Follow us on:

PPG PSX 700 A Clear Coat | Metal Paint
PPG PSX 700 A Clear Coat | Metal Paint

PPG PSX 700 A Clear Coat

7549
PPG3923

PPG PSX 700 A Clear Coat is a two-component, engineered polysiloxane clearcoat compatible with primed steel, clean metals and concrete, offering high durability in challenging environments.

  • Resists dirt pick-up
  • Resists graffiti
  • High solids, low VOC
  • Isocyanate free
Colour
Size
Finish
£248.70(incl. VAT)
£207.25(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

PPG PSX 700 A Clear Coat is a two-component, engineered polysiloxane clearcoat compatible with primed steel, clean metals and concrete, offering high durability in challenging environments.

Top Features & Benefits


  • Resists dirt pickup, easily cleaned
  • Resists graffiti
  • High solids, low VOC
  • Isocyanate free
  • Gloss finish
  • No induction time



Product Data


Basic data at 20°C (68°F)

Data for Mixed Product
Number of components Two
Mass density 1.1 kg/l (9.2 lb/US gal)
Volume solids 78 ± 2%
VOC (supplied) Directive 1999/13/EC, SED: max. 200.0 g/kg max. 222.0 g/l (approx. 1.9 lb/gal) (aluminum)
Recommended dry film thickness 20 - 25 µm (0.8 - 1.0 mils) per coat
Theoretical spreading rate 39.0 m²/l for 20 µm (1564 ft²/US gal for 0.8 mils).
31.2 m²/l for 25 µm (1251 ft²/US gal for 1.0 mils)
Dry to handle 5 hours
Overcoating interval 4 hours. Maximum: 30 days
Full cure after 7 days
Shelf life Base: at least 12 months when stored cool and dry. Hardener: at least 12 months when stored cool and dry.

Notes:
See Additional Data: Overcoating intervals and Curing time.

Recommended Substrate Conditions and Temperatures

Substrate Condition

  • Existing sound coating systems; sufficiently roughened, dry and cleaned
  • Surface must be dry and free from any contamination

Concrete

  • Dried for at least 28 days in good ventilation conditions
  • Moisture content should not exceed 4.5%
  • Concrete must be sound, dry, free from laitance and any contamination
  • Rough surface; eventually abraded by power tool or diamond abrading tool

Non-ferrous Metals and Stainless Steel

  • Surface must be free from grease, salts and any contamination
  • Surface should be sufficiently roughened (e.g. sandpapering, sweep blasting)

Substrate Temperature and Application Conditions

  • Surface temperature during application should be between 5°C (41°F) and 50°C (122°F)
  • Substrate temperature during application and curing should be at least 3°C (5°F) above dew point
  • Ambient temperature during application and curing should be between 5°C (41°F) and 50°C (122°F)
  • Relative humidity during application and curing should be between 50% and 85%

Instructions for Use

  • One or two coats of 20 - 25 µm (0.8 - 1.0 mils)
  • Mixing ratio by volume: base to hardener 83:17 (5:1)
  • The temperature of the mixed base and hardener should be above 10°C (50°F), otherwise extra thinner may be required to obtain application viscosity
  • The paint should be stirred well before use, preferably by means of a mechanical mixer, to ensure homogeneity
  • Add hardener to base and continue stirring until homogeneous
  • If required, thinner should be added after mixing the components
  • Adding too much thinner results in reduced sag resistance and slower cure

Air spray

Recommended thinner: THINNER 60-12
Volume of thinner: 0 - 10%, depending on required thickness and application conditions
Nozzle orifice: 1.0 - 1.5 mm (approx. 0.040 - 0.060 in)
Nozzle pressure: 0.3 - 0.4 MPa (approx. 3 - 4 bar; 44 - 58 p.s.i.)

Airless spray

Recommended thinner: THINNER 60-12
Volume of thinner: 0 - 10%, depending on required thickness and application conditions
Nozzle orifice: Approx. 0.38 – 0.43 mm (0.015 – 0.017 in)
Nozzle pressure: 15.0 - 18.0 MPa (approx. 150 - 180 bar; 2176 - 2611 p.s.i.)

Brush/roller

Recommended thinner: THINNER 60-12
Volume of thinner: 0 – 5%

Cleaning solvent

THINNER 90-58

Overcoating interval for DFT up to 25 µm (1.0 mils)
Overcoating with... Interval 5°C (41°F) 10°C (50°F) 20°C (68°F) 30°C (86°F)
Itself Minimum
Maximum
12 hours
30 days
8 hours
30 days
4 hours
30 days
2 hours
30 days

Curing time for DFT up to 25 µm (1.0 mils)
Substrate Temp. Dry to Handle Full Cure
5°C (41°F) 16 hours 16 days
10°C (50°F) 9 hours 10 days
20°C (68°F) 5 hours 7 days
30°C (86°F) 3 hours 5 days

Pot life
10°C (50°F) = 6 hours
20°C (68°F) = 4 hours
30°C (86°F) = 3 hours
40°C (104°F) = 2 hours

Safety Precautions

  • This is a solvent-borne paint and care should be taken to avoid inhalation of spray mist or vapor, as well as contact between the wet paint and exposed skin or eyes.
  • Since improper use and handling can be hazardous to health and cause of fire or explosion, safety precautions included with Product Data/Application Instruction and Material Safety Data Sheet must be observed during all storage, handling, use and drying periods.

Worldwide Availability

It is always the aim of PPG Protective and Marine Coatings to supply the same product on a worldwide basis. However, slight modification of the product is sometimes necessary to comply with local or national rules/circumstances. Under these circumstances an alternative product data sheet is used.

Product Details
3923-499790

Data sheet

Manufacturer
PPG
Water / Solvent Based
Solvent
For Use On
Steel, Metal, Concrete
Application Method
Brush, Roller, Spray
Sheen
Gloss
Colour
Clear
Single, Two or Three Pack
Two-Pack
Pack Size
4.5L
Parts
Two
Base Type
Solvent Based
Solvent
Polysiloxane
Mixing Ratio
5:1
Suitable Substrates
Primed steel, clean metals, concrete
Key Features
Resists dirt pickup, easily cleaned, resists graffiti, high solids, low VOC
Application
Brush, Roller, Spray
Touch Dry (at 20°C)
-
Dry to Handle (at 20°C)
5 hours
Dry to Recoat (at 20°C)
4 hours
Fully Cured (at 20°C)
7 days
Pot Life (at 20°C)
4 hours
Coverage
7.2 m²/l for 125 µm (289 ft²/US gal for 5.0 mils)
Recommended Thinner/Cleaner
PPG Thinner 60-12, PPG Thinner 90-58
Unit Contents
-
Compatible Primers
-
Compatible Topcoats
Itself
Max. Application Temperature
50°C (122°F)
Min. Application Temperature
5°C (41°F)
Density
1.4 kg/l (11.3 lb/US gal)
Solids by Volume
90 ± 2%
Heat Resistance (up-to)
120°C (250°F)
VOC
Directive 1999/13/EC, SED: max. 200.0 g/kg max. 222.0 g/l (approx. 1.9 lb/gal) (aluminum)
Shelf Life (Once Opened)
Base: at least 36 months when stored cool and dry. Hardener: at least 24 months when stored cool and dry
UN Number (Activator)
UN3470
UN Number (Base)
UN3082
Base Type
Solvent
Suitable For Use On
Metal
Suitable For Use On
Concrete
Suitable For Use On
Steel
Finish
Gloss
Application Method
Roller
Application Method
Spray
Application Method
Brush
Product Usage Type
Topcoat
Product Range
PSX
Colour Family
Clear
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

PPG PSX 700 A Clear Coat is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


You might also like
PPG Thinner 60-12

PPG Thinner 60-12

We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products. More Information Delivery Info

Shop now
Trustpilot
In stock
Hand & Power Tool Surface Preparation Kits for Steel

Surface Preparation Kits for Steel

These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...

Price £25.93 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery