- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Mapei Mapeplan Anchoring is anchoring with M16 bar in heavy-duty plastic case, to be used in Mapeplan waterproofing system in combination with Mapefix resins for fixings in tunnels. Due to the innovative design, the steel bar is embedded in the rigid PVC case and is included in the product. Different lenghts of the bar are available to match technical specifications and jobsite needs.
- Quick and easy installation
- Combined anchoring system with MAPEI adhesive Mapefix VE SF
For professional use only.
Quick Links - Click To Jump To Section:
Features & Benefits
- Passing-through anchoring in water thight system, without compromising the waterproofing properties
- Protection of the anchoring bar from groundwater, corrosive agents and stray currents
- Quick and easy installation
- Combined anchoring system with MAPEI adhesive Mapefix VE SF. · If a longer bar is required, special sleeves are available to connect the anchoring to the naked part of the bar
Installation
To install the anchors, the procedure below shall be followed:
- Identify the correct position where the anchor has to be placed
- Drill the borehole (diameter: 28 mm at least, min. depth: 210mm) through the PVC and geotextile membrane onto the substrate
- Remove a disk (diameter: approximately 120 mm) of geotextile and PVC membrane around the hole already done corresponding to the rigid flange diameter of the anchoring system
- Flush the hole with compressed air in order to remove dust, powder and loose or detaching part on the internal hole surface
- Fill the hole with chemical resin for structural loads (Mapefix VE SF) making sure that the shank of the anchoring system is placed completely inside the borehole
- Get the heavy duty plastic collar into the borehole
- In order to carry out the welding properly the PVC flange (black side) and the membrane surface around the hole shall be clean and free of dust
- Weld the PVC flange on the already installed PVC waterproofing membrane
Data sheet
- Manufacturer
- Mapei
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- Single, Two or Three Pack
- Single
- Pack Size
- Each
- Manufacturer
- Mapei
- Product Usage Type
- Reinforcement
- Product Range
- Mapeplan
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Mapei Mapeplan Anchoring is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT