Follow us on:

Sika Parex 355 AVU Reinforcing Mesh | Glass Fibre Reinforcement

Sika Parex 355 AVU Reinforcing Mesh

634408
SIK9545

Parex 355 AVU Reinforcing Mesh is a green coloured glass fibre mesh fabric combined with specially designed surface treatments that can be used in a wide range of Parextherm and Parexdirect render applications. For ease of identification the 355 AVU mesh is coloured green and has the ‘Parex’ name and logo throughout the mesh.

  • High mechanical strength and excellent dimensional stability
  • ETA 04-0014 Parextherm EPS EWI systems, ETA 11-0110 Parextherm SW (Stone Wool) EWI systems

Size
£144.25(incl. VAT)
£120.21(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

questions 1 question about the product
Description

Quick Links - Click To Jump To Section:




Features & Benefits


  • Mainly used as one component of the Parex range of external thermal and direct render systems
  • High quality synthetic coating on the glass yarn protects the mesh against alkaline influences from the adhesives and base coat materials that are used
  • High mechanical strength
  • Excellent dimensional stability
  • Compatible with all Parextherm and Parexdirect render systems
  • ETA 04-0014 Parextherm EPS EWI systems
  • ETA 11-0110 Parextherm SW (Stone Wool) EWI systems



Mesh Installation Within Base Coat


355 AVU mesh has been specifically designed for use in the application of Maite when used as part of a Parextherm or Parexdirect render system. Consult the specific product data sheets for each render system for application guidance. Do not apply into frozen substrates where there is a risk of frost.

  • Overlap the mesh a minimum of 100mm to all horizontal and vertical edges
  • 355 AVU reinforcing mesh encapsulated within the render. When additional reinforcement is required, use a primary layer of the following meshes:
  • For high absorption substrates e.g. lightweight block, terracotta, brickwork etc, or low absorption substrates e.g. dense concrete, smooth engineering bricks etc, apply a layer of Microgobetis 3000. For full guidance on which substrates this is required on, always refer to the Parex project specification



Mesh Installation Around Openings


Reinforce the corners with 355 AVU reinforcing mesh to all openings - minimum dimension 300 x 300 mm before applying the main 355 AVU reinforcing mesh.

When using two layers of mesh, place the appropriate primary layer of mesh into the render behind the 355 AVU reinforcing mesh and butt the joints (do not overlap). Embed the 355 AVU reinforcing mesh over the primary mesh and overlap the joints a minimum of 100 mm in all situations. Ensure the mesh is fully embedded within the render coat. If an ashlar cut is required, ensure the mesh is placed sufficiently deep enough to avoid showing through the back face of the ashlar cut. (Additional thickness of render will be required for these applications).

Reinforce the corners with 355 AVU reinforcing mesh to all openings - minimum dimension 300 x 300 mm before applying the main 355 AVU einforcing mesh.

To provide the correct level of reinforcement benefit, always ensure the joints of the 355 AVU reinforcing mesh and the additional layers of mesh never meet in the same location but are positioned a minimum of 200 mm apart from each other.



Product Details
9545-962450

Data sheet

Manufacturer
Sika
Interior / Exterior Use
Exterior Use
For Use On
Render
Concrete
Terracotta
Blockwork
Brick
Pack Size
1m x 50m roll
Suitable For Use On
Concrete
Suitable For Use On
Brick
Suitable For Use On
Render
Suitable For Use On
Blockwork
Suitable For Use On
Terracotta
Manufacturer
Sika
Components
1K
Usages
Construction
Product Usage Type
Reinforcing Mesh
Product Range
Parex
Categorised As
Reinforcement Mesh
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)
questions Nigel Wilson on 2024-07-08 13:09:05
Question: 

Could you tell me the temperature ranges this material will resist and if it would omit dangerous fumes

Answer from Rawlins’ Technical Team:

Assuming this product is being used within render, the temeprature range will be associated to the working temepratures of render, which are around 5C and rising.

This product isn't subject to REACH, and is classified as non-hazardous.

IMPORTANT SHIPPING & DELIVERY INFORMATION

Sika Parex 355 AVU Reinforcing Mesh is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT