- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Page 2 - Floor Preparation (Cleaners, Primers, etc.)
Subcategories
404S Epoxy Metal Primer
2 pack, high solids, epoxy, anticorrosive primer designed for the protection of steelwork, aluminium and galvanising. High Solids (>80%) Fast drying - touch dry following 4 hours cure @ 20ºC May be applied to damp or dry surfaces Excellent anti-corrosive properties Compatible with a wide range of top coats Long overcoating window -...
Watco Powerfloat Primer
An epoxy resin primer that allows smooth concrete to be painted without mechanical preparation. For priming power floated, very smooth or non-porous concrete floors which are prone to rejecting paint. Ready for overcoating in 12 hours Rapid version available, ready for overcoating in 4-6 hours Unique formula prevents paint peeling...
Sika Concrete Primer
Sika Concrete Primer, a two component, rapid curing, high solids, solvent based polyurea primer that is used as a bonding agent on cementitious substrates for Sikafloor 405/406. For Professional use Significantly reduces the likelihood of outgassing from susceptible substrates Seals and primes substrates enabling over-coating at a minimum...
Sikafloor 151
2 part, low viscosity, multipurpose, epoxy resin which can be used as an epoxy primer, levelling mortar and mortar screed. For priming concrete substrates, cement screeds and epoxy mortars. May only be used by experienced professionals. Low viscosity. Good penetration. Good bond strength. Easy application. Short waiting times....
Coo-Var Oil Remover
Aqueous cleaner designed for floors, walls, and other hard surfaces. Efficiently removes heavy oils, hydrocarbons, and ground-in dirt from concrete, brick, and breezeblock surfaces. Suitable for deep cleaning before applying coatings, seals, or other finishes. Removes slip hazards following leaks and spills.
707 MMA Metal Primer
A rapid curing three-pack primer for steel, galvanised steel, aluminium, and unglazed ceramic tiles to be used prior to any of the MMA range of coatings, mortars, and screeds. Rapid cure, even at low temperatures - from as low as -30°C* Very good corrosion resistance Excellent adhesion Impervious to water Pre-packed units ready for use...
Sikafloor 220 W Conductive
2 part, water dispersed, epoxy resin primer with high electrostatic conductivity. Must be applied as a primer underneath all Sikafloor conductive wearing courses on concrete and cementitious screeds for different types of industrial use. Highly electrostatically conductive Easy application Economical in use Solvent free
Rust-Oleum 5421 Epoxy Floor Primer Rapid
Two component epoxy floor primer – available in amber. For porous mineral surfaces like concrete. Rapid curing, recoatable in 4 hours. Impregnates porous and brittle floors. Easy all-in-one packaging.
Sikafloor 169
2-part, very low yellowing, low viscous, transparent epoxy resin binder for mortars, screeds and seal coats like Sika CompactFloor and Sika Decofloor. Transparent Low VOC-content Low yellowing Good mechanical and abrasion resistance Low viscous Easy application Multi-purpose binder Note: made to order, with an approx. 10-14 day lead...
708 MMA Tarmac / Asphalt Primer
2-pack substrate specific primer for Tarmac and Asphalt, being used prior to any suitable Rawlins MMA product. It exhibits fast curing characteristics allowing rapid application of subsequent coatings, mortars or screeds. Rapid cure, even at low temperatures Very flexible Very good chemical resistance Excellent adhesion Impervious to...
Watco Concrete Cleaning Solvent
A xylene based solvent for bare or painted concrete to help with cleaning and preparation. Ensures thorough adhesion of self-adhesive Watco Safety Tapes and Treads Use to thin Watco solvent based, including polyaspartic products Removes dirt and dust prior to painting Cleans paint spills and application tools More Information...
Coo-Var Oil Tolerant Primer
Clear two-component oil-tolerant primer. Improves adhesion on surfaces contaminated with oil. For metal and concrete surfaces. Excellent chemical resistance.
Sika Concrete Primer LO
2 component, low odour, rapid curing, high solids, hybrid polyurea primer used as a bonding agent on cementitious substrates for consistent and durable adhesion of Sikaroof, Sikalastic and Sikafloor Systems. Low odour application Fast curing - overcoating possible after 30 minutes Significantly reduces the likelihood of out-gassing from...
Watco New Concrete Primer
Primes and seals newly laid concrete for early painting. Suitable for areas subject to heavy traffic. Withstands 98% relative humidity Saves waiting for new concrete to dry out Can be applied to damp surfaces Overcoat in just 16 hours Can be used with underfloor heating systems Note: While great care is taken with the colour...
Sikafloor 10 Pronto
4-part, low-viscosity, fast curing primer based on reactive acrylic resins with enhanced substrate adhesion for the Sikafloor Pronto Modular System. Very fast curing, even at low temperatures Enhanced adhesion for ceramic substrates or metal Solvent-free Part of a complete modular system Sikafloor 10 Pronto consists of: Part A:...
Swarco Hitex Swarcoplast Primer Roll 120
Primer for Swarco Hitex Puma MMA systems on metal and concrete substrates (e.g. iron, aluminium, stainless steel), with excellent adhesion. Previously known as CM Primer Easy to apply Separate hardener (Hitex BPO Powder Catalyst) required, levels depend on substrate temperature More Information Delivery Info Hitex BPO Powder Catalyst...
Sikafloor 32 Pronto
2-part PU modified PMMA elastomeric binder for self-smoothing screed, broadcasted systems and levelling mortars based on reactive acrylic resins for flooring and car park deck application. Sikafloor 32 Pronto consists of: Part A: Sikafloor 32 Pronto Resin Part B: Sikafloor Pronto Hardener Please Note: 200KG Size is only available on a...
SmartSeal Driveway Cleaner
Fast acting biological degreaser. Accelerates degradation of oil and stains. For block paving, concrete, tarmac and natural stone. Not flammable, combustible or corrosive.
SmartSeal Xtreme Drive Cleaner
Driveway cleaner for block paving. For concrete and natural stone. Fast acting, high performance. Inhibits growth of moss, grime, algae and more. Important! Not recommended for use on tarmac.
SmartSeal Oil Remover (Tarmac & Asphalt)
Oil stain remover for tarmac and asphalt driveways. For exterior use. Will not erode or degrade the surface. Biological, biodegradable.
Flowcrete Hydraseal DPM
2-component epoxy resin in red, yellow or natural, moisture barrier for cementitious substrates. Ideal for damp concrete surfaces where conventional primers fail. CE certified and solvent-free, ensuring environmental safety and minimal odour. Restricted to professional use.
Flowcrete Flowprime
2-component low viscosity epoxy resin primer for cementitious substrates, in a transparent finish. Ideal for priming concrete and screeds before overcoating with resin toppings. Solvent and Nonyl Phenol-free, ensuring a practically odourless application. Accredited to EN 13813 for high performance and quality. Restricted to professional...
Weber Weberfloor DPM Pro
Two-component epoxy-based damp proof membrane. For concrete and cement-based screeds. Suppresses residual moisture.
Ronacrete RonaDeck Resin Bonded Steel Primer
Single component polyurethane primer for steel surfaces. Available in silver grey. Designed for prepared steel, including shot-blasted and degreased surfaces. Fast curing, enabling early application of RonaDeck Resin Bonded Surfacing. Excellent adhesion, forming a reliable bond with steel substrates. Suitable for professional and...
Ronacrete RonaDeck Resin Bonded GP Primer
Two-component, solvent-free, clear epoxy primer for surface damp or porous concrete and screeds. Ideal for concrete, screeds, and porous substrates; enhances adhesion and prevents pinholing and blistering. Moisture-tolerant; suitable for surface damp conditions, ensuring reliable application performance. Low odour and solvent-free...