- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Water-borne base stain for application by flow coating, vacuum coating, dipping and brushing. Suitable as a low build base stain for all exterior timber substrates.
- Base coat for Ankolux Translucent Topcoat
- Exceptional penetration and adhesion
- Adds protective pigmentation to the Ankolux translucent system
- Good flow and run-off
- Based on Alkyd-Emulsion binder technology
- Fast-Drying
- Good UV protection
- Translucent appearance accentuating the woodgrain
- For industrial use only
Quick Links - Click To Jump To Section:
Translucent Coating Swatches
Substrate and Preparation
Suitable for all commonly used timber species. Timber moisture content should be between 12 and 16%. The substrate must be clean, dry and free from dust, dirt, grease, silicone and wax.
Follow the appropriate Anker Stuy coating specification for other system products such as primers and end grain sealers.
Application Conditions
During application and for at least 10 minutes afterwards we advise a temperature between 15 and 20⁰C and a relative humidity of 60-70%. Do not apply below 8°C ambient and surface temperature and a relative humidity above 85%.
Equipment Settings
Flow coating, dip tank, vacuum coater, saturation spray.
Product can be fully immersed in a dip tank or flood coated by flow coater, vacuum coater or saturation spray. Viscosity of product should be regulated to approximately 11 seconds Din Cup 4.
Spray using air-assisted airless equipment at low fluid pressure with air assistance turned off to avoid atomising product.
Ensure items are heavily saturated with product and when saturate (deluge) spraying work from the bottom of the item to the top ensuring all surfaces are drenched with product.
If brushing apply liberally by brush and remove runs quickly with a brush.
Data sheet
- Manufacturer
- Anker Stuy
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- Wood
- Application Method
- Flow coating
Dip tank
Vacuum coater
Saturation spray - Sheen
- Matt
- Single, Two or Three Pack
- Single
- Pack Size
- 2.5L
20L - Coverage
- Dependent on the absorption of timber and the way the timber is sawn.
Fine sawn: 7-11 m2/ltr
Smooth planed – 11-14 m2/ltr - Recommended Thinner/Cleaner
- Thin with clean water. Clean tools with warm water.
- Min. Application Temperature
- 15°C
- Dry to Recoat
- 4 hours
- Colour(s)
- Standard Colours
- Base Type
- Water-Based
- Suitable For Use On
- Wood
- Suitable For Use On
- Doors
- Suitable For Use On
- Windows
- Suitable For Use On
- Windowsills
- Finish
- Matt
- Application Method
- Dip
- Application Method
- Flow
- Application Method
- Vacuum
- Application Method
- Flow coating
- Application Method
- Spray
- Manufacturer
- Anker Stuy
- Product Usage Type
- Primer
- Product Range
- Ankolux
- Dust Dry
- 1 hour
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Yellow
- Colour Family
- Black
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Anker Stuy Ankolux Base Stain is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT