- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Matt, 2-pack Polyurethane finish in 6,700+ colours for coating of machinery, agricultural and construction equipment, and many other industrial painting applications where a durable matt finish is required.
- Compatible with Selemix Epoxy & PU primers, giving a durable, hard wearing paint system
- For High-Gloss, Semi-Gloss and Semi-Matt finishes please see 7-512 2k Polyurethane Extra Topcoat
- For solid colours and single-layer metallic finishes
- Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours
- *Note: RAL Pearl colours shown are approximations only - matches will not be exact
- Product can be purchased as a Two Component Pack, or as Base or Hardener only
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Product customisation
Don't forget to save your customization to be able to add to cartProfessional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Selemix 7-511 2K Polyurethane Matt Topcoat is a Matt, 2-pack Polyurethane finish for solid colours and single-layer metallic finishes.
It can be combined with 7-512 Gloss Binder to give semi-gloss and semi-matt finishes - these finishes are available pre-blended, please see 7-512 2k Polyurethane Extra Topcoat for the available options.
Suitable for the coating of machinery, agricultural and construction equipment, and many other industrial painting applications where a durable matt finish is required.
Application can be by conventional spray or air assisted airless spray.
For Professional Use Only.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Surface Preparation
- Mixing
- Application Notes
- Theoretical Coverage
- Drying Times
- Health & Safety
Features & Benefits
- Matt, 2-pack Polyurethane finish for solid colours and single-layer metallic finishes
- For High-Gloss, Semi-Gloss and Semi-Matt finishes please see 7-512 2k Polyurethane Extra Topcoat
- Compatible with Selemix Epoxy & PU primers, giving a durable, hard wearing paint system
- Suitable for the coating of machinery, agricultural and construction equipment, and many other industrial painting applications where a durable matt finish is required
- Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours
- *Note: RAL Pearl colours shown are approximations only - matches will not be exact
- Product can be purchased as a Two Component Pack, or as Base or Hardener only
- For Professional Use Only
Surface Preparation
Apply only on a clean and dry surface with a temperature above the dew point to avoid condensation. In confined spaces, provide adequate ventilation during application and drying.
Painted Surfaces/Polyurethane or Polyester Fillers:
- Machine sand with P320-400 discs and degrease
Selemix Epoxy Primers or PU Primers:
- Refer to Primer TDS for recoat time
Mixing
- Note: For Semi-Matt, Semi-Gloss and High Gloss finishes, please refer to 7-512 2k Polyurethane Extra Topcoat
- Thoroughly mix paint before activating and check colour before use
Features | Conventional Spray | Air-Assisted Airless |
---|---|---|
By Weight: 7-511 Topcoat 9-060 |
By Weight: 1000 150 350-400 |
By Weight: 1000 150 350-400 |
By Volume: 7-511 Topcoat 9-060 Hardener |
By Volume: 6 1 2.5-3 (40-50%) |
By Volume: 6 1 2.5-3 (40-50%) |
Viscosity (at 20°C): | 18-20 secs DIN4 | 18-20 secs DIN4 |
Pot Life (at 20°C): | 1.5 hours | 1.5 hours |
Mixing Ratio:
- Selemix 7-511 2K Polyurethane Matt Topcoat
- 6 parts base : 1 part hardener
Please Note: Refer to the Product Data Sheet for detailed information regarding mixing ratios for the relevant binder/base and hardener/activator used.
Application Notes
Features | Conventional Spray | Airless Spray |
---|---|---|
Spraygun Setup: |
Nozzle: Gravity: 1.3-1.4mm Suction: 1.6-1.8mm Pressure feed: 0.85-1.2mm |
Nozzle: 9-11 thou 0.23-0.28mm |
Air Pressure: |
HVLP: 2 Bar Standard: 2-3 Bar |
2.5 Bar |
Fluid Pressure: | N/A | 80-100 Bar |
Number of coats: | 2 | 2 |
Flash-off between coats: | 10-15 mins | 10-15 mins |
Drying: | Air dry or bake at 60°C for 30-40 mins | Air dry or bake at 60°C for 30-40 mins |
Flash-off before bake: | 10 mins | 10 mins |
Wet Film Thickness: | 120 microns | 120 microns |
Dry Film Thickness: | 50 microns | 50 microns |
Please see the Product Data Sheet for detailed Application Instructions before use.
Theoretical Coverage
- 6-6.4m²/L at 50 microns DFT
Note: Please see the Product Data Sheet for detailed information.
Drying Times
Drying Times 20°C | |
---|---|
Dust Free | 15-20 mins |
Touch Free | 1-2 hours |
Tape Free | 16 hours |
Handleable | 4-5 hours |
Hard Dry | 12-18 hours or after bake |
Overcoating time |
Minimum: 14 Hours Maximum: 24 hours by itself without sanding |
Please Note: Lower temperature or film thickness higher than 50µm will extend drying times |
Health & Safety
- For comprehensive Health, Safety and Environmental advice, please refer to the relevant Material Safety Data Sheets and product can labels
- THIS PRODUCT IS FOR PROFESSIONAL USE ONLY
Data sheet
- Manufacturer
- Selemix
- For Use By
- Professional Use
- Water / Solvent Based
- Solvent Based
- For Use On
- Painted Surfaces
Primed Surfaces - Sheen
- Matt
- Single, Two or Three Pack
- Two-Pack
- Mixing Ratio
- 6 to 1
- Application
- Spray
Airless Spray - Touch Dry (at 20°C)
- 2 hours
- Pot Life (at 20°C)
- 1.5 hours
- Recommended Dry Film Thickness
- 50 microns
- Recommended Wet Film Thickness
- 120 microns
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN1263
- Hard Dry
- 10-18 hours or after bake
- Dust Dry (at 20°C)
- 15-20 minutes
- Colour(s)
- Fully Tintable
- Base Type
- Solvent-Based
- Suitable For Use On
- Primed Surfaces
- Finish
- Matt
- Substrate
- Painted / Primed Metal
- Usages
- Atmospheric
- Usages
- Force Dry Compatible
- Usages
- Tough/Durable
- Product Usage Type
- Topcoat
- Technologies
- Solventborne
- Technologies
- 2K
- Application Methods
- Conventional
- Application Methods
- Electrostatic
- Application Methods
- Airmix
- Product Type
- Alkyd
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 2 hours
- Drying Properties
- Force Dry Compatible
- Product Attributes
- Tough / Durable
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Selemix 7-511 2K Polyurethane Matt Topcoat is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Selemix 1-470 Slow Direct Thinner
For use with selected products in the Selemix range including Selemix 2K Polyurethane Direct Topcoat. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only
Selemix 1-208 Slow Thinner
For use with selected products in the Selemix range including Selemix 2K Polyurethane Direct Topcoat. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only
Selemix 1-420 Polyurethane Thinner
For use with selected products in the Selemix range including Selemix 2K Polyurethane Direct Primer. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only
Selemix 7-512 2K Polyurethane Extra Topcoat
High quality, fast-drying, 2-pack Polyurethane topcoat in 3 finishes and 6,700+ colours, for coating machinery, agricultural and construction equipment, and many other industrial painting applications where a durable finish is required. Available in three gloss levels (see drop-down menu below): High Gloss (7-512), Semi-Gloss* and...