- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Page 4 - International Products
International Interline 955 Retarder Solution
International Interline 955 can be applied in a wide range of climatic conditions, including material temperatures up to 35°C (95°F). However, at material temperatures greater than 25°C (77°F) the use of International Interline 955 Retarder Solution is required in order to maintain the working pot life, allowing normal airless spray methods to...
International Intersleek 717
International Intersleek 717, is a two pack foul release system linkcoat. Enables application of the Intersleek 700 and Intersleek 900 foul release systems over SPC antifoulings For use at maintenance & repair Hard dry in as little as 3 hours (at 25°C) Dries down to 0°C in 24 hours Good application rate of 5.4 m²/litre at 100...
International Intersmooth 7460HS SPC
High solids, high performance, TBT free, low friction, self polishing copolymer (SPC) antifouling. Particularly suitable for use where solvent emissions need to be reduced. Specifically designed for deep sea vessels. For use at maintenance & repair. Dries (and can be overcoated) down to -5°C. Compliant with the International...
International Intertuf 203
International Intertuf 203, is a one pack, tar free vinyl anticorrosive which can be used at temperatures down to -5°C. As an anticorrosive for both above and below the waterline and also as a sealer coat over Tributyltin (TBT) antifoulings Suitable for use with controlled cathodic protection For use at newbuilding, maintenance &...
International Intershield 803
International Intershield 803, a two pack, abrasion resistant pure epoxy coating with excellent mechanical properties for to limit mechanical damage and subsequent corrosion in maintenance & repair. Excellent abrasion resistance Suitable for use with controlled cathodic protection For vessel areas other than underwater hull, can be...
International Intertuf 262
International Intertuf 262 is a surface tolerant, two pack epoxy primer. As an epoxy anticorrosive coating for use from keel to rail Suitable for use with controlled cathodic protection For use at newbuilding, maintenance & repair or on board maintenance Certified for: Food Contact - Carriage of Grain (NOHH) Fire Resistance -...
International Intersmooth 360 SPC
Black, brown, and dark-red high performance, TBT free, self polishing copolymer (SPC) antifouling system with patented copper acrylate technology. Specifically designed for coastal vessels. For use at maintenance & repair. Controlled polishing rate and continuous biocide release. Self-smoothing in service. Up to 36 months in-service...
International Intersmooth 7465HS SPC
High performance, TBT free, low friction, self polishing copolymer (SPC) antifouling in brown. Particularly suitable for use where solvent emissions need to be reduced. Specifically designed for deep sea vessels. For use at newbuilding. Compliant with the International Convention on the Control of Harmful Anti-fouling Systems on Ships,...
International Interzone 762
International Interzone 762, a two component high performance anti-corrosive coating for application at new construction where high build and fast cure combine to optimise the throughput of steelwork and minimise production overheads. Can also be applied as a maintenance coating on site High build characteristics Minimises downtime and...
International Intergard 162
International Intergard 162 is a two pack, tar free, epoxy tie coat. For use at newbuilding or maintenance and repair Used as a primer for internal steel work Fire Resistance - Surface Spread of Flame (Exova Warringtonfire) Fire Resistance - Smoke and Toxicity (Exova Warringtonfire) Fire Resistance - Marine Equipment Directive...
International Interbond 808
International Interbond 808 a two-component high performance epoxy coating for use in water ballast tanks, cofferdams, void spaces, wet spaces, bilges and crude oil tanks. Light colour Tar free DNV/Marintek B-1 classification Surface tolerant/damp tolerant Short time to immersion Low VOC content IMO PSPC compliant Order a...
International Intergard 7600
International Intergard 7600 a two-component, pure epoxy universal primer. Universal application Optimised application properties True long overcoating intervals (up to 6 months) Good abrasion resistance Anticorrosive properties Suitable for application at low temperatures (down to -5°C) Suitable for use with controlled cathodic...
International Intershield 300HS
International Intershield 300HS is a high-solids, abrasion resistant, aluminium pure epoxy coating providing excellent long term anti-corrosive protection and low temperature capability. High solids version of International Intershield 300 A universal primer which can be applied directly to mechanically prepared shop primer or suitably...