- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A special primer specifically formulated for oil contaminated cementitious surfaces and it is applied (after the substrate has been adequately prepared) to improve the adhesion of protective epoxy and polyurethane resin coatings on concrete industrial floor and cementitious substrates in general. Some application examples:
- Adhesion promoter for:
- Epoxy and polyurethane coating in general
- Self-levelling and broadcast systems
- Resin mortar screeds
- For professional use only
Primer CC 200 is a special two-component, epoxy resin-based anchoring primer.
Quick Links - Click To Jump To Section:
Features & Benefits
- Used for priming oil-contaminated cementitious surfaces, after the substrate has been adequately prepared
- Due to its special formulation, Primer CC 200 acts as a barrier to stop oil capillary rise
- Resistant to water, seawater, effluent water, saline solution, mineral oils, lubricants and fuel spills
Recommendations & Limitations
- Do not apply Primer CC 200 on dusty, crumbling or weak substrates
- Do not apply Primer CC 200 on substrates that are not properly prepared
- Do not mix partial quantities of the components to avoid mixing errors; the product may not harden correctly
- Do not expose the mixed product to sources of heat
- If rooms where the product is being used need to be warmed up, do not use heaters that burn fossil fuels. The carbon dioxide and water vapour given off into the air will affect the finish of the coating. Use electric heaters only
- Protect the product from water for at least 24 hours after application
- If more than one coat of finish is applied, do not exceed the maximum recommended re-coat time to guarantee optimum adherence of the coating. If this time is exceeded, the surface must be roughened mechanically before applying the next coat
- Do not apply Primer CC 200 on substrates with capillary rising damp (consult Rawlins Technical on )
- Do not dilute Primer CC 200 with organic solvents
- The temperature of the substrate must be at least 3°C above the dew-point temperature
- Once the surface has been prepared as specified, apply an even coat of Primer CC 200 with a smooth spreader, a roller or paintbrush on concrete substrates
Application & Preparation
Please refer to the data sheets in the tab above for further information.
Data sheet
- Manufacturer
- Mapei
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Floors
- Application Method
- Large brush
Broom
Roller
Straight trowel - Single, Two or Three Pack
- Two-Pack
- Pack Size
- 20KG Kit (17.8KG+2.2KG)
- Coverage
- 0.6-0.8 kg/m² per coat depending on substrate absorption and roughness.
- Max. Application Temperature
- 30°C
- Min. Application Temperature
- 10°C
- Dry to Recoat (at 23°C)
- 18 hours
- Drying time
- 6 hours (Dust dry)
- Touch Dry (at 23°C)
- 12 hours
- Suitable For Use On
- Floors
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Trowel
- Application Method
- Broom
- Manufacturer
- Mapei
- Components
- 2K
- Usages
- Oil Resistant
- Product Usage Type
- Primer
- Workability Time
- 35 mins
- Hardening
- 7 days
- Colour Family
- Grey
- Product Type
- Epoxy
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Mapei Primer CC 200 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT