Follow us on:

Rustins Wet Rot Wood Hardener

RUSWDHD
BON10925

Rustins Wet Rot Wood Hardener is a solvent-based moisture-curing reactive polymer solution designed to penetrate deeply into and harden rotten or decayed wood. Once fully dried, the polymer strengthens and reinforces the deteriorated wood to support the use of wood filler and provide a seal against further moisture penetration.

  • Suitable for interior and exterior use
  • Optimises the service life of a rotten wood repair
  • Cost effective alternative to joinery replacement
  • Can dry in 2 hours to allow rapid completion of repair work
  • Easily applied
  • Deep penetration

Size
£39.79(incl. VAT)
£33.16(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

Description



Quick Links - Click To Jump To Section:




Features & Benefits


  • Suitable for interior and exterior use
  • Optimises the service life of a rotten wood repair
  • Cost effective alternative to joinery replacement
  • Can dry in 2 hours to allow rapid completion of repair work
  • Easily applied
  • Deep penetration



Product Specifications


Technical Data
Rustins Wet Rot Wood Hardener
Coats Multiple coats. This is a continuous application process
Drying Time 5 minutes. Allow a minimum of 2 hours before applying wood filler over Rustins Wet Rot Wood Hardener or until hardener film becomes fairly touch-dry.
Re-coating Time 5 minutes. Allow a minimum of 2 hours before applying wood filler over Rustins Wet Rot Wood Hardener or until hardener film becomes fairly touch-dry
Application Temperature Ideally between 15-25ºC. Do not apply below 10ºC
Coverage Not applicable. Dependent on condition of rotting wood
Maintenance Not applicable
Compatibility Avoid contact with metal, glass, plastic and painted surfaces
Settlement Shake well before use
Shelf Life Many years if suitably stored unopened in original container. NOTE: this is a moisture-hardened product so storage life of opened tins is limited



Application


  • Remove loose, decayed or very soft wood until a fairly sound base is exposed
  • Rustins Wet Rot Wood Hardener is moisture-hardened, however the wood should be reasonably dry and free from grease, dirt and oil
  • Shake well before use
  • Apply liberally by brush, saturating the wood
  • Wait until each coat has been absorbed by the wood and reapply
  • Ideally this should be done as a continuous process for maximum penetration depending on the absorbency of the wood
  • Continue with repeated applications until a surface film is formed



Health and Safety


  • Flammable
  • Irritant
  • Avoid contact with eyes and skin
  • Wear protective gloves and eye protection
  • In case of contact with eyes, immediately rinse with plenty of water and seek medical attention
  • After contact with skin, wash immediately with soap and water or a suitable skin cleanser
  • Keep out of reach of children
  • Avoid ignition sources
  • Do not spray
  • Do not inhale vapour
  • Further information can be found in the product data sheet and safety data sheet
Product Details
10925-1004595

Data sheet

Manufacturer
Rustins
For Use By
Professional Use
Interior / Exterior Use
Interior & Exterior
Water / Solvent Based
Solvent
For Use On
Wood
Application Method
Brush
Single, Two or Three Pack
Single
Pack Size
250ml, 500ml
Coverage
Not applicable. Dependent on condition of rotting wood
Min. Application Temperature
Ideally between 15-25ºC. Do not apply below 10ºC
Shelf Life (from date of manufacture)
Many years if suitably stored unopened in original container
UN Number
UN1263
Drying time
5 minutes. Allow a minimum of 2 hours before applying wood filler over Bonda Wood Hardener or until hardener film becomes fairly touch-dry
Dry to Recoat
5 minutes, (see above). Allow a minimum of 2 hours before applying wood filler over Bonda Wood Hardener or until hardener film becomes fairly touch-dry
Base Type
Solvent-Based
Suitable For Use On
Wood
Application Method
Brush
Product Usage Type
Hardener
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send

IMPORTANT SHIPPING & DELIVERY INFORMATION

Rustins Wet Rot Wood Hardener is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT