Can I use this on enclosed porch walls? Can I then paint over it with a satin emulsion and/or half tile over the application? Thank you

Assuming the walls are internal and previously painted, you can apply this product to the suitably prepared surface. This can be overpainted or papered over with a decorative finish of choice without affecting the performance. In terms of half tiling, there is no reason as to why this can't be applied, however a tiled surface will be naturally cold, therefore condensation may become attracted in the same way as a shower or bathroom.

I have mould on an inside bedroom bay wall ,this area has no insulation,so the cold air outside hits the warm air on The wall inside creating condensation. will this assist in stopping mould growth.

Prior to application we would recommend the areas are cleaned down with N-Virol Suretherm Goodbye Mould Cleaning Spray to remove any mould and surface grime. Then 2 coats of N-Virol Suretherm Goodbye Mould Thermal Anti Condensation Paint should be applied. This will aid in the reduction of condensation forming on the treated surfaces. C ondensation takes 57% longer to form on Suretherm coated surfaces compared to ordinary emulsion paint.

For use on bedroom external wall. I have already papered and painted the wall but need a coating over this to prevent heat loss. I don't want to remove the wallpaper. Do you have a coating/paint that can be placed directly on top of the wallpaper that will prevent the loss of heat Thank you

Yes this product would be suitable and it can be applied to a previously painted or wall papered wall. We would recommend testing for compatibility and adhesion on a small area prior to full application.

The data sheets says for use on plaster, steel and metal. Will this be suitable on walls with lining paper and emulsion?

Yes assuming the lining paper is clean, dry and sound it can be used.

Is this suitable for painting an internal ceiling in a small shower room that has problem mould and condensation ?

Yes this paint can be used in high humidity areas not subject to direct water contact. The substrate must be clean, dry, sound and prepared and detailed in the technical data sheet, which includes removal and treatment of any mould present with N-Virol Suretherm Goodbye Mould Cleaning Spray . Increasing air flow will also help to reduce condensation.

Is this suitable for painting on internal stone and brick walls? Some walls are already painted and others are bare stone.

Yes this can be painted onto internal bare stone or brick walls or over previously painted areas. We would recommend testing for compatibility and adhesion prior to full application.

I want to use this on the ceiling of a outdoor canopy. The area is open but the ceiling will not get any rain on it. The material is painted wood. Will this still work as a thermal barrier. Will it hold on wood? Thanks Geoff.

No, unfortunately this product is not suitable for this application. It can be used on wood and can be effective in preventing (for example) dripping from a ceiling in a storage container. But not recommended for an external application, as this is exposed to the outside air and temperature it would not have any thermal effect at all.

N-Virol Suretherm Thermal Anti Condensation Paint | Helps Prevent Mould & Fungal Growth

N-Virol Suretherm Goodbye Mould Thermal Anti Condensation Paint

Reference NVI001

Brand N-Virol

Search ID NV5968

Anti Condensation Paint ideal for use on cold walls and ceilings in your home or office which may be susceptible to condensation, mould and heat loss. Other uses include steel frame buildings, metal cladding, garage roofs, shipping containers and as part of an underfloor heating system.

For internal use only on walls and ceilings - Helps to prevent mould and fungal growth
Can be overpainted or papered over without affecting the performance (unlike anti-mould paints)
Can also be painted on cold surfaces - Handrails, metal handles and other cold to touch materials. Retains heat from your hand which makes the painted area feel 'warm'

Colour

White

Size

Finish

£23.93(incl. VAT)

£19.94(ex. VAT)

Quantity

Please choose your colour

Available for Delivery (See Delivery Options Below)

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

7 questions about the product

Description

N-Virol Suretherm Goodbye Mould Thermal Anti Condensation Paint has been specifically designed to reduce condensation from forming on treated surfaces. It forms a thermal barrier on cold walls. Its unique thermal properties make it perfect for use on cold walls and ceilings in your home or office which may be susceptible to condensation, mould and heat loss. Other uses include steel frame buildings, metal cladding, garage roofs, shipping containers and as part of an underfloor heating system.

Glass Microspheres within Suretherm paint helps to maintain surface temperatures on treated substrates. This increases the dew point compared to ordinary emulsion which reduces the chance of condensation from forming.

Independent tests confirm that surfaces treated with Suretherm paint take twice as long to cool down when compared to ordinary emulsion paint. Condensation takes 57% longer to form on Suretherm coated surfaces compared to ordinary emulsion paint.

Suretherm paint can also be painted on cold surfaces such as handrails, metal handles and other cold to touch materials. The paint retains the heat from your hand which makes the painted area feel 'warm'.

