- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Jotun Penguard Tie Coat 100 is a two component polyamide cured high molecular weight epoxy coating specially designed as a tie coat/sealer on top of inorganic zinc silicate primers, galvanised steel and thermally sprayed zinc. To be used as a primer in a complete system in atmospheric environments.
Recommended for offshore environments, refineries, power plants, bridges and mining equipment.
Jotun Penguard Tie Coat 100 is a two component polyamide cured high molecular weight epoxy coating specially designed as a tie coat/sealer on top of inorganic zinc silicate primers, galvanised steel and thermally sprayed zinc. To be used as a primer in a complete system in atmospheric environments.
Jotun Penguard Tie Coat 100 is suitable for structural steel and piping to be exposed to corrosive environments. Recommended for offshore environments, refineries, power plants, bridges, buildings and mining equipment.
Approvals and certificates
- Pre-qualification testing in acordance with NORSOK M-501, Rev. 5, System 1, suitable for exterior exposure in offshore environment, below 120°C.
Additional certificates and approvals may be available on request.
Data sheet
- Manufacturer
- Jotun
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- Water / Solvent Based
- Solvent
- For Use On
- Galvanized Steel, Steel, Zinc
- Application Method
- Spray, Airless Spray, Brush
- Sheen
- Semi-Gloss
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Product Certifications
- NORSOK M-501, Rev. 5, System 1,
- Pack Size
- 19.5L
- Coverage
- 8.4 to 17m² per litre
- Touch Dry
- 1 hour
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN3469
- Base Type
- Epoxy
- Base Type
- Solvent Based
- Suitable For Use On
- Steel
- Suitable For Use On
- Galvanised Steel
- Suitable For Use On
- Thermally Sprayed Zinc
- Suitable For Use On
- Inorganic Zinc Silicate Primer
- Finish
- Semi-Gloss
- Application Method
- Brush
- Application Method
- Spray
- Usages
- Atmospheric
- Usages
- Tie Coat
- Usages
- Holding Primer
- Product Usage Type
- Primer
- Product Usage Type
- Midcoat
- Product Range
- Penguard
- Colour Family
- Red
- Dry to Recoat (@ 20-25°C)
- 6 hours
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Jotun Penguard Tie Coat 100 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT