Is it possible to wallpaper over anti-condensation paint without losing its benefits.

This product is designed for application to ceilings or upper parts of walls where steam or water vapour formation occurs, to prevent condensation and dripping but not designed for overpainting. Assuming the surface is clean, dry, sound, any areas of mould or surface grime treated with N-Virol Suretherm Goodbye Mould Cleaning Spray to remove this build up, you can apply 2 coats of N-Virol Suretherm Goodbye Mould Anti Condensation Paint . This product will aid the reduction of condensation forming on the treated surfaces but also allow overpainting or wallpapering over without reducing or affecting the performance.

Is this product suitable for application to the underside of a corrugated iron shed roof?

Yes, assuming the surface is bare metal, after preparation (see product data sheet) apply Rust-Oleum Mathys Metal Cladding Primer followed by Rust-Oleum 5090 Anti-Condensation Coating. Please note that Rust-Oleum 5090 Anti-Condensation Coating works in an environment where there is short term high humidity followed by longer periods when humidity can escape e.g. bathrooms. It cannot work where the humidity builds up and cannot then escape. So if this shed was closed and humidity built up a as a result of sunshine, you would still get condensation forming and then dripping down from ceiling.

Rust-Oleum 5090 Anti-Condensation Wall Paint | Hygienic Topcoat

Rust-Oleum 5090 Anti-Condensation Coating

Reference 5090.5

Brand Rust-Oleum

Search ID RUS1302

Available in White.
Water-based hygienic topcoat.
Protects against condensation.
For use in breweries, kitchens, wash and shower rooms.
Fast drying.
Can be applied on slightly damp surfaces.
Professional use only.

Colour

White

Size

Finish

£126.13(incl. VAT)

£105.11(ex. VAT)

Quantity

Please choose your colour

In Stock and Available for Delivery (See Delivery Options Below)

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

2 questions about the product

Description

Rust-Oleum 5090 Anti-Condensation Coating - White Hygienic Topcoat

The 5090 Anti-Condensation Coating is a single pack, water-based hygienic topcoat designed to prevent condensation and dripping in environments prone to discontinuous steam or water vapour formation. Ideal for use on ceilings and the upper parts of walls in breweries, kitchens, washrooms, and shower rooms, this coating offers a reliable solution for maintaining dry surfaces.

Application and Usage

This coating can be applied using airless spray, brush, or roller. For airless spray application, it is recommended to use pneumatic and electric airless equipment with a tip size of 0.018-0.024 inch and a fluid pressure of 130-200 bar. The product can also be applied by brush or roller, resulting in a textured finish when using 2-3 coats. It adheres well to slightly damp surfaces and should be used in environments where humidity and condensation are issues.

Features and Benefits

Prevents condensation and dripping from ceilings and walls.
Fast drying, touch dry in 1 hour at 20°C.
High water absorption capacity – 1 litre of the product absorbs at least 400 grams of water after drying.
Can be applied on slightly damp surfaces.
CE Marked and compliant with European standards.
Suitable for professional and industrial use.

Recommended Surfaces

The 5090 Anti-Condensation Coating is ideal for use on concrete, brick, and previously coated surfaces. New concrete or brick surfaces should cure and dry for at least 30 days prior to application. It is important to remove grease, oil, and other surface contaminants by alkaline or high-pressure (steam) cleaning before application. Ensure previous coatings are humidity resistant and sand them to remove gloss and roughen the surface slightly.

Restrictions and Limitations

This product should not be applied in temperatures below 5°C or above 35°C, and the relative humidity should be below 85%. Avoid using air-atomised spray methods. Maximum dry film thickness per coat is 500 µm dry, which equals 1850 µm wet. Clean the surface only when completely dry, using cold water and liquid detergent with low pressure.

Health and Safety

UN Number: N/A
The 5090 Anti-Condensation Coating contains hydrocarbons, C9-C11, and other chemicals that may cause an allergic skin reaction and are harmful to aquatic life with long-lasting effects. Always wear protective gloves and avoid breathing spray or mist.

Recommended Products

For additional protection and surface preparation, consider using Rust-Oleum Primers and Sealers. Always refer to the downloadable data sheet for more information.

Product Details

Reference 1302-74702

Data sheet

Manufacturer: Rust-Oleum
For Use By: Professional Use
Interior / Exterior Use: Interior Use
For Use On: Concrete
Brick
Ceilings
Walls
Application Method: Brush
Roller
Spray
Sheen: Matt
VOC Levels: Low (50-149 g/l)
Single, Two or Three Pack: Single
Pack Size: 5L
Dry to Handle (at 20°C): 2 Hours
Dry to Recoat (at 20°C): 5 Hours
Fully Cured (at 20°C): 3 Days
Coverage: 1.35m² per litre
Max. Application Temperature: 35°C
Min. Application Temperature: 5°C
Density: 1,22
Heat Resistance (up-to): 50 °C (dry heat)
VOC: 57 g/l
Shelf Life (from date of manufacture): 4 years
Touch Dry: 1 Hour
Colour(s): White
Base Type: Water-Based
Suitable For Use On: Kitchen Ceilings
Suitable For Use On: Bathroom Ceilings
Suitable For Use On: Bathroom Walls
Suitable For Use On: Washrooms
Suitable For Use On: Concrete
Suitable For Use On: Washroom Ceilings
Suitable For Use On: Brick
Suitable For Use On: Shower Rooms
Suitable For Use On: Walls
Suitable For Use On: Washroom Walls
Suitable For Use On: Kitchens
Suitable For Use On: Shower Room Walls
Suitable For Use On: Bathrooms
Suitable For Use On: Shower Room Ceilings
Suitable For Use On: Concrete Walls
Suitable For Use On: Brick Walls
Suitable For Use On: Ceilings
Suitable For Use On: Kitchen Walls
Suitable For Use On: Breweries
Suitable For Use On: Concrete Ceilings
Suitable For Use On: Brewery Walls
Suitable For Use On: Brewery Ceilings
Finish: Matt
Application Method: Brush
Application Method: Roller
Application Method: Spray
Manufacturer: Rust-Oleum
Usages: Anti-Condensation
Product Usage Type: Sealer
Fastest Delivery: Next Working Day
Colour Family: White
Categorised As: Anti-Condensation Paints
Product Focus: Mould & Damp Proof Paints
Seasonal: Cold Weather

Attachments

Download

Product Data Sheet

Download

Safety Data Sheet

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Diane on 2024-04-06 21:02:13	Question: Is it possible to wallpaper over anti-condensation paint without losing its benefits.
	Answer from Rawlins’ Technical Team: This product is designed for application to ceilings or upper parts of walls where steam or water vapour formation occurs, to prevent condensation and dripping but not designed for overpainting. Assuming the surface is clean, dry, sound, any areas of mould or surface grime treated with N-Virol Suretherm Goodbye Mould Cleaning Spray to remove this build up, you can apply 2 coats of N-Virol Suretherm Goodbye Mould Anti Condensation Paint. This product will aid the reduction of condensation forming on the treated surfaces but also allow overpainting or wallpapering over without reducing or affecting the performance.

Pat Rooney on 2018-06-18 23:45:14	Question: Is this product suitable for application to the underside of a corrugated iron shed roof?
	Answer from Rawlins’ Technical Team: Yes, assuming the surface is bare metal, after preparation (see product data sheet) apply Rust-Oleum Mathys Metal Cladding Primer followed by Rust-Oleum 5090 Anti-Condensation Coating. Please note that Rust-Oleum 5090 Anti-Condensation Coating works in an environment where there is short term high humidity followed by longer periods when humidity can escape e.g. bathrooms. It cannot work where the humidity builds up and cannot then escape. So if this shed was closed and humidity built up a as a result of sunshine, you would still get condensation forming and then dripping down from ceiling.

IMPORTANT SHIPPING & DELIVERY INFORMATION

Rust-Oleum 5090 Anti-Condensation Coating is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

Rust-Oleum Mathys Metal Cladding Primer

Available in white, light and dark grey. For use on metal substrates including bare, blasted, galvanized, and plastisol-coated surfaces. Can be overcoated with a recommended cladding paint such as Metal Cladding Topcoat. Anti-corrosive primer. Rapid curing. Water-based and low-VOC. Overcoatable in 1 hour. Provides excellent corrosion...

£179.56 (incl. VAT)

Shop now

In Stock and Available for Delivery

Rust-Oleum 9169 Epoxy Rust Primer

Available in Red Oxide. Three-component epoxy rust primer. For use on rusted steel surfaces. High adhesion and corrosion protection. Penetrates rust and inhibits further rusting. Professional use only.

£182.18 (incl. VAT)

Shop now

In Stock and Available for Delivery

General Painting Application Kit

Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...

£12.08 (incl. VAT)

Shop now

In Stock and Available for Delivery

COVERAGE CALCULATOR
Units
Total area²
Or enter length and width dimensions:
Length
Width

Follow us on:

Rust-Oleum 5090 Anti-Condensation Coating

Rust-Oleum 5090 Anti-Condensation Coating

Rust-Oleum 5090 Anti-Condensation Coating - White Hygienic Topcoat

Application and Usage

Features and Benefits

Recommended Surfaces

Restrictions and Limitations

Health and Safety

Recommended Products

Data sheet

Questions

Question about the product

IMPORTANT SHIPPING & DELIVERY INFORMATION

Rust-Oleum Mathys Metal Cladding Primer

Rust-Oleum 9169 Epoxy Rust Primer

General Painting Application Kit