- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Pick from 140+ brown shades - including this year's trending browns - in this quick-drying matt finish primer/finish coat in one can, for use as a low odour, quick drying scuff and moisture resistant, adhesion promoting, stain locking, anticorrosive coating for interior or exterior walls and trim, masonry (Brickwork/Concrete etc) ferrous metals, non-ferrous metals, common plastics (e.g. melamine and uPVC), ceramic tiles, glass, wood and existing painted surfaces.
- Also available in 2,500+ colours, inc. RAL Classic, BS, NCS & the new NCS 2050 colours
- Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004
Please note: Matt finish products can be more susceptible to scuffs, watermarks, dirt, etc. so in areas of frequent contact/use such as windows, doors, roller shutters etc. an alternative finish may be more suited (such as Bradite One Can Eggshell). Please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for further advice if in doubt.
Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Please always refer to the downloadable PDF`s from the "Data Sheets" tab for more information on:
- Technical Data
- Suitable Surfaces and Substrates
- Substrate Preparation
- Application Instructions
- Suitable Primers/Topcoats (where applicable)
- Drying Times
- Application Equipment
- Health & Safety Information
- Warranty
Product Details
5773-1036677
Data sheet
- For Use By
- Consumer Use
- For Use On
- Wood, Metal, uPVC, Masonry, Glass, Aluminium, Stainless Steel, Galvanised Steel, Copper
- Sheen
- Matt
- VOC Levels
- Ultra-Low (5-49 g/l)
- Single, Two or Three Pack
- Single
- Pack Size
- 1L, 2.5L, 5L
- Application
- Brush, Roller, Spray
- Coverage
- 12m2 per Litre
- Recommended Thinner/Cleaner
- Water
- Min. Application Temperature
- 7°C
- Min. Application Temperature
- 10°C
- Min. Application Temperature
- 7°C or above for application (minimum of 3°C above dew point)
- Density
- 1.34 kg/L
- Solids by Volume
- 41.3%
- VOC
- 25 g/l
- Shelf Life (from date of manufacture)
- 2 Years
- Touch Dry
- 30 Mins
- Recommended Dry Film Thickness
- 40 microns/coat
- Recommended Wet Film Thickness
- 100 microns/coat
- UN Number
- UN3082
- Dry to Recoat
- 1 Hour (Drying times will be prolonged at lower temperatures)
- Fully Cured
- 7 days
- Flashpoint
- Non-Flammable
- Colour(s)
- Fully Tintable
- Base Type
- Water-Based
- Suitable For Use On
- Plastic
- Suitable For Use On
- Ferrous Metals
- Suitable For Use On
- Wood
- Suitable For Use On
- Walls
- Suitable For Use On
- Masonry
- Suitable For Use On
- Melamine Surfaces
- Suitable For Use On
- Concrete
- Suitable For Use On
- Plastisol
- Suitable For Use On
- Brick
- Suitable For Use On
- Non-Ferrous Metals
- Suitable For Use On
- Glass
- Suitable For Use On
- UPVC
- Suitable For Use On
- Interior Trim / Skirting
- Suitable For Use On
- Cladding
- Suitable For Use On
- Ceramic Tile
- Finish
- Matt
- Application Method
- Roller
- Application Method
- Brush
- Application Method
- Spray
- Manufacturer
- Bradite
- Fastest Delivery
- Next Working Day
- Type of Wood Finish
- Wood Paint
- Suitable For
- Walls & Ceilings
- Colour Family
- Magnolia
- Colour Family
- Brown
 Sarah Jones on 2024-03-04 23:18:39 | Question:
Hi, can you paint laminate floor with this please? |
Answer from Rawlins’ Technical Team:
Unfortunately no, we also do not have an alternative we can recommend for this application. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Bradite One Can Matt - Shades of Brown is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Price
£12.08
(incl. VAT)
In Stock and Available for Delivery
Bradite One Can Eggshell
2,500+ Colours. Quick-drying, low-odour, water-thinned primer and finish coat. Excellent adhesion, stain-blocking, and anti-corrosive properties. For ferrous and non-ferrous metals, plastics, ceramic tiles, glass, wood, and existing painted surfaces. Weather and light resistant. Please note: Colours are sold in the nearest tin size...
Price
£33.14
(incl. VAT)
In Stock and Available for Delivery
Bradite Industrial Degreaser
Low-foaming, aqueous pink alkaline detergent designed for degreasing contaminated surfaces. Ideal for oily or soiled surfaces, especially for removing road dirt. Cleans thoroughly prior to painting.
Price
£67.94
(incl. VAT)
In Stock and Available for Delivery
Bradite Fastrac Rust Converter
Bradite Fastrac Rust Converter is a high performance, single-pack, water-based rust converter intended for the treatment and passivation of surface rust on all hand or mechanically prepared rusty ferrous surfaces. Especially suited for objects which may be difficult to sand blast such as; fences, iron railings, guttering and outdoor...
Price
£45.36
(incl. VAT)
In Stock and Available for Delivery
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£25.93
(incl. VAT)
In Stock and Available for Delivery