- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Page 2 - Metal Topcoats
Subcategories
Sherwin-Williams Acrolon 1850
Sherwin-Williams Acrolon 1850 is a two pack Isocyanate free finish based on an acrylic epoxy binder system. It is a finish coat for exterior exposed surfaces where retention of gloss is required, and the use of isocyanate products is precluded or undesirable. Available in 400+ colours, including RAL and BS Order a Colour Sample
Flag QD Metal Paint Smooth Finish
Flag QD Metal Paint Smooth Finish is a quick air drying gloss finish which gives a hard durable finish to metal substrates with excellent corrosion resistant properties. Provides good protection when used in conjunction with Flag Anti-Corrosive QD Metal Primer. Ideal for interior and exterior Industrial Structural Steel Suitable for a wide...
HMG Nisocoat 2
HMG Nisocoat 2 (Base) is a 2K non-isocyanate acrylic product formulated to provide a tough, chemically resistant, high quality coating. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Nisocoat 2 Hardener (Part 2) HMG...
Hydron Nu-Steel SP Finish
Nu-Steel SP Finish is an economical decorative metal topcoat, for the protection of all types of metal. Protection for up to 5 years conforming to BS 5493, the code of practice for the protective coating of iron and steel against corrosion Finishing coat of the Nu-Steel SP System. For use on properly prepared steel such as parapet/guard...
Rust-Oleum Hard Hat 2111 Sparkling Aluminium
Available in a sparkling aluminium finish. Topcoat for bare metal, galvanised, zinc primers, or anti-rust primers. Touch dry in 15 minutes, dry to handle in 30 minutes. Provides excellent protection, withstands up to 100°C. Suitable for light industrial exposures and normal humidity interior applications. Free from lead and chromate...
Rust-Oleum Hard Hat Topcoat Custom Colour Aerosols
4,000+ Colours. Multi-Surface Aerosol. Glossy Finish. Fast drying - touch dry in just 15 minutes (at 20°C). Best available hiding power. Heat-resistant up to 100°C. Based on lead and chromate-free pigments. Up to 2.5 m² coverage per spray can at 25 μm dry.
Jotun Hardtop Optima
Jotun Hardtop Optima has optimal adhesion to selected primers, while maintaining its flexibility throughout the system’s working life. Extra focus has been put on achieving a formulation that ensures predictable curing and as a result is fully re-coatable at any stage of curing. The recommended selection of compatible primers is limited to...
Zinga Alu ZM
Alu ZM, a quick-drying one-pack coating for use as an aluminium topcoat on Zinga or applied directly onto old, uncorroded hot-dip galvanised or thermal sprayed zinc substrates. One pack system Topcoat for Zinga Apply by brush or sprayer Not to be applied by a roller Touch dry in 25 minutes, full cured in 24 hours
Rust-Oleum Hard Hat Advanced 2700 Primer and Topcoat in 1
9 colours in gloss, matt or satin finishes. Two-pack aerosol paint; functions as both primer and topcoat. For prepared painted substrates in light industrial exposures. Internal or external use. Strong corrosion protection, high colour retention. Fast-drying; touch dry in 20 minutes. Lead- and chromate-free.
International Interfine 979
International Interfine 979 significantly improves upon the gloss and colour retention exhibited by typical polyurethane finishes also displays the same corrosion resistance and has enhanced mechanical properties when compared to traditional epoxy technology. Excellent long term color and gloss retention Contains no free isocyanate Low...
Jotun Hardtop Pro
Jotun Hardtop Pro is a low VOC, high volume solids, isocyanate free, economical polysiloxane topcoat for offshore structures, tank farms, refineries, power plants, bridges and buildings. Very good colour and gloss retention Very good abrasion resistance Very good chemical resistance Low VOC and high volume solids Isocyanate free Now...
Jotun Hardtop XPL
Jotun Hardtop XPL is a two component chemically curing aliphatic acrylic polyurethane coating that has a matt finish with very good gloss retention. A matt finish aliphatic acrylic polyurethane coating with very good gloss retention. Good application properties with low dry spray and should be used as a topcoat in atmospheric environments....
Flag QD Metal Paint Hammer Finish
Flag QD Metal Paint Hammer Finish is a quick drying paint to which gives a ‘hammer finish’ to metal substrates with excellent corrosion resistant properties. Provides good protection when used in conjunction with Flag Anti-Corrosive QD Metal Primer. Ideal for interior and exterior Industrial Structural Steel Suitable for a wide variety of...
Hempel Hempaquick Enamel 53840
Hempaquick Enamel 53840 is a quick drying alkyd enamel with good gloss and colour retention. Recommended use as a topcoat on steel in mild to moderately corrosive environments. In case of line application of small items to be packed together, Hempalin Enamel 52140 is recommended. For professional use only. More Information Delivery Info...
Zinga Zingaceram PU
Zingaceram PU, a 2-pack system with ceramic particles for high chemical and abrasion resistance in tough environments, such as dust and wind-blown sand. Recommended for use as a top coat finish in a Zinga system. Available in more than 180 RAL colours Topcoat 2-pack system for Zinga Apply by brush, roller, conventional sprayer or airless...
Jotun Hardtop XPF
Jotun Hardtop XPF is a two component chemically curing aliphatic acrylic polyurethane coating that is fast drying and has a high solids content. This product is subject to a lead time of approximately 14 Working Days Gloss finish Very good gloss retention Should be used as topcoat in atmospheric environments Can also be applied at sub...
Sherwin-Williams Kem-Kromik 165
Kem-Kromik 165 (formerly known as Sherwin A165) is a silicone alkyd with a highly durable, high gloss finish designed for external marine superstructures and used by the Ministry of Defence. Single component, Kem-Kromik 165 can be applied by brush or conventional/airless sprayer. Recommended use with Kem-Kromik 671 Undercoat Touch dry in 2...
International Intercryl 700
International Intercryl 700, a single component water borne finish formulated on weather resistant acrylic copolymer technology, a durable finish coat for both water based and solvent based systems where colour and gloss retention are important. 4,800+ colours, inc. RAL, RAL Design & Effect, BS, NCS & the new NCS 2050 colours Dries...
Jotun Hardtop XP Alu
A high solids, metallic aluminium finish version of the standard Jotun Hardtop XP. Jotun Hardtop XP Alu is recommended for topside, deck and superstructure areas in the marine industry and recommended for offshore environments, refineries, power plants, bridges and buildings as well as a wide range of industrial structures in the...
Sherwin-Williams Transgard TG169
Sherwin-Williams Transgard TG169 is a high performance fast drying acrylic urethane semi-gloss finish for use where long term exterior colour retention characteristics are required. Fast drying acrylic urethane Semi-gloss finish Good tolerance to low temperature curing conditions Suitable for use as final coat or coats in conjunction...
PPG SigmaDur 1800
PPG SigmaDur 1800 is a two-component, high solids polymeric urethane with excellent resistance to atmospheric exposure conditions that cures down to –5°C (23°F), that can be recoated even after long atmospheric exposure. Available in 2,600+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours Outstanding colour and gloss retention...
PPG SigmaDur 541
PPG SigmaDur 541, a two-component, non-isocyanate epoxy acrylic finish. Available in 2,300+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours Non-isocyanate Good gloss and color retention Non-yellowing Long pot life but quick-drying Good application properties, also without thinning Applications segments include...
International Inter H2O 699
International Inter H2O 699 a two-component waterborne acrylic polyurethane finish. Provides excellent durability Long term recoatability Compatible with a wide range of International systems
Hydron Nu-Steel TP Finish
Nu-Steel TP is a urethane-based system with an excellent decorative appearance and outstanding resistance to solvents and chemicals, making it a first choice coating system for use on steelwork. High performance product giving protection up to 15 years to first maintenance when used as a complete system For use on properly prepared steel...
Hydron Nu-Steel QD Finish
Nu-Steel QD Finish is an economical decorative metal topcoat, for the protection of all types of metal. Finishing coat of the Hydron Nu-Steel QD Primer/Undercoat. For use on properly prepared steel such as parapet/guard rails and architectural steelwork. Ideal for steelwork requiring a fast return to public use Up to 5 years protection...
Resimac 508 UVPU
Resichem 508 UVPU is a two-component, solvent based UV stable polyurethane coating designed for the long term protection of steel and concrete structures against corrosion in C1-C5 corrosive environments, UV degradation and weathering. Available in a wide range of RAL or British Standard colours. Apply to metallic surfaces primed with 506...
Sherwin-Williams Acrolon C137V2 - Aluminium
A high performance, fast drying acrylic urethane aluminium gloss finish for use where long term exterior gloss and colour retention characteristics are required. Also available in 450+ tintable colours - see Sherwin-Williams Acrolon C137V2 Please note this product is made to order and is subject to a Minimum Order Quantity of 150L and may...
PPG AquaCover One 645
2,600+ gloss colours. For interior accommodations, machinery spaces and engine rooms. Suitable for areas where solvents cannot be used. Fast-drying and recoatable. Good weather resistance and colour retention. Important! Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10%...
Sika SikaCor EG 5
9 colours. For heavy duty corrosion protection of atmospheric exposed and submerged steel structures. In combination with 2-pack primer and intermediate coats of the SikaCor and Sika Permacor product range. Can also be used as a line marking paint on selflevelling and broadcasted epoxy and polyurethane resin based floors e. g. for car...
Owatrol RA85 Aluminium Paint
Flexible anti-corrosive high gloss aluminium paint finish. Restores rusted and corroded surfaces to an acceptable appearance to give lasting protection and greatly prolong the life of the treated surface. Excellent abrasion resistance and withstands chemical attack. Ideal in aggressive climatic conditions where a high resistant finish is...