- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
An acrylic solvent-based roof coating with added fibres for increased tensile strength, with versatile waterproofing qualities. Highly durable and applicable in damp weather conditions, Cromar Acrypol+ can be applied to almost any surface, including:
-
- Flat Roofs, roofing felt, flashing, leadwork, gutters
- Brickwork, chimney stacks, asphalt, concrete, bituminous surfaces
- Suitably prepared metals, PVC, roof lights, asbestos, glass, fibreglass
- Indefinite shelf-life
- Dries into a durable elastic overlay
- Allows trapped moisture to evaporate, preventing blistering
- Generally requires no primers or sealers
- Please note: Acrypol+ is not suitable for application on wooden surfaces. Please see the Limitations section below for more information.
Description
Cromar Acrypol+ Waterproof Roof Coating was specifically developed to provide a solution for carrying out the day to day maintenance requirements of those involved in roof waterproofing protection.
As with most water penetration problems associated with leaking roofs, the need to carry out remedial repairs is very rarely possible during long spells of inclement weather. This is mainly due to the fact that in order to carry out an effective long term repair to leaking roofs, it is generally necessary to ensure that the surfaces to be treated are completely dry.
A specific feature is incorporated with added fibres, fibres that act like a built‐in scrim. These fibres interlace when the coating is applied – filling and bridging gaps and cracks (up to 10mm wide). The fibres increase the tensile strength of the dry film making it more durable ‐ a big plus.
Quick Links - Click To Jump To Section:
Features & Benefits
- Applicable on almost any surface
- Indefinite shelf-life
- Applicable under damp weather, allowing repairs during poor conditions
- Added fibres increase the tensile strength of the Acrypol+
- Dries into a durable elastic overlay
- Allows trapped moisture to evaporate, preventing blistering
- Generally requires no primers or sealers
Please note: On highly porous/friable surfaces such as concrete, asbestos or where stone chippings have been removed, better application results may be obtained by first applying the recommended Acrypol sealer AS8000.
Application
- Acrypol+ can be applied to the surface / substrate by brush or the unique Acrypol Squeegee at a coverage rate of 1kg/m² minimum to 2kg/m²
- Coverage rates can vary depending on surface porosity and texture
- When the surface is damp Acrypol + should first be worked into the surface with the brush or squeegee in a circular motion to remove excess moisture and ensure total adhesion prior to brushing out fully
Limitations
- Acrypol+ is not suitable for balconies and walking surfaces, nor recommended for the treatment of wooden surfaces, fishponds or internal use
- Air conditioning vents should be sealed for a minimum of 24 hours during and after the application of Acrypol+
- It is the user’s responsibility to ensure suitability for use. Please see safety data sheet (see 'Data Sheets' tab above) for more information
- Read the label carefully for essential health and safety information prior to use
Technical Data
| Finish | Slight Gloss |
| Volume solids | 53% |
| VOC (g/l) | 453 |
| Specific Gravity | 1.09-1.13 |
| Drying Time | 24 hours |
Product Details
10673-994716
Data sheet
- Manufacturer
- Cromar
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- Concrete Roofs
Flat Roofs
Brick
PVC
Fibreglass
Bituminous Surfaces
Leadwork
Metal Roofs
Asphalt Roofs
Asbestos Roofs
Guttering
Glass Roofs - Application Method
- Brush
Squeegee - Sheen
- Semi-Gloss
- Single, Two or Three Pack
- Single
- Pack Size
- 2.5KG
5KG
20KG - Coverage
- 1-2kg/m²
- UN Number
- UN1263
- Colour(s)
- Standard Colours
- Base Type
- Solvent-Based
- Suitable For Use On
- Concrete Roofs
- Suitable For Use On
- Asphalt Roofs
- Suitable For Use On
- Asbestos Roofs
- Suitable For Use On
- Guttering
- Suitable For Use On
- Glass Roofs
- Suitable For Use On
- Flat Roofs
- Suitable For Use On
- Brick
- Suitable For Use On
- Suitably Prepared Metal
- Suitable For Use On
- PVC
- Suitable For Use On
- Fibreglass
- Suitable For Use On
- Bituminous Surfaces
- Suitable For Use On
- Lead
- Suitable For Use On
- Metal Roofs
- Finish
- Semi-Gloss
- Application Method
- Brush
- Application Method
- Squeegee
- Manufacturer
- Cromar
- Usages
- Waterproofing
- Product Usage Type
- Topcoat
- Product Usage Type
- Roof Coating
- Product Range
- Acrypol
- Colour Family
- Grey
- Colour Family
- Black
- Colour Family
- White
- Categorised As
- Roof Paints > Low Temperature Emergency Waterproofing
- Seasonal
- Cold Weather
Questions
Question about the product
Christina
on
2023-10-25 11:43:45
| Question:
How long before a coat of paint starts to break down and needs to be reapplied? |
Answer from Rawlins’ Technical Team:
Assuming you have a clean, dry, sound substrate that is prepared in accordance with the techncial datasheet, this product should provide a minimum 5 years before overcoating is required. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Cromar Acrypol+ Waterproof Roof Coating is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
