- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Hempadur 35560 is a solvent free, high-build, polyamine adduct cured epoxy paint, which cures to a coating with good resistance to fresh water.
- Recommended as a lining in potable water tanks and pipelines and as a self-primed, high-build coating primarily for areas subject to abrasion and/or to a highly corrosive environment; e.g. splash zones, jetty and bridge pilings and decks.
- Certified by NSF International to NSF/ANSI standard 61- Drinking Water System Components - Health Effects and more certifications listed below
For professional use only
Colour swatch is a representation and not indicative of the final colour
Description
Hempadur 35560 is a solvent free, high-build, polyamine adduct cured epoxy paint, which cures to a coating with good resistance to fresh water.
Quick Links - Click To Jump To Section:
Features & Benefits
- For professional use only
- For new build, maintenance and repair
- Recommended as a lining in potable water tanks and pipelines and as a self-primed, high-build coating primarily for areas subject to abrasion and/or to a highly corrosive environment; e.g. splash zones, jetty and bridge pilings and decks.
- Excellent anticorrosive properties
- Solvent free
- Benzyl alcohol free
- Apply with brush, roller or airless spray. Nozzle pressure: 220 bar [3200 psi] Nozzle orifice: 0.019-0.025"
- This product should not be thinned
- Recommended tool cleaner: Hempel Tool Cleaner 99610
If brush or roller application is used, more coats will be necessary to achieve the specified dry film thickness. Spray data are indicative and subject to adjustment. Pressure is for a material temperature of 20°C.
Overthickness should be closely controlled and never locally exceed 600 micron DFT. On irregular surfaces it is recommended to employ special care in avoiding over application. For best performance, avoid excessive film thickness. Product may be specified in another film thickness than indicated depending on purpose and area of use. This will alter spreading rate, drying and curing time and overcoating interval.
Epoxy coats have an inherent tendency of chalking in outdoor exposure. This does not affect the performance of the coating
Product Certifications
- Certified by NSF International to NSF/ANSI standard 61- Drinking Water System Components - Health Effects. Please consult here, Certified Products & Systems for detailed information
- Approved by WRAS for contact with potable water
- Meets requirements to NORSOK M-501 when used as part of a predefined paint system. Edition 6, System 7A, 7B
- Complies with US FDA and EU food regulations for contact with liquid and dry foodstuff
Drying & Overcoating
Hempel’s specification supersedes any guidelines indicated in the overcoating table. Overcoating times are indicative for products of the same generic chemistry.
- Touch dry in 12 hours @ 10°C, 7 hours @ 20°C, 4½ hours @ 30°C, 4 hours @ 40°C
- Surface dry in 34 hours @ 10°C, 12 hours @ 20°C, 7 hours @ 30°C, 4½ hours @ 40°C
- Hard dry in 40 hours @ 10°C, 16 hours @ 20°C, 9 hours @ 30°C, 6 hours @ 40°C
- Fully cured in 14 days @ 10°C, 7 days @ 20°C, 9 days @ 30°C, 3 days @ 40°C
Immersion
Hempadur 35560
- 40 hours - 75 days @ 10°C
- 16 hours - 30 days @ 20°C
- 8 hours - 15 days @ 30°C
- 5 hours - 9 days @ 40°C
Product Details
6069-904101
Data sheet
- Manufacturer
- Hempel
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- Steel
- Application Method
- Brush/roller, airless spray
- Sheen
- Gloss
- VOC Levels
- 0 g/L
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 19.4L
- Mixing Ratio
- Base 35569 : Curing agent 98560 (6.8 : 2 by volume)
- Application
- Brush, Roller, Spray
- Touch Dry (at 20°C)
- 7 hours
- Dry to Recoat (at 20°C)
- 16 hours
- Fully Cured (at 20°C)
- 7 days
- Pot Life (at 20°C)
- 1½ hours
- Coverage
- 2.5 m²/L-5 m²/L (5 m²/L recommended)
- Recommended Thinner/Cleaner
- No thinning, Hempel's Tool Cleaner 99610
- Min. Application Temperature
- 15°C
- Solids by Volume
- 100%
- Heat Resistance (up-to)
- Service temperature maximum, dry exposure only: 140°C, maximum, fresh water (directly on steel, no temperature gradient): 45°C
- Shelf Life (from date of manufacture)
- 36 months (base) 12 months (curing agent)
- Recommended Dry Film Thickness
- 200-400 microns (200 recommended)
- Recommended Wet Film Thickness
- 200-400 microns (200 recommended)
- Specific Gravity
- 1.4 kg/L
- Hard Dry
- 16 hours
- Flashpoint
- 143°C
- Colour(s)
- Red, Cream
- Base Type
- Solvent Free
- Suitable For Use On
- Steel
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Product Usage Type
- Tank Lining
- Product Range
- Hempadur
- Colour Family
- Cream
- Colour Family
- Red
- For Tanks or Pipes
- Tank & Pipe
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Hempel Hempadur 35560 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£25.93
(incl. VAT)
In Stock and Available for Delivery
Hempel Tool Cleaner 99610
Hempel Tool Cleaner 99610 is a blend of strong solvents for cleaning of tools that have been used for mixing or application of two-component epoxy products. Better cleaning properties than epoxy thinners, and does not contain chlorinated solvent For cleaning of brushes, paint rollers, spray equipment, and other tools which have been used...
Price
£34.61
(incl. VAT)
In Stock and Available for Delivery