trafficked areas in demanding internal and external...
Flexcrete Cemprotec Levelling Coat
Two-pack self-levelling cementitious coating and wearing screed. For levelling and waterproofing uneven concrete floors. Even finish with a slightly dimpled texture. Rapidly hardens to form a durable surface which resists abrasion and trafficking. May also be overcoated with resin coatings and screeds typically within 4-24 hours.
Flexcrete Monosil
Clear masonry waterproofing solution. For protection of stonework which is vulnerable to the effects of weathering. Imparts water oil repellence to concrete floors, car parking decks and other trafficked areas. Enhances freeze/thaw resistance. Minimal effect either on appearance or water vapour diffusion.
Need Help?
Need Help?
Buy world-class Flexcrete mortars and coatings for the repair and protection of concrete surfaces, here at Rawlins Paints. One of the UK's leading manufacturers of technical mortars and high performance coatings, Flexcrete specialised in concrete repair and protection in sectors that include:
- Civil Engineering & Infrastructure
- Buildings & Commercial Construction
- Utilities
- Hygiene Sensitive Environments
- Coastal Structures
Flexcrete's technical mortars and high performance coatings have been used on sites all around the UK, on new build and refurbishment projects such as:
- Buildings & Commercial Construction
- Heritage Structures
- New Build Construction
- Asbestos Encapsulation
- Waterproof Flooring Solutions
- Corrosion Protection
- Hygiene Sensitive Environments
- Coastal Structures
- Utilities
- Civil Engineering & Infrastructure
- Waterproofing of Roofs & Other Deck Areas
- Enhanced Durability for Concrete & Steel
- Structural Waterproofing and Tanking
- Decorative Protective Coatings
- Concrete Repair