- Temporarily Out-of-Stock
- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
This product is temporarily unavailable; in the meantime, our technical team recommend Zinsser Allclean Scrubbable Interior Matt as a great alternative.
Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.
Britannia Heavy Duty Matt Emulsion, a professional quality, smooth matt emulsion providing a durable and wipeable finish for interior walls and ceilings.
- Excellent opacity
- Water-based
- One coat
- Suitable for wall and ceiling surfaces in most normal interior situations. Ideal for use in schools, hotels, restaurants, canteens and bakeries where its low odour qualities combined with speed of drying enables work to be completed with minimum disruption.
- For interior use only
- Not suitable for areas subjected to heavy condensation.
Britannia Heavy Duty Matt Emulsion is a professional quality, smooth matt emulsion providing a durable and wipeable finish for interior walls and ceilings.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Spreading Rate
- Drying Time
- Shelf Life
- Preparation
- Application
- Spray & Thinning Application
- Cleaning
Features & Benefits
- Smooth matt emulsion
- Durable and wipeable finish
- Excellent opacity
- Water-based
- One coat
- Can be Brush, Roller or Spray applied.
- Suitable for wall and ceiling surfaces in most normal interior situations. Ideal for use in schools, hotels, restaurants, canteens and bakeries where its low odour qualities combined with speed of drying enables work to be completed with minimum disruption.
- For interior use only
- Not suitable for areas subjected to heavy condensation.
- Do not apply when the air or substrate temperatures are likely to fall below 8°C or when the relative humidity is above 80% during application or the drying period.
Spreading Rate
Up to 15 square metres/litre per coat depending on the nature and porosity of the surface. Strong or contrasting colours may require additional coats. When using more than one tin of colour in the same room, intermix before use.
Drying Time
- Touch dry in 1-2 hours.
- Recoatable after 2-4 hours.
Shelf Life
Up to 12 months if stored correctly in an unopened container.
Preparation
All surfaces must be painted should be clean, dry and free from loose and flaking material. Prime bare surfaces with the appropriate Britannia Primer.
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Special precautions should be taken during surface preparation of pre-1960’s paint surfaces over wood and metal as they may contain harmful lead. For further information contact our Technical team on 0113 2455450 (option 2) or send a message to [email protected].
Application
Stir well before use.
Easy to apply by brush or roller. Also suitable for application by spray (see below). If more than one can of colour is to be used in the same area, intermix before use. Ensure good ventilation during application and drying. Do not apply in temperatures below 10˚C or in damp conditions.
Spray & Thinning Application
Airless spray:
- Un-thinned: Spray @ 3000 PSI / 207 bar with 527 tip.
- Thinned: 1 part clean water to 10 parts paint spray @2500 PSI /172 bar with 527 tip.
Cleaning
Remove as much product as possible from application equipment before cleaning. Replace lid firmly. Clean equipment immediately after use with warm soapy water and rinse thoroughly. Some local authorities have special facilities for the disposal of waste coatings. Do not empty product into drains or watercourses.
Data sheet
- Manufacturer
- Britannia
- Interior / Exterior Use
- Interior Use
- Water / Solvent Based
- Water
- Application Method
- Brush, Roller, Spray
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Base Type
- Water-Based
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Product Usage Type
- Topcoat
- Colour Family
- Magnolia
- Colour Family
- White
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Britannia Heavy Duty Matt Emulsion is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT