- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- 2,500+ colours.
- Two-pack water-based anti-slip floor coating.
- Ideal for heavily trafficked wood, concrete, masonry, asphalt, and tarmac.
- Off-gloss, aggregated finish.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Coo-Var ProGrip Heavy Duty Two-Pack Anti-Slip Floor Paint
This two-pack anti-slip floor coating is formulated to deliver exceptional durability and slip resistance. Its water-based composition makes it a safer alternative for both indoor and outdoor use, providing robust protection for high-traffic areas. The product is designed to withstand the wear and tear caused by foot traffic, trucks, vans, and forklifts, making it perfect for commercial, industrial, and heavy-duty environments.
Application Areas
Suitable for use on a wide variety of surfaces including wood, concrete, masonry, asphalt, and tarmac. It can also be applied over stable existing coatings, provided the surface is properly prepared. This makes it an ideal solution for refurbishing old floors as well as finishing new surfaces. For the best results, ensure the surface is clean, dry, and free from contaminants before application.
- Concrete and masonry floors
- Industrial and commercial wood surfaces
- Asphalt and tarmac pathways
Application Guidelines
Before using the product, ensure the surface is well-prepared. For concrete, power-floated or smooth surfaces should be roughened to provide an adequate key. The product should be applied with a brush or short-pile roller. Ensure temperatures are above 10°C during application and curing. Mix Part A and Part B as per the instructions and add 250ml of clean water to each 5kg pack.
- Recoat interval: 16 hours minimum
- Full cure time: 5-7 days
Do not apply at temperatures below 10°C or in high humidity conditions, as this can affect the drying and curing process.
Limitations
This product is not recommended for metal surfaces unless a suitable primer, such as the Teamac High Performance Zinc Phosphate Primer, is applied first. Avoid using on surfaces prone to frequent chemical exposure or where heavy moisture is present. It should not be diluted beyond the recommended 250ml of water per 5kg pack.
Additional Recommendations
For surfaces requiring extra durability or protection, consider using the Coo-Var High Performance Primer as an undercoat. This will enhance adhesion, especially on polished or porous surfaces. For surfaces exposed to chemicals or extreme weather conditions, consult the Coo-Var Technical Services team for advice on alternative solutions.
Health and Safety
- UN Number: 3082 (Black, White, Yellow, Red)
The product contains substances that can cause skin irritation and serious eye damage (H315, H319). Wear protective clothing, gloves, and eye protection during use. In case of contact with eyes, rinse immediately with water and seek medical advice. Avoid releasing the product into the environment, as it may harm aquatic life (H412).
Product Details
10345-981765
Data sheet
- Manufacturer
- Coo-Var
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Wood
- For Use On
- Concrete
- For Use On
- Floors
- For Use On
- Concrete Floors
- For Use On
- Asphalt surfaces
- For Use On
- Masonry
- Application Method
- Brush, Roller
- Sheen
- Gloss
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5KG
- Fully Cured (at 20°C)
- 5-7 days @ 20c
- Pot Life (at 20°C)
- 2-4 hours
- Coverage
- 6 - 10m2/KG
- Recommended Thinner/Cleaner
- Water
- Solids by Volume
- 55-85%
- VOC
- Below 10g/litre
- Recommended Dry Film Thickness
- 35-70 microns
- Recommended Wet Film Thickness
- 100 microns
- Dry to Recoat
- 72 hours
- Specific Gravity
- 1.23 @ 20c
- Hard Dry
- 8-12 hours @ 20c
- Initial Cure
- 4 hours @ 20c
- Colour(s)
- Standard Colours
- Base Type
- Water-Based
- Suitable For Use On
- Vehicular-Trafficked Floors
- Suitable For Use On
- Masonry
- Suitable For Use On
- Concrete
- Suitable For Use On
- Wood
- Suitable For Use On
- Wooden Floors
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Tarmac
- Suitable For Use On
- Asphalt
- Suitable For Use On
- Masonry Floors
- Suitable For Use On
- Asphalt Floors
- Suitable For Use On
- Wood Floors
- Suitable For Use On
- Tarmac Floors
- Suitable For Use On
- Forklift-Trafficked Floors
- Finish
- Gloss
- Finish
- Textured Gloss
- Application Method
- Brush
- Application Method
- Roller
- Manufacturer
- Coo-Var
- Usages
- Anti-Slip
- Product Usage Type
- Topcoat
- Product Range
- ProGrip
- Minimum Overcoating Time
- 16 hours
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Stone
- Colour Family
- Anthracite Grey
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Coo-Var ProGrip Heavy Duty Two-Pack Anti-Slip Floor Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT