- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A high performance, two pack polyurethane floor and wall coating which has excellent chemical resistance and light fastness. Hard wearing and tough but flexible coating with very good resistance to impact, abrasion and high temperature. Regularly used in the aviation and automotive industries in workshops, hangars and manufacturing areas due to its excellent resistance to hydraulic oils and fluids such as Skydrol and Hyjet.
- Excellent chemical resistance and UV stable
- Good abrasion and impact resistance
- Skydrol and Hyjet resistant, easy to clean
- Excellent resistance to thermal shock
- Has a degree of flexibility, resistant to hot water
- Tolerant of temperatures up to 100°C
- Abrasion resistant: 67 mg loss per 1000 cycles
- Class I impact resistance
- Bfl-s1 fire classification
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Quick Links - Click To Jump To Section:
Recommended Uses
- Aircraft hangars
- Laboratories
- Automotive workshops
- Prisons and police cells
- Chemical plants
- Medical and healthcare
- Pharmaceutical areas
- Anti-slip finishes created using an aggregate scatter
Surface Preparation
New Concrete Floors: New concrete must be clean, sound, dry, fully cured and surface laitance removed by vacuum enclosed shot blasting or mechanical grinding, a minimum strength of 25N/mm² is required.
Existing Concrete Floors: Remove all dirt, oil, grease, old paint or any other surface contaminants by vacuum enclosed shot blasting, scarifying or mechanical grinding. Fats, oils or greases must be removed by mechanical means and detergent washing and making sure all residue of detergent is washed and removed by rinsing with clean water. Local repairs should be carried out using Resuflor Patch. If the old resin flooring cannot be removed then please consult with our technical team for advice on intercoat adhesion and suitability, as it may not be compatible with the existing floor coating.
Resin floor systems: Where Resutile ST is used as a top coat on a new or existing resin floor system the surface should be clean and dry and ideally be lightly abraded/sanded prior to application as it may interfere with the inter-coat adhesion with Resutile ST.
Timber/Wooden Floors: Must be clean, sound and dry. Old varnish/topcoat must be removed/sanded prior to application as it may interfere with the inter-coat adhesion with Resutile ST.
NOTE: Care must be taken to ensure that surface preparation is thorough but does not disfigure the surface.
Primer
Resutile ST may be applied direct to concrete or as a seal coat or topcoat to a resin floor system specified in our datasheets where a primer is not required. When applied direct to porous substrates the surface may require priming. Dry surfaces may be primed with Resuflor WB or Resuprime ST.
Where the Relative Humidity of the substrate exceeds 75% Resuprime MVT should be specified and selected on the basis of hygrometer readings in accordance with BS 8203. The number of coats to be applied is chosen in accordance with the following table.
ERH% Required Coating Thickness
- 75-85 1 coat of RESUPRIME MVT at 200 microns per coat
- 85-92 2 coats of RESUPRIME MVT at 200 microns per coat
- 92-97 3 coats of RESUPRIME MVT at 200 microns per coat
Mixing/Application
Mix the entire contents of the base with the hardener. If a separate mixing bucket is being used mix thoroughly ensuring all contents of both components are removed from the buckets supplied. Mix using a high-speed electric mixer (for colours) or a slow-speed electric mixer (for clear) for approximately three to four minutes until the two components are fully combined.
The mixed unit should be applied immediately by roller, brush or squeegee with a consistent procedure. Floor areas should be cross rolled to ensure even application and to minimise roller marks. It is important to maintain a wet edge with this product to minimise the risk of roller marks in the cured finish.
Application Conditions
The ambient temperatures of the areas should not be allowed to fall below 15°C throughout the application and the curing period, as this could have an adverse effect on the appearance and colour of the system. Surface temperature must be above 10°C. Where possible it is recommended that the application area is heated to a minimum temperature of 15°C ideally to allow the ambient and substrate temperature to stabilise prior to the installation.
NOTE: Applied coating should be protected from moisture during application and during the curing period. Exposure to moisture during this time can cause surface and colour variations.
Product Details
10139-975060
Data sheet
- Manufacturer
- RSL
- For Use By
- Industrial Use
- Interior / Exterior Use
- Interior Use
- For Use On
- Concrete
Wood
Masonry Surfaces - Application Method
- Roller
Brush
Squeegee - Sheen
- Gloss
Matt - Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 6.6KG
26.4KG - Application
- Roller
Brush
Squeegee - Coverage
- 6.60 kg will cover 50 m² @ 100 µm WFT
- Solids by Volume
- 56% by volume, colours will vary
- Recommended Dry Film Thickness
- 40 – 60 µm
- Recommended Wet Film Thickness
- 100 – 150 µm
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN1263
- Pot Life
- Up to 40 minutes from mixing, based on 6.60 kg pack size
- Solids by Weight
- 74% by weight
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Concrete Walls
- Suitable For Use On
- Metal Walls
- Suitable For Use On
- Metal Floors
- Finish
- Matt
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Squeegee
- Components
- 2K
- Usages
- Chemical Resistance
- Product Usage Type
- Topcoat
- Product Range
- Resutile
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Fire Rating
- Bfl-s1
- Chemical Resistance
- MIBK
- Chemical Resistance
- Methyl Ethyl Ketone
- Chemical Resistance
- Sodium Bisulfate
- Chemical Resistance
- Toluene
- Chemical Resistance
- Sodium Dihydrogenphosphate
- Chemical Resistance
- Xylene
- Chemical Resistance
- Sulfuric Acid
- Chemical Resistance
- Crude Oil
- Chemical Resistance
- Organic Durfactants
- Chemical Resistance
- Formaldehyde
- Chemical Resistance
- Dethyl Ether
- Chemical Resistance
- Kerosene
- Chemical Resistance
- Skydrol 500B-4
- Chemical Resistance
- Triethanolamine
- Chemical Resistance
- Skydrol LD4
- Chemical Resistance
- Benzene
- Chemical Resistance
- Hyjet Iv-A(Plus)
- Chemical Resistance
- Sodium Chloride
- Chemical Resistance
- N-Butylamine
- Chemical Resistance
- Hyjet HF
- Chemical Resistance
- Acetic Acid
- Chemical Resistance
- Petrol/Gasoline
- Chemical Resistance
- N,N-Dimethylaniline
- Chemical Resistance
- Potassium Chloride
- Chemical Resistance
- Aviation Fuel
- Chemical Resistance
- Acetone
- Chemical Resistance
- Diesel Fuel
- Chemical Resistance
- Ethanol
- Chemical Resistance
- Aromatic Hydrocarbons
- Chemical Resistance
- Ethyl Acetate
- Chemical Resistance
- Butanol
- Chemical Resistance
- Isopropanol
- Chemical Resistance
- Propanol
- Chemical Resistance
- Methanol
- Product Type
- Polyurethane
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
RSL Resutile ST is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
RSL Resuflor WB - Standard Readily Available Colours
A multi-purpose, two-pack, water-based epoxy coating in 13 colours primarily for concrete walls and floors. It can also be applied to concrete poured 7 days prior, as well as wood for a dust-free finish. These standard colours are readily available with faster shipping options; more colours are also available separately that are made to...
Price
£216.55
(incl. VAT)
In Stock and Available for Delivery
RSL Resuprime ST Bonding & Priming Coat
2-pack, solvent-free epoxy resin bonding and priming coat. It bonds resin-based screeds and toppings to cementitious and other surfaces. Versatile for many types of application. Excellent adhesive properties. Easy to apply. Can be used as a tack coat for screeds. No unpleasant or harmful odours. Formerly known as Resuprime.
Price
£143.12
(incl. VAT)
In Stock and Available for Delivery
RSL Resuflor Screed
Resuflor Screed (formerly known as Resuscreed 45) is a heavy duty, epoxy resin floor screed which uses a crystalline silica free aggregate, making it more environmentally friendly. Must seal for an impervious finish. Less dust than other screeds Low odour Hard wearing Abrasion and impact resistant Can form coving and falls Can be...
Price
£87.77
(incl. VAT)
In Stock and Available for Delivery
RSL Resuprime MVT
A faster curing version of R.S. Dampshield, with overcoat times of 6 hours. A two-component epoxy resin primer, it enables even earlier access onto new or existing concrete substrates for screed and coating applications on carpets, tiles, vinyl and wood. Easy application Use on substrates with hygrometer readings <97% Solvent-free...
Price
£177.56
(incl. VAT)
In Stock and Available for Delivery
RSL Resuflor Patch
RSL Resuflor Patch (Formerly known as Resuscreed PA and Resupatch) is a three-pack epoxy resin mortar designed for rapid concrete repair in heavy duty environments. Excellent mechanical properties Can be feather edged Abrasion and impact resistant Dust-free Concrete like in appearance Easy to apply Minimum surface preparation...
Price
£51.28
(incl. VAT)
In Stock and Available for Delivery