- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A polyurethane cement screed applied ‘wet on wet’ to a primer with a screed bar which is power trowelled to create a compact heavy duty flooring base screed between 5 - 150mm thickness which can then be finished with a Resuflor epoxy resin or FasTop polyurethane cement topping. The material uses current FasTop multi component resin and hardeners to maintain flexibility for the customer whilst also delivering the performance and properties that FasTop is known for.
- Can be power trowelled
- Applied from 5mm to 150mm
- Fast application and curing
- High strength
- Easy to install
- Suitable for FasTop and Resuflor toppings
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Product customisation
Don't forget to save your customization to be able to add to cartProfessional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Quick Links - Click To Jump To Section:
Recommended Uses
- Where smooth screeds are required
- Food manufacture and processing
- Pharmaceutical and chemical plant processing
Surface Preparation
New Concrete Floors: New concrete must be clean, sound, dry, fully cured and surface laitance removed by vacuum enclosed shot blasting or mechanical grinding, a minimum strength of 25 N/mm² is required.
Existing Concrete Floors: Remove all dirt, oil, grease, old paint or any other surface contaminants by vacuum enclosed shot blasting, scarifying or mechanical grinding. Fats, oils or greases must be removed by mechanical means and detergent washing and making sure all residue of detergent is washed and removed by rinsing with clean water. Local repairs should be carried out using FasTop Multi BU.
Existing Floors (previously coated): All previous coatings and loose floor paints must be removed by mechanical preparation as described in the above section and primed as specified. If the old resin flooring cannot be removed then please consult with our technical team for advice on intercoat adhesion and suitability, as it may not be compatible with the existing floor coating.
Anchor Joints: To ensure the maximum bond is achieved, grooves must be cut into the perimeter of the subfloor, typically 20 mm deep by 5-10 mm wide. These should be inset approximately 150 mm from and running parallel with the walls and adjacent to any doorways, plinths etc. including any finished edge, i.e. both sides of a day work joint. The groove must have a neat square edge and the FasTop Multi TR1000 laid to the full depth forming a perimeter anchorage.
Primer
To achieve the best adhesion to substrates FasTop TR1000 must be applied onto wet primer. Resuprime ST can be used on dry substrates with less than 75% ERH reading.
Where the Relative Humidity of a substrate exceeds 75% ERH Resuprime MVT should be specified and selected on the basis of hygrometer readings in accordance with BS 8203. Please refer to the table below for required number of coats to achieve proper moisture tolerance.
ERH% Required Coating Thickness
- 75-85 1 coat of Resuprime MVT at 200 µm per coat
- 85-92 2 coats of Resuprime MVT at 200 µm per coat
- 92-97 3 coats of Resuprime MVT at 200 µm per coat
For further information please refer to recommended individual product data sheets.
Mixing
Add the FasTop Multi Base Part A half size pouch and then the FasTop Multi Colour Pack pouch contents into a mixing bucket or directly into a rotary drum mixer, mix thoroughly for one minute then add the FasTop Multi Hardener Part B half size pouch and mix for approximately one minute. If a separate bucket has been used pour the combined mix into a rotary drum mixer and add the FasTop TR1000 Aggregate component steadily, until a homogeneous mix of the three components is achieved.
FasTop TR1000 should be applied immediately after mixing to prepared and primed areas whilst the primer is still tacky.
Application
FasTop Multi TR1000 may be applied to substrates with a surface temperature in the range of 5-20°C and a relative humidity of 40% to 90% RH, with a minimum air temperature of 8°C and no condensation. Do not pre-warm this product as working times will be substantially reduced if materials are warm.
NB: Cure times are extended at low temperatures.
Whilst the epoxy primer used is still tacky, FasTop Multi TR1000 should be applied at the required rate as soon after mixing as possible using a screed bar and then be finished with a power trowel to create a compact even finish. (Delay can result in variation in surface finish, colour and add to application problems).
After a minimum of 8 hours FasTop Multi TR1000 should be grouted with FasTop Multi T150 and then Resuflor and FasTop products can be applied to the required depth and finish.
Data sheet
- Manufacturer
- RSL
- For Use By
- Industrial Use
- Interior / Exterior Use
- Interior Use
- For Use On
- Concrete Floors
- Application Method
- Screedbar
Trowel - Sheen
- Matt
- Colour
- Standard / Ready Mixed
- VOC Levels
- 9 g/l calculated per full mixed unit
- Single, Two or Three Pack
- Four-Pack
- Pack Size
- 27.72KG
- Dry to Recoat (at 20°C)
- 6 – 8 hours
- Coverage
- 27.72kg will cover 1.3m2 @ 10mm thickness – 21 kg/m2
- Max. Application Temperature
- 20°C
- Min. Application Temperature
- 5°C
- Layer Thickness
- 5 - 100mm (hand trowel application)
5 - 150mm (power trowel application) - Dry for Light Traffic (at 20°C)
- 6 - 8 hours
- Dry for Full Traffic (at 20°C)
- 48 hours
- Pot Life
- 15 minutes from mixing
- Base Type
- Solvent-Free
- Base Type
- Polyurethane
- Suitable For Use On
- Anchor Joints
- Suitable For Use On
- Concrete
- Suitable For Use On
- Floors
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Factory Floors
- Suitable For Use On
- Food Processing Plants
- Suitable For Use On
- Concrete Factory Floors
- Suitable For Use On
- Food Manufacturing
- Suitable For Use On
- Pharmaceutical Processing Plants
- Suitable For Use On
- Chemical Processing Plants
- Application Method
- Trowel
- Application Method
- Screedbar
- Product Usage Type
- Floor Screed
- Product Range
- FasTop Multi
- Full Chemical Resistance
- 3-5 days
- Colour Family
- Cream
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Orange
- Colour Family
- Black
- Colour Family
- Magnolia
- Colour Family
- Gold
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
RSL FasTop Multi TR1000 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
RSL FasTop Multi WR
A cove and wall polyurethane resin render designed to be used with Resuthane™ floor screeds, maintaining the high levels of resilience to chemicals and hot temperatures. It is also suitable for radius coves. Seamless finish High chemical resistance Resistant to hot water & steam Matt finish Extremely hard wearing Formerly known as...
RSL FasTop Multi T150
3-pack polyurethane coating, that acts as the top coat when refinishing is necessary. When used with other Resuthane screeds, it ensures uniformity in concrete areas. Brush, roller or squeegee application High chemical resistance Resistance to hot water & steam Excellent slip resistant finish Matt finish Very hard wearing Formerly...
RSL FasTop Multi Bu
RSL FasTop Multi Bu (formerly known as Resufil) is a three component, granite reinforced polyurethane infill screed designed to fix holes or dents in a concrete subfloor, before overlaying occurs. It can also back-fill drainage waterways. Can be applied from 6mm to 60mm Can back-fill drainage channels Forms falls or ramps Fast curing...
RSL Resuprime ST Bonding & Priming Coat
2-pack, solvent-free epoxy resin bonding and priming coat. It bonds resin-based screeds and toppings to cementitious and other surfaces. Versatile for many types of application. Excellent adhesive properties. Easy to apply. Can be used as a tack coat for screeds. No unpleasant or harmful odours. Formerly known as Resuprime.
RSL Resuprime MVT
A faster curing version of R.S. Dampshield, with overcoat times of 6 hours. A two-component epoxy resin primer, it enables even earlier access onto new or existing concrete substrates for screed and coating applications on carpets, tiles, vinyl and wood. Easy application Use on substrates with hygrometer readings <97% Solvent-free...
RSL FasTop Multi Primer
FasTop Multi Primer is a water-based polyurethane cement primer designed for use with FasTop screeds and self-levelling systems. Uses current resin, hardener and aggregate to maintain flexibility Delivers the bonding performance and properties that FasTop is known for Can be applied by roller, brush or squeegee depending on the...