- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Specifically formulated to carry out preliminary priming treatments on surfaces before applying epoxy and polyurethane resin systems from the Mapefloor range, self-levelling cementitious mortars from the Ultratop/Ultratop Living range and of Ultratop Loft, to protect and coat civil and industrial floors, terrazzo floors and cementitious substrates in general. Some application examples:
- Fluid adhesive to seal cracks and make structural bonds
- Adhesion promoter for:
- Epoxy and polyurethane coating products in general
- For self-levelling and/or multi-layered coating products
- For flooring made from synthetic mortar
- For coatings from the Ultratop, Ultratop Living and Ultratop Loft ranges
- For professional use only
Primer SN is a two-component, fillerized epoxy resin-based primer applied with a roller, metal trowel or smooth rake.
Quick Links - Click To Jump To Section:
Features & Benefits
- Coatings made with Primer SN prevent Radon (radioactive natural gas present in the soil) from penetrating inside buildings
- Compliant with DIN ISO/TS 11665-13 standards, verified and certified by the IAF accredited laboratory for radionuclide analysis
- Primer SN may be used as it is or mixed with Quartz 0.5 to improve adhesion of resin coating systems and even out surfaces
- Thanks to its special formulation, Primer SN is characterised by its ability to penetrate into substrates and may even be applied on moderately damp surfaces
Recommendations & Limitations
- Do not apply Primer SN on substrates with rising damp if they are going to be coated with an epoxy or polyurethane system
- Do not dilute Primer SN with solvent or water
- Do not apply Primer SN on dusty, crumbling or weak substrates
- Do not apply Primer SN on substrates with oil or grease stains or stains in general
- Do not apply Primer SN on substrates that have not been prepared according to specification
- Do not mix partial quantities of the components to avoid mixing errors; the product may not harden correctly
- Do not expose the mixed product to sources of heat
- If rooms where the product is being used need to be warmed up do not use heaters that burn hydrocarbons, otherwise the carbon dioxide and water vapour given off into the air will affect the shine on the finish and ruin its appearance. Use electric heaters only
- Protect the product from water for at least 24 hours after application
- Do not apply the product directly on substrates with moisture content higher than 4% and/or with capillary rising damp (check by testing it with a sheet of polythene)
- The temperature of the substrate must be at least 3°C higher than the dew-point temperature
Application & Preparation
Please refer to the data sheets in the tab above for further information.
Data sheet
- Manufacturer
- Mapei
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior Use
- For Use On
- Floors
- Application Method
- Roller
Metal trowel
Smooth Rake - Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5KG
20KG - Coverage
- 0.3-0.7 kg/m² per coat depending on the characteristics of the substrate such as roughness, absorbency, temperature, etc
- Max. Application Temperature
- 35°C
- Min. Application Temperature
- 8°C
- UN Number (Activator)
- UN3082
- UN Number (Base)
- UN2735
- Waiting time
- Without a dry-shake finish of quartz sand: min. 12 hours, max. 48 hours
- Waiting time
- With a dry-shake finish of quartz sand: min. 12 hours, no maximum limit (surfaces must be dry with no dust)
- Suitable For Use On
- Floors
- Application Method
- Roller
- Application Method
- Trowel
- Manufacturer
- Mapei
- Components
- 2K
- Product Usage Type
- Primer
- Workability Time
- 30 mins.
- Hardening
- Dust dry: approx. 6 hours
- Hardening
- Set to foot traffic: approx. 24 hours
- Hardening
- Full hardening time: approx. 7 days
- Colour Family
- Neutral
- Product Type
- Epoxy
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Mapei Primer SN is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT