- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
HMG Products
HMG Coach Enamel
HMG Coach Enamel is traditional, ultra high quality, high build, long oil synthetic enamel for brush application. It gives an extra long wet edge time allowing it to be brushed without brush drag. High gloss Excellent water resistance Flexible with good exterior durability and toughness Available in 3,500 colours from RAL, NCS, and...
HMG C71 Speedline
HMG C71 Speedline is a high quality, single pack, synthetic alkyd enamel suitable for brushing or spraying. Offers fast surface drying, good through drying (even in thick films), and a hard, tough finish, with minimal yellowing even at high temperature - ideal for machinery, appliance and agricultural projects. For use on ferrous and...
HMG PVC17 Colours
Single pack vinyl acrylic in 5,000 colours for direct application to many difficult to coat substrates including hard plastics, powder coatings, most factory finishes and architectural cladding. Also suitable for flexible substrates, PVC curtain material, uPVC, plastisol, cladding coatings and fibreglass* *for areas incorporating draught...
HMG 1K DTM 30 Colour
HMG 1K DTM 30 Colour is a single pack direct to metal compliant coating, giving good corrosion and early moisture resistance, ideal for application direct to metal as a single coat primer finish for use on skips, containers, agricultural and construction vehicles and machinery. Low Odour Improved performance at higher film weights...
HMG Thinner 2611
HMG Thinner 2611 is a medium thinner. For use with compatible HMG systems.
HMG Vinyl Matt Emulsion
Premium quality water-based, flat matt emulsion in 3,500+ colours. For interior use on wall and ceiling surfaces, where a flat non-reflective finish is required. Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour. Order a Colour Sample
HMG Polyurethane Floor Paint
Designed to provide a hard wearing yet economical surface coating. Its durability is achieved by the use of excellent quality resins, which also provide the user with a product that is very easy to use. Application via Brush or Roller
HMG SPS30 Primer Finish
HMG SPS30 Primer Finish is a quick drying SPS (Single Protection System) single coat finish offering excellent performance. Provided with a sheen level of 30% finish Hard dry in as little as 60 minutes at 20℃ Touch dry in 30 mins at 20℃ Coverage up to 8-10m2 per litre Flashpoint: 24℃ Available in 5,000+ colours from RAL, NCS, and...
HMG Industrial Cellulose
HMG Industrial Cellulose is a fully comprehensive range of clear and pigmented lacquer finishes for high quality industrial finishing of all types, particularly over both hard and softwood substrates. Available in 3,500+ colours, inc. RAL Classic, BS, NCS & the new NCS 2050 colours Good coverage, up to 10 square metres per litre...
HMG Synthetic BDX Primer
HMG Synthetic BDX Primer is a high build, anti-corrosive, single pack alkyd primer for use under all HMG synthetic topcoats, combining high build and excellent sandability with outstanding application and scratch filling properties. For use on suitably prepared structural steel, chassis, fabrication and aluminium Can be applied to bare...
HMG Thinner 2621
HMG Thinner 2621 is a thinner for use in various applications. For use with compatible HMG systems.
HMG Pre Cat AV Colours
HMG Pre Cat AV Colours is a fast drying 1K lacquer with good film build and excellent application characteristics. Formulated for use on wood substrates For interior use only Available in 5,000+ colours from RAL, NCS, and British Standard Also available as an aerosol, please see HMG Pre Cat AV Colours Aerosol Please note: Colours are...
HMG Stoving Enamel
HMG Stoving Enamel is a high performance, rapid curing, high build, general purpose stoving enamel. Stoving paints are for force-drying; for painting stoves, see our heat-resistant paints Combines excellent colour and gloss retention together with good physical properties. Suitable for most domestic and industrial applications. Offers...
HMG QAD Enamel
HMG QAD Enamel is an industrial, durable, high gloss, tough alkyd for use on spray applied steel, railings, exterior furniture and fencing plus other suitable prepared metals. Quick drying - touch dry in 30 minutes Coverage: 11-12m² per litre at 20 microns dft, 10-12 m² per litre at 55 microns dft Can be applied to mild, galvanised and...
HMG Ferrozinc Rust Converter
HMG Ferrozinc Rust Converter is a high performance water-based rust converter, ideal for application to areas difficult to shot-blast or where total removal of rust is not possible. Also suitable for surfaces difficult to dry due to existing moisture. Easily applied single pack material Changes colour to show rust has been neutralised...
HMG Waterborne LMP Colours
HMG Waterborne LMP Colours is a high quality 1K water-based acrylic based paint range offering excellent drying characteristics. Excellent adhesion to a wide variety of substrates and ease of brushability. Developed as an alternative to solvent based alkyd synthetic enamels for situations where its particular properties are preferred....
HMG HB48 Primer
HMG HB48 Primer is an alkyd based, quick drying primer offering outstanding adhesion, moisture resistance and corrosion protection due to incorporation of modified Zinc Phosphate. Suitable for structural steelwork, chassis, steel fabrication, mild steel, shot blasted steel, aluminium & galvanised steel Easy to apply without fear of...
HMG D66 Economy Line
HMG D66 Economy Line is an alkyd based synthetic enamel designed for general purpose brush and spray requirements. It is also oil and diesel resistant making it a good choice for agricultural, appliance & machinery finishes. Good performance Oil and diesel resistant Quick drying agricultural paint Quick drying appliance paint...
HMG Thinner 2691
HMG Thinner 2691 is a thinner for use in various applications. For use with compatible HMG systems.
HMG Thinner 2661
A standard thinner that, when used with HMG PVC 17, allows for direct application of 5,000 colour options in temperatures in excess of 25⁰C on hard-to-coat surfaces such as hard plastics, powder coatings, most factory finishes, and architectural cladding.
HMG Waterborne Smooth Masonry Paint
High opacity acrylic durable coating for exterior masonry in 3,500+ colours. Good coverage, up to 10 square metres per litre Touch dry in as little an 1 hour, ready for recoating Brush or roller application Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour....
HMG Hardener 9061
HMG Hardener 9061 is a 2k polyamide hardener for use in recommended HMG systems. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Nisocoat 2 Hardener (Part 2) HMG Hardener 9061 Part two of a two part pack....
HMG Thinner 2641
HMG Thinner 2641 is a medium fast thinner. Designed for use with cellulose based systems.
HMG HB05 Primer
HMG HB05 Primer is an alkyd based, high build primer offering outstanding adhesion, moisture resistance and corrosion protection due to incorporation of modified zinc phosphate. Designed for airless or conventional application for structural steelwork, chassis, steel fabrication etc. It is easy to apply without fear of runs or sags at...
HMG Thinner 2612
HMG Thinner 2612 is a slow thinner. For use with compatible HMG systems.
HMG Hammer Finish QAD
HMG Hammer Finishes QAD are used to produce an attractive and durable special effect hammer finish, which will hide imperfections on marked, pitted, or uneven surfaces of all types. Excellent drying gloss, adhesion and weathering properties Available in a range of colours with an attractive hammer finish For application on a wide variety...
HMG KX Undercoat
HMG KX Undercoat is a high build polyurethane alkyd undercoat. Offers excellent wet edge characteristics and superb topcoat holdout Formulated for use under all HMG Synthetic topcoats Available in 5,000+ colours from RAL, NCS, and British Standard Also available as an aerosol, please see HMG KX Undercoat Aerosol Please note: Colours...
HMG Mordant T Wash
HMG Mordant T Wash is designed for use as an etching solution for galvanised steel & zintec. Manufactured to a formulation originally developed by the British Rail Board
HMG Hardener 9004 Standard
HMG Hardener 9004 Standard is a medium solids isocyanate hardener. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Acrythane SC601 Colours HMG Acrythane 102 HMG 2K Multi Surface Topcoat HMG Polykote 2K AMC Primer...
HMG SAH300 Enamel
HMG SAH300 Enamel is a high solids, gloss 1K polyurethane alkyd designed for brush application. Excellent protection against harsh weather conditions, atmospheric pollution, road dirt, sharp cleaning agents and mechanical car washes etc Available in 5,000+ colours from RAL, NCS, and British Standard Also available as an aerosol, please...
HMG Nisocoat 2
HMG Nisocoat 2 (Base) is a 2K non-isocyanate acrylic product formulated to provide a tough, chemically resistant, high quality coating. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Nisocoat 2 Hardener (Part 2) HMG...
HMG Cellulose APS Primer
HMG Cellulose APS Primer is a quick drying cellulose primer for use in aerosols, classic car refinish and industrial applications. Available in grey or white Also available as an aerosol, please see HMG Cellulose APS Primer Aerosol Order a Colour Sample
HMG AR141 Matt Black Aerosol
HMG AR141 Matt Black Aerosol is an air dying silicone based paint specifically formulated to enable the dried film to tolerate high temperatures up to 300ºC. For the non-aerosol version of this product please see HMG AR141 Matt Black. 400ml/16oz Aerosol The full physical properties are achieved after baking at temperatures above 220ºC (at...
Need Help?
Need Help?
Rawlins Paints stock the UK's leading and highly specialised HMG superior performance paints, powder coatings and aerosols, with many available in thousands of RAL, BS & NCS colours, for industrial and commercial sectors that include:
- Commercial Transport, Rail, OEM, Industrial
- Bus & Coach, Civil Engineering & Construction
- Light Industry, Marine, Aerospace
- Defence, Model & Hobby trade, Automotive Finishes
"One name that covers everything", HMG have a product for every substrate. Each product has its own technical and safety data sheets available under the "attachments" tab on the respective product page; for more information, our technical team are standing by and available to contact on 0113 2455450 (option 2) or send a message to [email protected].
The UK's largest independent paint manufacturer, HMG established itself in Manchester in 1930 and have accepted numerous awards such as the UK Coatings Care award and were the first independent UK Paint Company to be awarded British Standards quality BS5750 (FM1524).
With a product available for every substrate, Rawlins Paints offer HMG products in thousands of colours from RAL, British Standard (BS) and NCS ranges from flat matt finishes through to high glosses, plus:
- Hammer
- Leatherettes
- Textures
- Metallic
- Clear Lacquer
- Antique
- Low Cure Anti-Gassing
HMG Paints manufacture their own powder coatings, an advanced method of applying a decorative and protective finish to a wide range of materials and products that are used both by industries and consumers, giving a much wider range of coating options.
The 3 main types of Powder Coatings available are:
Epoxy (The original powder finish)
Epoxy coatings are based on epoxy resin, they are manufactured in a way which enables the possibility of coating to a high thickness without defect in the coating after curing.
Epoxy Polyester (For more weathering and flexibility properties)
Epoxy-polyester powder coating is based on specially selected resins to give the hard durable finish associated with epoxy coating, but with superior heat stability and exterior durability.
Polyester (Full polyester offering improved durability)
Polyester powder coating is designed for external use, and the most characteristic feature of polyester powder coatings is the very good colour and gloss retention in outdoor exposure, where UV stability and weather resistance is required.
At Rawlins Paints you will also find HMG primers (for powder coatings, giving increased corrosion resistance), long-lasting topcoats (particularly for harsh exterior environments) and high quality metallic finishes. For more help, discuss your project with our on 0113 2455450 (option 2) or send a message to [email protected].