- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Hempalin Primer Hi-Build 13200 is a quick-drying, urethane-modified alkyd primer.
- General purpose primer for Hempalin systems for protection of steel in mild to medium atmospheric corrosive environments.
- Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory i.
For professional use only.
Quick Links - Click To Jump To Section:
Features & Benefits
- Quick-drying, urethane-modified alkyd primer
- Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory i
- General purpose primer for Hempalin systems for protection of steel in mild to medium atmospheric corrosive environments
- Service temperature: - Maximum, dry exposure only: 120°C
Preparation
- Cleanliness:
- Remove oil, grease and other contaminants by suitable detergent cleaning
- Remove salts, detergents and other contaminants by high pressure fresh water cleaning
- New build:
- Abrasive blasting to min. Sa 2½ (ISO 8501-1) / SP 10 (SSPC)
- Remove dust, blast media and loose materials
- Maintenance and Repair:
- Abrasive blasting to min. Sa 2 (ISO 8501-1) / SP 6 (SSPC)
- Minor areas may be hand or power tool cleaned instead of abrasive blasting
- Remove dust, blast media and loose materials
- Roughness - Surface profile Medium (G) (ISO 8503-2).
Application
- Stir well before use
- Thinner/Cleaner Hempel's Thinner 08080 up to 5%
- Apply with roller, brush or airless spray (Nozzle pressure: 200 bar [2900 psi] Nozzle orifice: 0.021-0.023). If brush or roller application is used, more coats will be necessary to achieve the specified dry film thickness. Spray data are indicative and subject to adjustment. Pressure is for a material temperature of 20°C [68°F]
- Dry film thickness: 50 - 80 micron (75 recommended)
- Wet film thickness: 110 - 170 micron (150 recommended)
- To avoid condensation, apply on a clean and dry surface with a temperature that is at least 3°C above the dew point
- Coverage between 5.9 m²/L - 10m²/L (recommended 6.3m²/L)
- Touch/surface dry in 120 minutes @ 20°C
- Overcoat with Hempalin Enamel 52140
To obtain the drying time stated, it is important to maintain sufficient ventilation during application, drying and curing. If the maximum overcoating interval is exceeded, roughening of the surface is necessary to ensure intercoat adhesion.
Product may be specified in another film thickness than indicated depending on purpose and area of use. This will alter spreading rate, drying and curing time and overcoating interval. For best performance, avoid excessive film thickness
Data sheet
- Manufacturer
- Hempel
- For Use By
- Professional Use
- For Use On
- Steel
- Application Method
- Roller, brush, spray
- Sheen
- Flat
- Single, Two or Three Pack
- Single
- Coverage
- 5.9 m²/L - 10m²/L (recommended 6.3m²/L)
- Recommended Thinner/Cleaner
- Hempel's Thinner 08080
- Solids by Volume
- 47 ± 2%
- Heat Resistance (up-to)
- Maximum, dry exposure only: 120°C
- VOC
- 388 g/L
- Shelf Life (from date of manufacture)
- 60 months @ 25°C
- Recommended Dry Film Thickness
- 50 - 80 micron (75 recommended)
- Recommended Wet Film Thickness
- 110 - 170 micron (150 recommended)
- Specific Gravity
- 1.3 kg/L
- Flashpoint
- 39°C
- Colour(s)
- White
- Base Type
- Solvent-Based
- Base Type
- Alkyd
- Suitable For Use On
- Steel
- Finish
- Flat
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Manufacturer
- Mapei
- Usages
- High Build
- Usages
- Atmospheric
- Product Usage Type
- Primer
- Product Range
- Hempalin
- Colour Family
- White
- Dry to Recoat (@ 20-25°C)
- 5 hours
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Hempel Hempalin Primer HI-Build 13200 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Hempel Thinner 08080
Hempel's Thinner 08080 is a thinner for Hempel's Hempatex, Hempaquick, Hempathane topcoats and enamels, Hempel's Antifoulings, Globic and Dynamic, Oceanic and Olympic. For paint to be applied in a low film thickness (for instance as a "sealer coat") or if the paint has become too thick, e.g. in cold weather Tools can usually be cleaned...
Hempel Hempalin Enamel 52140
Hempalin Enamel 52140 is a glossy, general purpose, alkyd topcoat forming a weather resistant coating. The product is flexible and resistant to salt water and spillage of mineral oil and other aliphatic hydrocarbons. Recommended as finishing coat for alkyd systems on exterior and interior steel and woodwork in mildly to moderately corrosive...