- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A two-component, high-gloss, and high-solid polyurethane topcoat in 350+ colours, which can be easily sprayed with conventional as well as airless equipment. The coating has excellent flow and application properties which provides a smooth, durable, and easy to clean surface.
Please note: Colours are Made To Order subject to a MOQ of 80 units and an extended lead time of 10 working days
- Replaces Nullifire TS134 Acrylic Polyurethane Top Seal
- Excellent weatherability
- Excellent flexibility
- Excellent abrasion resistance
- Easy application with airless and conventional equipment
- Suitable for plural component and electrostatic spray
- VOC compliant to current AIM regulations
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Carboline Carbothane 134 HP, also known as Nullifire TS134 Acrylic Polyurethane Top Seal is a two-component, high-gloss and high-solid polyurethane topcoat, which can be easily sprayed with conventional as well as airless equipment. The coating has excellent flow and application properties which provides a smooth, durable, and easy to clean surface.
Click To Jump To Section:
- Features and Benefits
- Product Specification
- Drying Times
- Surface Preparation
- Application Methods
- Application Conditions
- Health and Safety
Features and Benefits
- Excellent weatherability
- Excellent flexibility
- Excellent abrasion resistance
- Available in RAL colour shades
- Easy application with airless and conventional equipment
- Suitable for plural component and electrostatic spray
- VOC compliant to current AIM regulations
Product Specification
| Technical Data | ||||||
|---|---|---|---|---|---|---|
| Carboline Carbothane 134 HP | ||||||
| Volume Solids: | 65% ± 2% | |||||
| Theoretical Coverage Rate: | 8,6 m² at 75 microns | |||||
| Allow for loss in mixing and application | ||||||
| Dry Film Thickness: | 75 microns per coat | |||||
| Do not exceed 150 microns in a single coat | ||||||
| Dry Temperature Resistance: | Continuous: 93°C | |||||
| Non-Continuous: 121°C | ||||||
| Discolouration and loss of gloss may occur above 93ºC | ||||||
| VOC Values: | As supplied: 300 g/l | |||||
| These are nominal values and may vary slightly with colour | ||||||
| Shelf Life: | 24 months at 24°C | |||||
| Storage Temperature and Humidity: | 4°C - 43°C | |||||
| 0-80% Relative Humidity | ||||||
Drying Times
| Curing Schedule | ||
|---|---|---|
| Surface Temp. and 50% Relative Humidty | Dry to Handle | Final Cure |
| 4°C | 18 hours | 14 days |
| 10°C | 8 hours | 7 days |
| 24°C | 4 hours | 3 days |
| 32°C | 1 hour | 1 day |
- These times are based on 50-75 microns dry film thickness. Higher film thickness, insufficient ventilation or cooler temperatures will require longer cure times and could result in solvent entrapment and premature failure
Surface Preparation
General
- Surfaces must be clean and dry
- Employ adequate methods to remove dirt, dust, oil and all other contaminants that could interfere with adhesion of the coating
Steel
- Prime with specific Carboline primers as recommended by Rawlins on Tech - 0113 2455450 (option 2) or [email protected]
Galvanised Steel
- Sa1 and prime with specific Carboline primers as recommended by Rawlins
Aluminium
- Sa1 and prime with appropriate Carboline primer as recommended by Rawlins
Previously Painted Surfaces
- Lightly sand or abrade to roughen and de-gloss the surface. Existing paint must attain a minimum 3B rating in accordance with ASTM D3359 “X-Scribe” adhesion test
- Prime with specific Carboline primers as recommended by Rawlins
Application Methods
| Product Information | |
|---|---|
| Mixing: | Power mix Part A separately, then combine with Part B and power mix |
| Do not mix partial kits | |
| Thinning: | Spray: up to 15% with Thinner 25 |
| Roller: up to 10% with Thinner 215 | |
| Use of thinners other than those supplied or recommended by Carboline may adversely affect product performance and void product warranty, whether expressed or implied | |
| Ratio: | 4:1 (A to B) |
| Pot Life: | 4 Hours at 24ºC and less at higher temperatures |
| Pot Life ends when coating becomes too viscous to use. Moisture contamination will shorten Potlife and cause gellation | |
| Conventional Spray | Pressure pot equipped with dual regulators, 3/8” I.D. minimum material hose, .070” I.D. fluid tip and appropriate air cap |
| Airless Spray: | Pump Ratio: 30:1 min |
| Volume Output: 3.0 gpm min | |
| Material Hose: 3/8” I.D. min | |
| Tip Size: .015-.017” | |
| Pressure: 148-162 BAR | |
| Filter Size: 60 mesh | |
| Brush and Roller: | Multiple coats may be required to obtain desired appearance, recommended dry film thickness and adequate hiding. Avoid re-brushing or re-rolling. For best results, tie-in within 10 minutes at 24°C |
| Brush: | Recommended for touch-up only. Use a medium, natural bristle brush |
| Roller: | Use a short-nap mohair roller cover with phenolic core |
Application Conditions
| Product Conditions | |||||
|---|---|---|---|---|---|
| Condition | Material | Surface | Ambient | Humidity | |
| Normal | 16 -29°C | 16 -29°C | 16 -29°C | 40-60% | |
| Minimum | 10°C | 4°C | 4°C | 10% | |
| Maximum | 38°C | 49°C | 35°C | 80% | |
- Industry standards are for substrate temperatures to be 3ºC above the dew point
- This product is moisture sensitive in the liquid stage and until fully cured. Protect from high humidity, dew, and direct moisture contact until fully cured
- Application and/or curing in humidity above maximum, or exposure to moisture from rain or dew may result in a loss of gloss and/or micro bubbling of the product
Health and Safety
Clean Up
- Use Thinner 2 or Acetone
- In case of spillage, absorb and dispose of in accordance with local applicable regulations
Safety
- Read and follow all caution statements on this product data sheet and on the safety data sheet for this product and use personal protective equipment as directed
- Hypersensitive persons should wear protective clothing, gloves, and use protective cream on face, hands, and all exposed areas
Ventilation
- When used as a tank lining or in enclosed areas, thorough air circulation must be used during and after application until the coating is cured
- The ventilation system should be capable of preventing the solvent vapor concentration from reaching the lower explosion limit for the solvents used
- User should test and monitor exposure levels to ensure all personnel are below guidelines
- If not sure or if not able to monitor levels, use MSHA/NIOSH approved supplied air respirator
- Refer to the product and safety data sheet in the attachments section above for further details
Product Details
10614-992090
Data sheet
- Manufacturer
- Nullifire
- For Use On
- Steel, Aluminium
- Application Method
- Brush, Roller, Spray
- Sheen
- Gloss
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L
- Mixing Ratio
- 4:1 (A to B)
- Coverage
- 8,6 m² at 75 microns
- Recommended Thinner/Cleaner
- Carboline Thinner 2
- Max. Application Temperature
- Material: 38°C - Surface: 49°C - Ambient: 35°C - Humidity: 80%
- Min. Application Temperature
- Material: 10°C - Surface: 4°C - Ambient: 4°C - Humidity: 10%
- Solids by Volume
- 65% ± 2%
- VOC
- As supplied: 300 g/l
- Shelf Life (from date of manufacture)
- 24 months at 24°C
- Recommended Dry Film Thickness
- 75 microns per coat
- UN Number
- UN1263
- Dry to Recoat (at 10°C)
- 8 hours
- Fully Cured (at 10°C)
- 7 days
- Pot Life
- 4 Hours at 24ºC
- Base Type
- Polyurethane
- Suitable For Use On
- Aluminium
- Suitable For Use On
- Steel
- Suitable For Use On
- Galvanised Steel
- Suitable For Use On
- Previously Painted Surfaces
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Product Usage Type
- Topcoat
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Aluminium
- Colour Family
- Anthracite Grey
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Nullifire TS134 - Acrylic Polyurethane Top Seal (High Gloss) is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
