Astroflame Clad Ventilated Fire Barriers prevent fire spread and provide compartmentalisation in the external façade. It is essential that the correct fire barriers are specified and installed.

• Creates a ventilated fire barrier within external wall systems
• Tested on Timber and Masonry external wall systems
• Suitable for ventilated cavities from 25mm up to 450mm
• Independently fire tested to BS476: Parts 20 or ASFP TGD 19
• 30-120 minutes rating (dependent on substrate)
• For horizontal application

Available Options

Astro Clad - AFFRCLAD35

• To suit up to 25mm cavities
• Tested for up to 60 minutes
• Quick & Easy Installation
• Satisfies Building Regulations
• BS476: Parts 20 and 22, EN1363-1: 1999
• Tested and proven to reinstate the fire resistance performance within “open-state” external wall cavities for periods up to 60 minutes, for both integrity and insulation to the principles of EN 1363-1 and in accordance with ASFP TGD 19 guidance
• Fire & Age Tested
• Horizontal use only

Astro Clad - AFFRCLAD75

• Suitable for “open-state” ventilated cavities up to 50mm wide
• 3rd party certification from IFC (Held by manufacturer)
• An “open state” cavity fire barrier for use horizontally within uninsulated, ventilated and drained cavities
• Fire Rated for up to 120 minutes for both integrity and insulation when tested to the general principles of BS EN 1363-1 following ASFP TGD 19 guidance
• Ventilated design – developed to allow maximum ventilation and drainage of cavities reducing the need for cavity trays or weepholes
• Provided in strips of 1m long, 75mm wide and 6mm thick
• Lightweight – designed to be easily and quickly installed
• No maintenance required after installation
• Horizontal use only

Astro Clad - CavGuard Roll 65 AFCFBR65

• Suitable for ventilated cavities up to 65mm wide, including building tolerances of up to 15mm (50mm + 15mm)
• A fire rated product, providing fire resistance performance within external wall cavities, for periods up to 60 minutes (EI60)*
• Suitable for masonry and brickwork external substrates only
• Ventilated design – developed to allow maximum ventilation of uninsulated cavities reducing the need for cavity trays or weepholes
• Flexible and lightweight – designed to be easily and quickly installed
• No maintenance required after installation
• Provided in rolls of 6.3m long
• Integrity and insulation performance is measured from the point of closure as per TGD19:2017 requirements

Astro Clad – AFFRCLADX

PRICE ON APPLICATION ONLY

• To suit from 60mm up to 450mm cavities
• Typical Fire Ratings of minimum 30 to 60 minutes Integrity and Insulation
• Higher Fire Ratings available dependent on application
• Maintains a 44mm air gap
• Up to 450mm cavities tested
• Standard thickness of 75mm
• Durability and Age Tested
• Fixing brackets included as standard
• Undergone extensive fire testing following the principles of BS EN1363-1 and in accordance with ASFP TGD19 (Fire Resistance Test for ‘Open-State’ Cavity Barriers)
• Horizontal use only

Astro Clad – AFFRCLAD6060

PRICE ON APPLICATION ONLY

• To suit up to 450mm cavities
• 3rd party certification from IFC (Held by manufacturer)
• Typical Fire Ratings of minimum 60 Minutes Integrity and Insulation
• Higher Fire Ratings available dependent on application
• Maintains a 25mm air gap
• Up to 450mm cavities tested
• Standard thickness of 75mm
• Durability and Age Tested
• Fixing brackets included as standard
• Horizontal use only

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.