Quick Links - Click To Jump To Section:

Features & Benefits
How It Works
Application Notes

Features & Benefits

Specifically designed to reduce condensation from forming on treated surfaces
Perfect for use on cold walls and ceilings which may be susceptible to condensation, mould and heat loss
Forms a thermal barrier on cold walls - Glass Microspheres maintain surface temperatures on treated substrates
Other uses include steel frame buildings, metal cladding, garage roofs, shipping containers and as part of an underfloor heating system
Reduces condensation on treated surfaces - Condensation takes 57% longer to form on Suretherm coated surfaces compared to ordinary emulsion paint
Helps to prevent mould and fungal growth
For internal use only on walls and ceilings
Can be overpainted or papered over without affecting the performance (unlike anti-mould paints)
Can also be painted on cold surfaces - Handrails, metal handles and other cold to touch materials. Retains heat from your hand which makes the painted area feel 'warm'
Water/acrylic based emulsion

How It Works

Application Notes

Clean mould from surfaces if present with Suretherm Cleaning Spray allowing treated areas to dry completely
Use a medium pile roller (recommended) and apply 2 coats evenly taking care not to over apply as this may result in a thick, stippled finish
Coverage - Approximately 8m²/litre per coat (Overall 4m²/litre for the required two coats)
Occasionally a foam roller may give a smoother final finish. A brush can be used if preferred
If spray applying, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for the correct specification
Suretherm can be left as a finish however it is recommended to paint over with a suitable paint of personal choice
In bathrooms, changing rooms or areas expecting high levels of humidity, a wipeable/scrubbable paint is recommended to finish
Wallpaper can be applied over the top of Suretherm. If using lining paper, it is recommended to apply the lining paper on the surface first prior to painting with Suretherm
Available in White. We do not recommend adding coloured pigments or use of mechanical agitators as this could damage the glass microspheres within the paint

Product Details

Reference 5968-897920

Data sheet

Manufacturer: N-Virol
For Use By: Consumer Use
Interior / Exterior Use: Interior Use
For Use On: Plaster
Steel
Metal
Application Method: Roller
Brush
Spray
Single, Two or Three Pack: Single
Pack Size: 1L
2.5L
5L
10L
25L
Key Features: Anti-Condensation thermal paint
Coverage: Approx. 8m²/litre per coat (Overall 4m²/litre for the required two coats)
Recommended Thinner/Cleaner: Water
Max. Application Temperature: 25°C
Min. Application Temperature: 5°C
Shelf Life (from date of manufacture): 12 Months
Touch Dry: 1-3 hours per coat depending on temperature, humidity and airflow
Finish: Matt
Recommended Dry Film Thickness: 225 - 250 microns after 2 coats
UN Number: N/A
Colour(s): White
Base Type: Water-Based
Suitable For Use On: Cold Metal Walls
Suitable For Use On: Ceilings
Suitable For Use On: Metal Cladding
Suitable For Use On: Cold Steel Walls
Suitable For Use On: Plaster Walls
Suitable For Use On: Cold Plaster Ceilings
Suitable For Use On: Steel Walls
Suitable For Use On: Cold Metal Ceilings
Suitable For Use On: Plaster Ceilings
Suitable For Use On: Cold Steel Ceilings
Suitable For Use On: Metal Ceilings
Suitable For Use On: Handrails
Suitable For Use On: Steel Ceilings
Suitable For Use On: Metal Handles
Suitable For Use On: Domestic Walls
Suitable For Use On: Cold Handrails
Suitable For Use On: Office Walls
Suitable For Use On: Cold Metal Handles
Suitable For Use On: Rental Properties
Suitable For Use On: Cold Office Walls
Suitable For Use On: Cold Walls
Suitable For Use On: Office Ceilings
Suitable For Use On: Cold Ceilings
Suitable For Use On: Cold Office Ceilings
Suitable For Use On: Metal
Suitable For Use On: Steel Frame Buildings
Suitable For Use On: Domestic Ceilings
Suitable For Use On: Plaster
Suitable For Use On: Garage Roofs
Suitable For Use On: Cold Domestic Walls
Suitable For Use On: Steel
Suitable For Use On: Shipping Containers
Suitable For Use On: Cold Domestic Ceilings
Suitable For Use On: Walls
Suitable For Use On: Cold Plaster Walls
Suitable For Use On: Metal Walls
Finish: Matt
Application Method: Brush
Application Method: Roller
Application Method: Spray
Product Usage Type: Anti-Condensation
Product Range: Suretherm
Colour Family: White
Categorised As: Anti-Condensation Paints
Categorised As: Anti-Mould Paints
Product Focus: Mould & Damp Proof Paints
Seasonal: Cold Weather

Attachments

Download

Product Data Sheet

Download

Safety Data Sheet

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Saley on 2024-01-20 18:32:45	Question: Can I use this on enclosed porch walls? Can I then paint over it with a satin emulsion and/or half tile over the application? Thank you
	Answer from Rawlins’ Technical Team: Assuming the walls are internal and previously painted, you can apply this product to the suitably prepared surface. This can be overpainted or papered over with a decorative finish of choice without affecting the performance. In terms of half tiling, there is no reason as to why this can't be applied, however a tiled surface will be naturally cold, therefore condensation may become attracted in the same way as a shower or bathroom.

mark scotcher on 2023-05-12 08:47:01	Question: I have mould on an inside bedroom bay wall ,this area has no insulation,so the cold air outside hits the warm air on The wall inside creating condensation. will this assist in stopping mould growth.
	Answer from Rawlins’ Technical Team: Prior to application we would recommend the areas are cleaned down with N-Virol Suretherm Goodbye Mould Cleaning Spray to remove any mould and surface grime. Then 2 coats of N-Virol Suretherm Goodbye Mould Thermal Anti Condensation Paint should be applied. This will aid in the reduction of condensation forming on the treated surfaces. Condensation takes 57% longer to form on Suretherm coated surfaces compared to ordinary emulsion paint.

Eleanor Aitken on 2022-11-18 16:06:53	Question: For use on bedroom external wall. I have already papered and painted the wall but need a coating over this to prevent heat loss. I don't want to remove the wallpaper. Do you have a coating/paint that can be placed directly on top of the wallpaper that will prevent the loss of heat Thank you
	Answer from Rawlins’ Technical Team: Yes this product would be suitable and it can be applied to a previously painted or wall papered wall. We would recommend testing for compatibility and adhesion on a small area prior to full application.

Gary on 2022-11-01 20:17:30	Question: The data sheets says for use on plaster, steel and metal. Will this be suitable on walls with lining paper and emulsion?
	Answer from Rawlins’ Technical Team: Yes assuming the lining paper is clean, dry and sound it can be used.

James on 2022-08-23 07:26:20	Question: Is this suitable for painting an internal ceiling in a small shower room that has problem mould and condensation ?
	Answer from Rawlins’ Technical Team: Yes this paint can be used in high humidity areas not subject to direct water contact. The substrate must be clean, dry, sound and prepared and detailed in the technical data sheet, which includes removal and treatment of any mould present with N-Virol Suretherm Goodbye Mould Cleaning Spray. Increasing air flow will also help to reduce condensation.

Emma on 2022-05-16 17:28:42	Question: Is this suitable for painting on internal stone and brick walls? Some walls are already painted and others are bare stone.
	Answer from Rawlins’ Technical Team: Yes this can be painted onto internal bare stone or brick walls or over previously painted areas. We would recommend testing for compatibility and adhesion prior to full application.

Geoff on 2022-01-08 22:08:00	Question: I want to use this on the ceiling of a outdoor canopy. The area is open but the ceiling will not get any rain on it. The material is painted wood. Will this still work as a thermal barrier. Will it hold on wood? Thanks Geoff.
	Answer from Rawlins’ Technical Team: No, unfortunately this product is not suitable for this application. It can be used on wood and can be effective in preventing (for example) dripping from a ceiling in a storage container. But not recommended for an external application, as this is exposed to the outside air and temperature it would not have any thermal effect at all.

IMPORTANT SHIPPING & DELIVERY INFORMATION

N-Virol Suretherm Goodbye Mould Thermal Anti Condensation Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

N-Virol Suretherm Goodbye Mould Cleaning Spray

Designed to remove surface grime and stains caused by condensation and black mould. It does not contain any harmful biocides and is formulated using natural ingredients. This product should be used prior to the application of N-Virol Suretherm Anti Condensation Paint. Cleans walls, ceilings and hard surfaces. Easy application. Gets to the...

£9.00 (incl. VAT)

Shop now

In Stock and Available for Delivery

COVERAGE CALCULATOR
Units
Total area²
Or enter length and width dimensions:
Length
Width

Follow us on:

N-Virol Suretherm Goodbye Mould Thermal Anti Condensation Paint

N-Virol Suretherm Goodbye Mould Thermal Anti Condensation Paint

Quick Links - Click To Jump To Section:

Features & Benefits

How It Works

Application Notes

Data sheet

Product Data Sheet

Safety Data Sheet

Questions

Question about the product

IMPORTANT SHIPPING & DELIVERY INFORMATION

N-Virol Suretherm Goodbye Mould Cleaning Spray