- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- High quality 1K elastic glue.
- For bonding corner joints with double dowel and double pin and hole connections.
- 1-sided application stripe-wise
- Waterproof.
- No press time.
- No foaming, no shrinkage.
- 100% filling and sealing.
More Features & Benefits
- Certified in combination with these types of wood: Meranti, Merbau, Sapupira , Sapeli mahogany, Iroko, Oregon Pine, Pine/Redwood and Accoya
- Immediate and good paintability.
- No irritation, no isocyanides.
Application
The surface should be dry and free from dust and grease. Apply Window Frames Adhesive 0819 SLS stripe wise, directly from the cartridge or tin. During closing of the work piece, the adhesive is evenly distributed over the surface. When gluing particular attention should be paid to the amount of adhesive applied. After closing of the joint a small excess of adhesive should be pressed outwards at all sides so that a 100% tight connection is formed.
It is recommended to apply the adhesive on a flat section before you insert any dowels. Provide the dowel holes of sufficient adhesive so that the adhesive is driven upwards along the dowels.
Within 20 minutes after the application of the adhesive the joint should be closed. The minimum pressure that is required to press the different pieces together is sufficient to make a good connection. Make sure that the press pressure is not higher than necessary in order to close the connection so that there is not too much adhesive pressed out of the joint. After pressing, release pressure evenly. Immediately after closing the work piece the pressure can be released.
Note that the work piece is initially loaded as little as possible, the connection can be loaded after about 6 hours. If the connections have sufficient mechanical strength (such as pin and hole, swish or screwed), they can be immediately loaded after bonding. Adhesive stains or waste on the frame can be removed with a putty knife and Frencken Remove Wipes.
Data sheet
- Manufacturer
- Anker Stuy
- For Use By
- Professional Use
- For Use By
- Industrial Use
- For Use On
- Wood
- Application Method
- Spatula
Filling knife - Single, Two or Three Pack
- Single
- Pack Size
- 900ml
- Max. Application Temperature
- 35⁰C
- Min. Application Temperature
- 10⁰C
- Heat Resistance (up-to)
- -40 °C to + 70 °C
- Open time
- approx. 25 min.
- Base Type
- Water-Based
- Suitable For Use On
- Wood
- Suitable For Use On
- Window Frames
- Application Method
- Spatula
- Application Method
- Filling Knife
- Manufacturer
- Anker Stuy
- Usages
- Wood
- Product Usage Type
- Adhesive
- Cure Rate
- approx. 1mm after 24 hours
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Anker Stuy Frencken 0819 SLS Window Frame Adhesive is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT