- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Hempathane Topcoat 55210 is a glossy polyurethane topcoat that is cured with aliphatic isocyanate and delivers good gloss and colour retention.
- Recommended as a finishing coat for protection of structural steel in severely corrosive atmospheric environment, where colour fastness and gloss retention are required
- Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j, and more certifications below
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Hempathane Topcoat 55210 is a glossy polyurethane topcoat that is cured with aliphatic isocyanate and delivers good gloss and colour retention. Hempathane Topcoat 55210 is recommended as a finishing coat for protection of structural steel in severely corrosive atmospheric environment, where colour fastness and gloss retention are required.
Quick Links - Click To Jump To Section:
Features & Benefits
- For new build, maintenance and repair
- Finishing coat for protection of structural steel
- For severely corrosive atmospheric environment
- Glossy with good gloss and colour retention
- Minimum temperature for curing is -10°C
- Apply with brush/roller, air spray or airless spray. Nozzle pressure: 150 bar [2200 psi] Nozzle orifice: 0.017-0.019"
Note: If brush or roller application is used, more coats will be necessary to achieve the specified dry film thickness. Spray data are indicative and subject to adjustment. Pressure is for a material temperature of 20°C.
Product may be specified in another film thickness than indicated depending on purpose and area of use. This will alter spreading rate, drying and curing time and overcoating interval. For best performance, avoid excessive film thickness.
Product Certifications
- Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j
- EC-type examined as a low flame spread material when used as part of a predefined paint system
- Complies with the European Fire Standard EN 13501-1, fire reaction class: B-s1, d0.
Overcoating
Hempel’s specification supersedes any guidelines indicated in the overcoating table. Overcoating times are indicative for products of the same generic chemistry.
Previous coat: According to Hempel’s Specification. Recommended products are:
- Hempaprime Multi 500 45950/3
- Hempadur Quattro series
- Hempadur Avantguard series
Atmospheric medium
Hempathane Topcoat 55210
-
- 30 hours - Ext @ -10°C
- 18 hours - Ext @ 0°C
- 6 hours - Ext @ 20°C
- 100 minutes - Ext @ 40°C
Product Details
7016-902831
Data sheet
- VOC Levels
- 446 g/L
- Single, Two or Three Pack
- Two-Pack
- Mixing Ratio
- Base 55219 : Curing agent 95370 (7 : 1 by volume)
- Application
- Brush, Roller, Spray
- Touch Dry (at 20°C)
- 45 mins
- Coverage
- 6.4 m²/L-13 m²/L (10 m²/L recommended)
- Recommended Thinner/Cleaner
- Hempel's Thinner 08080 Hempel's Thinner 08510
- Solids by Volume
- 51 ± 2%
- Heat Resistance (up-to)
- Maximum, dry exposure only: 120°C
- Touch Dry
- 2½ hours @ -10°C, 1 hours 40 minutes @ 0°C, 2½ hours @ 20°C, 20 minutes @ 40°C
- Recommended Dry Film Thickness
- 40-80 microns (50 recommended)
- Recommended Wet Film Thickness
- 80-150 microns (100 recommended)
- UN Number
- UN1263
- Pot Life
- 6 hours @ 10°C, 4 hours @ 20°C, 2½ hours @ 30°C
- Specific Gravity
- 1.2 kg/L
- Hard Dry
- 21 hours @ -10°C, 12 @ 0°C, 4½ hours @ 20°C, 1½ hours @ 40°C
- Flashpoint
- 33°C
- Base Type
- Solvent-Based
- Suitable For Use On
- Primed Surfaces
- Finish
- Gloss
- Usages
- Severely Corrosive Environments
- Usages
- Atmospheric
- Usages
- Gloss Retention
- Usages
- Colour Retention
- Product Usage Type
- Topcoat
- Product Range
- Hempathane
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Violet
- Colour Family
- Anthracite Grey
- Colour Family
- Cream
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Off-White
- Product Type
- Polyurethane
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 45 mins
- Product Attributes
- Gloss Retention
- Product Attributes
- Colour Retention
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Hempel Hempathane Topcoat 55210 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
