- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Hempinol 10220 is a physically drying, high-build, bituminous coating.
- For inexpensive short to medium-term anticorrosive protection of interior and exterior steelwork not exposed to direct sunlight. Not resistant to continuous mechanical stress
- EC-type examined as a low flame spread material when used as part of a predefined paint system
For professional use only.
Quick Links - Click To Jump To Section:
Features & Benefits
- Physically drying, high-build, bituminous coating
- For inexpensive short to medium-term anticorrosive protection of interior and exterior steelwork not exposed to direct sunlight
- Not resistant to continuous mechanical stress
- Service temperature: - Maximum, dry exposure only: 80°C
- EC-type examined as a low flame spread material when used as part of a predefined paint system
Preparation
- Cleanliness:
- Remove oil, grease and other contaminants by suitable detergent cleaning
- Remove salts, detergents and other contaminants by high pressure fresh water cleaning
- New build:
- Abrasive blasting to min. Sa 2 (ISO 8501-1) / SP 6 (SSPC)
- Remove dust, blast media and loose materials
- Maintenance and Repair:
- Minor areas may be hand or power tool cleaned instead of abrasive blasting
- Remove dust, blast media and loose materials
- Roughness - Surface profile Medium (G) (ISO 8503-2).
Application
- Stir well before use
- Thinner/Cleaner: Hempel's Thinner 08080
- Apply by brush, roller or airless spray (Nozzle pressure: 200 bar [2900 psi] Nozzle orifice: 0.021-0.025")
- Dry film thickness: 125 - 200 micron (175 recommended)
- Wet film thickness: 225 - 350 micron (310 recommended)
- Coverage: 2.8m²/L - 4.5m²/L (3.2m²/L recommended)
- Touch dry in 10 hours, hard dry in 16 hours @ 20°C
- To obtain the drying time stated, it is important to maintain sufficient ventilation during application, drying and curing
- The surface must be clean before overcoating
If brush or roller application is used, more coats will be necessary to achieve the specified dry film thickness. Spray data are indicative and subject to adjustment. Pressure is for a material temperature of 20°C.
Product may be specified in another film thickness than indicated depending on purpose and area of use. This will alter spreading rate, drying and curing time and overcoating interval. For best performance, avoid excessive film thickness.
Data sheet
- Manufacturer
- Hempel
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Steel
- Application Method
- Brush, roller, spray
- Sheen
- Flat
- Single, Two or Three Pack
- Single
- Touch Dry (at 20°C)
- 10 hours
- Coverage
- 2.8m²/L - 4.5m²/L (3.2m²/L recommended)
- Solids by Volume
- 57 ± 2%
- Heat Resistance (up-to)
- Maximum, dry exposure only: 80°C
- VOC
- 322 g/L
- Shelf Life (from date of manufacture)
- 60 months @ 25°C
- Recommended Dry Film Thickness
- 125 - 200 micron (175 recommended)
- Recommended Wet Film Thickness
- 225 - 350 micron (310 recommended)
- Specific Gravity
- 1.3 kg/L
- Hard Dry
- 16 hours @ 20°C
- Flashpoint
- 39°C
- Colour(s)
- Jet Black 19990
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Finish
- Flat
- Application Method
- Roller
- Application Method
- Spray
- Application Method
- Brush
- Product Usage Type
- Topcoat
- Product Range
- Hempinol
- Colour Family
- Black
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Hempel Hempinol 10220 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT