- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Water-borne translucent wood-stain for exterior and interior use. Recommended for use as a weather resisting, translucent low-film building wood-stain for dimensionally non-stable wood components, or as a penetrating first coat followed by 16-0221 Ankolux Woodcoat TP.
- Very good penetration into wood
- High resistance to UV radiation
- Good adhesion on bare wood
- Low-film build
- 3 coats required (1 as basestain)
- For professional use
Quick Links - Click To Jump To Section:
Features & Benefits
- For exterior and interior use
- Dust dry in approx. 1 hour
- Recoatable in approx. 4 hours
- Drying requires good air movement and removal of humid air from confined spaces
Translucent Coating Swatches
Note: Colours on screen can differ from the original colour.
Substrate Preparation
Suitable for all commonly used timber species. Timber moisture content should be between 12 and 16%.
The substrate must be clean, dry and free from dust, dirt, grease, silicone and wax. Follow the appropriate Anker Stuy Coating specification for other system products such as top coats and end grain sealers.
Application
Ready for use - stir well before use
Application methods:
- Saturation spray
- Spray (cup) for horizontal treatment
- Dipping
- Vacuum coater
- Flow coat
Theoretical spreading rate
Dependent of the open-wood structure:
- Fine sawn: 7-11 m2/ltr
- Smooth sawn: 11-14 m2/ltr
Data sheet
- Manufacturer
- Anker Stuy
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Wood
- Application Method
- Saturation spray
Spray (cup) for horizontal treatment
Dipping
Vacuum coater
Flow coat - Sheen
- Matt
- Single, Two or Three Pack
- Single
- Pack Size
- 2.5L
20L - Coverage
- Dependent of the open-wood structure
Fine sawn: 7-11 m²/ltr
Smooth sawn: 11-14 m²/ltr - Recommended Thinner/Cleaner
- Undiluted
Clean tools and equipment with warm water - Density
- 1.01kg/l
- Solids by Volume
- 15%
- Finish
- Matt
- Dry to Recoat
- 4 Hours
- Viscosity
- 20-25 Seconds DIN cup 3 at 20°C
- Colour(s)
- Standard Colours
- Base Type
- Water-Based
- Suitable For Use On
- Wood
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Spray
- Application Method
- Dip
- Manufacturer
- Anker Stuy
- Product Usage Type
- Stain
- Product Range
- Ankolux
- Type of Wood Finish
- Wood Stain
- Dust Dry
- approx. 1 hour
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Orange
- Colour Family
- Yellow
- Colour Family
- Black
Questions
Question about the product
Viv moyce on 2023-10-24 22:14:08 | Question:
Do you send out samples |
Answer from Rawlins’ Technical Team:
This product is only available in the sizes listed on our website, the smallest being 2.5L. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Anker Stuy Ankolux Aqua Impregnating Woodstain is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT