- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Specifically formulated for priming surfaces before applying Mapefloor I 500 W when used to form self-levelling, vapour-permeable epoxy coatings (Mapefloor System 53) and Mapefloor Urban System. Typical application examples:
- Primer for Mapefloor Urban System
- Primer for Mapefloor I 500 W (Mapefloor System 53)
- For professional use only
Mapefloor I 600 W is a two-component, transparent, epoxy resin-based primer.
Quick Links - Click To Jump To Section:
Features & Benefits
- Prepared as specified and diluted according to requirements, it may be applied by roller or by airless spray in coats from 60 to 100 µm thick
- May be applied directly on concrete without a vapour barrier
Recommendations & Limitations
- Do not dilute Mapecoat I 600 W with solvents
- Do not apply Mapecoat I 600 W on crumbling substrates
- Do not apply Mapecoat I 600 W on substrates with oil or grease stains or stains in general
- Only apply Mapecoat I 600 W on substrates prepared as specified
- Do not mix partial quantities of the components to avoid mixing errors; the product may not harden correctly
- Do not expose the mixed product to sources of heat
- Protect the product from water for at least 24 hours after application
- The temperature of the substrate must be at least 3°C above dew-point
- Do not apply Mapecoat I 600 W if the temperature is lower than 8°C or higher than 35°C
Application & Preparation
Please refer to the data sheets in the tab above for further information.
Data sheet
- Manufacturer
- Mapei
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior Use
- For Use On
- Floors
- Application Method
- Roller
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5.9KG kit (Comp A: 2.3KG, Comp B: 3.6KG)
- Coverage
- According to the absorption of the substrate: 0.15-0.25 kg/m²
- Max. Application Temperature
- 35°C
- Min. Application Temperature
- 8°C
- UN Number
- UN3082
- Base Type
- Water-Based
- Suitable For Use On
- Floors
- Application Method
- Roller
- Manufacturer
- Mapei
- Components
- 2K
- Product Usage Type
- Primer
- Product Range
- Mapecoat
- Workability Time
- 2-3 hours
- Hardening
- 3-4 hours (first coat)
6-8 hours (second coat) - Hardening
- Full hardening time: 7 days
- Colour Family
- Clear
- Product Type
- Epoxy
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Mapei Mapecoat I 600 W is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT