- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A polyurethane cement textured coating designed for application as an anti-slip floor finish onto concrete and FasTop flooring systems where required. The material uses current FasTop resin and hardeners to maintain flexibility in storage for the customer whilst also delivering the performance and properties that FasTop is known for. It can be applied by trowel and back rolled depending on the requirements and gives a hygienic textured finish that can be used for new screeds as well as refurbishing existing screeds and as coatings on concrete.
- High chemical resistance
- Textured anti-slip finish
- Resistant to hot water
- Hard wearing
- Hygienic
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Quick Links - Click To Jump To Section:
Recommended Uses
- Food manufacture and processing
- Brewing and beverage
- Pharmaceutical and chemical plant processing
- Heavy duty plant and traffic areas
- Dairies
- Commercial kitchens
- Abattoirs and meat processing
Surface Preparation
New Concrete Floors: New concrete must be clean, sound, dry, fully cured and surface laitance removed by vacuum enclosed shot blasting or mechanical grinding, a minimum strength of 25N/mm² is required.
Existing Concrete Floors: Remove all dirt, oil, grease, old paint or any other surface contaminants by vacuum enclosed shot blasting, scarifying or mechanical grinding. Fats, oils or greases must be removed by mechanical means and detergent washing and making sure all residue of detergent is washed and removed by rinsing with clean water. Local repairs should be carried out using FasTop BU.
Existing Floors (previously coated): All previous coatings and loose floor paints must be removed by mechanical preparation as described in the above section and primed as specified. If the old resin flooring cannot be removed then please consult with our technical team for advice on intercoat adhesion and suitability, as it may not be compatible with the existing floor coating.
Primer
Priming is not required but an optional application of FasTop Primer can be used on porous substrates.
For further information please refer to recommended individual product data sheets.
Mixing
Add the FasTop Multi Part A component (base) and then add the contents of the FasTop Multi Part D (color package) in a mixing bucket or directly in a rotary drum mixer, mix thoroughly for a minute then add the FasTop Multi Part B (hardener) component and mix for 1 minute.
Add component FasTop Multi T150 SR aggregate constantly, into the mixing bucket or into the mixer with rotating blades until a homogeneous mixture of the components is obtained.
FasTop Multi T150 SR should be applied immediately after mixing to prepared areas.
Application
FasTop Multi T150 SR may be applied to substrates with a surface temperature in the range of 5-20°C and a relative humidity of 40% - 90% RH, with a minimum air temperature of 8°C and no condensation. Do not pre-warm this product as working times will be substantially reduced if materials are warm.
NB: Cure times are extended at low temperatures.
FasTop T150 SR should be applied at the required rate as soon after mixing as possible. (Delay can result in variation in surface finish, colour and add to application problems).
The FasTop Multi T150 SR should be applied immediately by Trowel and then finished with a roller to create a consistent texture. Floor areas should be cross rolled to ensure even application and to minimise roller marks.
When applied to FasTop screeds and self-levelling systems as a seal coat the FasTop T150 SR should be worked rapidly and evenly over the area with a trowel and immediately back rolled at the coverage rates to create the required textured finish.
See Sherwin-Williams FasTop DP System Guide for recommended floor systems.
Product Details
10141-975119
Data sheet
- Manufacturer
- RSL
- For Use By
- Industrial Use
- Interior / Exterior Use
- Interior Use
- For Use On
- Concrete Floors
- Application Method
- Trowel
Roller - Sheen
- Matt
- Colour
- Standard / Ready Mixed
- VOC Levels
- 22 g/l
- Pack Size
- 18.3KG
- Dry to Recoat (at 20°C)
- 6 – 8 hours
- Coverage
- 18.3kg will cover approximately 13m2 at around 1mm thickness
- Max. Application Temperature
- 20°C
- Min. Application Temperature
- 5°C
- Layer Thickness
- 1.5 – 2.5 mm
- Dry for Light Traffic (at 20°C)
- 12 – 16 hours
- Dry for Full Traffic (at 20°C)
- 48 hours
- Pot Life
- 15 minutes from mixing
- Suitable For Use On
- Concrete Factory Floors
- Suitable For Use On
- New Concrete
- Suitable For Use On
- Food Manufacturing
- Suitable For Use On
- Concrete Brewery Floors
- Suitable For Use On
- Pharmaceutical Processing Plants
- Suitable For Use On
- Chemical Processing Plants
- Suitable For Use On
- Dairies
- Suitable For Use On
- Commercial Kitchens
- Suitable For Use On
- Concrete
- Suitable For Use On
- Kitchen Floors
- Suitable For Use On
- Floors
- Suitable For Use On
- Meat Processing Plants
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Factory Floors
- Suitable For Use On
- Breweries
- Suitable For Use On
- Beverage Industry
- Suitable For Use On
- Food Processing Plants
- Suitable For Use On
- New Concrete Floors
- Suitable For Use On
- Existing Concrete Floors
- Application Method
- Roller
- Application Method
- Trowel
- Components
- 4K
- Product Usage Type
- Anti-Slip
- Product Range
- FasTop Multi
- Full Chemical Resistance
- 5-7 days
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Orange
- Colour Family
- Yellow
- Colour Family
- Black
- Anti-Slip Texture
- Coarse Texture
- Product Type
- Polyurethane
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
RSL FasTop Multi T150 SR is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
RSL FasTop Multi WR
A cove and wall polyurethane resin render designed to be used with Resuthane™ floor screeds, maintaining the high levels of resilience to chemicals and hot temperatures. It is also suitable for radius coves. Seamless finish High chemical resistance Resistant to hot water & steam Matt finish Extremely hard wearing Formerly known as...
Price
£62.48
(incl. VAT)
In Stock and Available for Delivery
RSL FasTop Multi T150
3-pack polyurethane coating, that acts as the top coat when refinishing is necessary. When used with other Resuthane screeds, it ensures uniformity in concrete areas. Brush, roller or squeegee application High chemical resistance Resistance to hot water & steam Excellent slip resistant finish Matt finish Very hard wearing Formerly...
Price
£68.23
(incl. VAT)
In Stock and Available for Delivery
RSL FasTop Multi Bu
RSL FasTop Multi Bu (formerly known as Resufil) is a three component, granite reinforced polyurethane infill screed designed to fix holes or dents in a concrete subfloor, before overlaying occurs. It can also back-fill drainage waterways. Can be applied from 6mm to 60mm Can back-fill drainage channels Forms falls or ramps Fast curing...
Price
£63.86
(incl. VAT)
In Stock and Available for Delivery
RSL Resuprime ST Bonding & Priming Coat
2-pack, solvent-free epoxy resin bonding and priming coat. It bonds resin-based screeds and toppings to cementitious and other surfaces. Versatile for many types of application. Excellent adhesive properties. Easy to apply. Can be used as a tack coat for screeds. No unpleasant or harmful odours. Formerly known as Resuprime.
Price
£143.12
(incl. VAT)
In Stock and Available for Delivery
RSL Resuprime MVT
A faster curing version of R.S. Dampshield, with overcoat times of 6 hours. A two-component epoxy resin primer, it enables even earlier access onto new or existing concrete substrates for screed and coating applications on carpets, tiles, vinyl and wood. Easy application Use on substrates with hygrometer readings <97% Solvent-free...
Price
£177.56
(incl. VAT)
In Stock and Available for Delivery
RSL FasTop Multi Primer
FasTop Multi Primer is a water-based polyurethane cement primer designed for use with FasTop screeds and self-levelling systems. Uses current resin, hardener and aggregate to maintain flexibility Delivers the bonding performance and properties that FasTop is known for Can be applied by roller, brush or squeegee depending on the...
Price
£48.18
(incl. VAT)
In Stock and Available for Delivery