- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A 2-component, polyester resin based, bedding mortar used for the bedding and fixing of paving units where same day trafficking and/or exceptional bond is required. Available in Winter and Summer formulations to allow for a temperature range of application between 0°C and 35°C. Its uses include:
- Bedding of paving units
- Fixing mortar for kerb units
- Where rapid return to service and/or exceptional bond is required
- Paved areas, driveways, ramps, parking areas, cycle-ways, walkways, etc
- For professional use
Quick Links - Click To Jump To Section:
Features & Benefits
- Strong bond to a wide range of substrates (concrete, asphalt, etc.)
- Can be applied in damp conditions
- User-friendly pre-packed units
- Easy to mix and apply
- Complements Sika/Parex Streetscape Range
- High early strength gain, allowing same day opening
- Suitable for all trafficked areas
- Can withstand high lateral loading, making it ideal for securing containment kerbs
Important Considerations
- Minimum substrate temperature 5°C
- Cold ambient, substrate or material temperatures will influence the curing characteristics
- Avoid application if rain is scheduled
- Do not thin with solvents. Solvents will prevent proper curing and change mechanical properties
- Component B must be kept dry
- Do not part mix. Mix full units only
Application
Substrate Preparation
Laitance and all loose material including dust, oil and grease should be removed in order to produce a sound surface.
Substrate Quality / Pre-treatment
Mark out areas where paving units are to be laid. Ensure that the surface is free from oil, grease, loose material and standing water to produce a sound, clean, dry or damp surface.
Mixing
Pour resin into polythene or rubber bucket. Add catalysed filler slowly whilst continuously mixing using a slow speed, high torque drill with paddle mixer. Continue mixing until a uniform consistency is obtained.
Application
Apply mixed mortar to the prepared substrate using a suitable trowel. Up to 25mm thickness of mortar may be placed in a single layer. Thicker beds should be placed in 25mm applications. Mortar should be well compacted onto prepared surface. Place the paving unit onto the mortar bed and press down into the required position. Any product extruded from beneath the units can be easily scraped and removed to create a clean and tidy finish.
Curing Treatment
Due to the chemical nature of the product no special curing is required.
Cleaning of Equipment
Clean all tools and application equipment with Sika Thinner C Cleaner immediately after use. Hardened / cured material can only be removed mechanically.
Data sheet
- Manufacturer
- Sika
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Concrete
Asphalt - Application Method
- Trowel
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 14KG
- Coverage
- Yield: approximately 7 litres per 14KG unit
- Max. Application Temperature
- 25°C
- Min. Application Temperature
- 5°C
- UN Number
- UN1866
- Layer Thickness
- Minimum: 2mm
Maximum: 25mm
For thicker sections apply in 25mm increments - Colour(s)
- Standard Colours
- Suitable For Use On
- Asphalt
- Suitable For Use On
- Concrete
- Application Method
- Trowel
- Manufacturer
- Sika
- Components
- 2K
- Usages
- Concrete Repair
- Product Usage Type
- Mortar
- Product Range
- Parex
- Setting Time
- 25°C: 20 mins
15°C: 40 mins
5°C: 80 mins
0°C: 160 mins - Categorised As
- Repairs > Low Temperature Bedding Mortars
- Seasonal
- Cold Weather
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Sika Parex Kerbfix is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT