Follow us on:

Resin Technologies Antibacterial Epoxy Floor Paint | Anti-Slip Options
Resin Technologies Antibacterial Epoxy Floor Paint | Anti-Slip Options
Resin Technologies Antibacterial Epoxy Floor Paint | Anti-Slip Options
Resin Technologies Antibacterial Epoxy Floor Paint | Anti-Slip Options
Resin Technologies Antibacterial Epoxy Floor Paint | Anti-Slip Options

Resin Technologies Antibacterial Epoxy Floor Paint

RT003/RT003AS
RES10404
  • Heavy-duty epoxy resin coating system, ideal for coating highly trafficked areas where antibacterial properties are of paramount importance.
  • Available in a range of anti-slip grades from none to coarse* and is ideally suited for areas subject to wet conditions such as kitchens, dispatch areas, kennels and pool areas. High durability and slip resistant options make this the perfect paint for industrial use.
  • Two coats on most surfaces will produce a professional gloss finish. Texturing alters depending on Anti-Slip grade.
  • Typical uses include hospitals, dentist surgeries, doctors' surgeries, schools, pharmaceutical industry and other hygiene control areas.
  • High strength 2 coat system.
  • ≥99.9% Kill Rate of Bacteria.
  • Anti-microbial - Easy to Clean & Maintain.
  • 100% Solvent Free.
  • Suitable for interior use - Surface Usable in 24 hours.
  • For use on suitably prepared Concrete, Steel and other substrates.
  • Tested by Bio-master - certificate available upon request.

*Aggregate is provided separately for the Coarse Anti-Slip option. Medium and Fine Anti-Slip is pre-mixed into the Part A Tin

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
    Your customization:
Colour Group
Size
Finish
Anti-Slip
£72.48(incl. VAT)
£60.40(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

Resin Technologies Antibacterial Epoxy Floor Paint is an antimicrobial floor paint which offers effective and trusted antibacterial protection ensuring your flooring remains hygienic at all times. With the added anti-slip profile this coating is great for areas such as factories, hospitals, doctors' surgeries and anywhere else that requires protection. Independently tested by Bio-Master - certificate available upon request.

An antibacterial coating specifically prevents the growth of bacteria whilst the antimicrobial coating goes further than this, destroying bacteria as well as a wide range of microbes such as fungi and mould. The coating is also resistant to antibiotic–resistant bacteria such as MRSA.

Resin Technologies Antibacterial Epoxy Floor Paint is supplied in two pack sizes: 2.5kg and 5kg. Each unit is split between PART A and PART B (PART C* - aggregate is an optional component if a Coarse anti-slip profile is chosen from the menu above). Weight measurements are for the whole unit.

*Aggregate is only provided separately for the Coarse Anti-Slip option. For Medium and Fine Anti-Slip aggregate is pre-mixed in the blend already making the product a 2-part system 

Please note Gloss levels for this product are dependent on the anti-slip grade selected.



Quick Links - Click To Jump To Section:




Features & Benefits


  • ≥99.9% Kill Rate of Bacteria
  • Independently tested by Bio-master - certificate available upon request
  • Surface Usable in 24hrs
  • Superb coverage rates (4sqm/kg)
  • Solvent Free
  • Optional Anti-Slip available in Fine (0.4mm), Medium (0.8mm) or Coarse (2mm) Aggregate Sizes



How Does Resin Technologies Antimicrobial Floor Paint Kill Bacteria?


The below diagram demonstrates how the antibacterial technology prevents the growth of bacteria on a floor coated with Resin Technologies Antibacterial Epoxy Floor Paint.





Typical Properties


Technical Data
Pot life @ 20°C: 20 Minutes
Working life 40 Minutes
Thickness 250 Microns/Coat
Consumption rate 0.25-0.30kg/m²
Coverage Up to 4m²/kg
Shelf life 12 Months
Components 2/3 Part System - Resin, Activator, Aggregate* 
Recommended coats Two coats
Application tools Brush, Roller
Usage location Interior
Storage Temperature 10 - 25 °C

*Note - Aggregate will only be provided separately for Coarse option, medium and fine are pre-mixed into PART A tin



Curing


Cure Times
Recoat Time @10°C: 16-24 Hours
Recoat Time @20°C: 8-12 Hours
Car Traffic Time @10°C: 24-48 Hours
Car Traffic Time @20°C: 12-24 Hours
Industrial Traffic Time @10°C: 72 Hours
Industrial Traffic Time @20°C: 48 Hours
Full Chemical Cure Time @20°C: 7 Days



Mixing


  • Gently stir PART A for 2 minutes to ensure dispersal of pigment
  • Once stirred, pour 100% contents of PART B into the PART A tin and thoroughly mix by mechanical means (a paddle on the end of a drill) for 90 seconds, or until a uniform colour and texture is achieved and the curing agent has fully dispersed
  • Please note that after mixing both components, 100% of the material must be used in a single application and cannot be stored for later use as chemical curing will occur
  • For PART C instructions (Coarse Anti-Slip), see 'Application'.



Surface Preparation


  • Ensure that the concrete is clean and free from dust, laitance, oil etc.
  • Defective concrete should be made good using a repair mortar such as Resin Technologies All In One Repair Mortar
  • A relevant Primer should be used such as Resin Technologies All Purpose Primer
  • Suitable mechanical treatment is the preferred treatment prior to application, such as using a surface grinder, as this ensures a mechanical “key” for the coating
  • However, in instances where this is not feasible, acid etching can also be used for this purpose. Please see Resin Technologies Etch & Clean

Please Note: For substrates other than Concrete, such as Steel and other surfaces, please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] to check suitability and surface preparation/application advice.



Application


  • The mixed unit must be applied immediately and with a consistent, thorough coating method
  • Apply with a suitable roller, whilst a second pair of hands cuts in the edges of the space
  • Flat areas should be cross-rolled ensuring an even and smooth finish throughout
  • Move down the floor and repeat the process until complete
  • If coating a large area, you may require multiple work-persons
  • IF USING COARSE ANTI-SLIP paint will be aggregate free. Aggregate must be added manually, typically by scattering by hand it onto a still-wet first coat of Resin Technologies Antibacterial Anti-Slip Floor Paint and then back-rolling the paint
  • A typical system would be 1 coat of relevant Primer and 2 coats of Resin Technologies Antibacterial Epoxy Floor Paint
  • In this case after the primer has been applied, the first coat of Resin Technologies Antibacterial Epoxy Floor Paint should be applied no longer than 24 hours after the primer has cured or is dry to touch
  • Similarly, the 2nd coat of Resin Technologies Antibacterial Epoxy Floor Paint should be applied no longer than 24 hours after the first coat of paint has cured
  • Please note the pot life for this product is 20 minutes, the paint will be unworkable due to chemical curing after this time, ensure you remove the paint from the tin during this window
  • The paint will be workable on your floor for 40 minutes
  • For more information please see the Data Sheets in the 'Data Sheets' tab, or please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]

Please see the relevant product Data Sheet for the product to be used in the 'Datasheets' Tab above.



Limitations


  • Do not apply on New or Wet Concrete (under 28 days old with residual moisture content of or higher 6%)
  • Do not apply below 7°C
  • Temperatures below 20°C will negatively impact curing/drying times
  • Do not expose to freezing conditions
  • Do not expose to chemicals, wash or allow water to rest on surface until 7 days after application
  • Do not expose to prolonged sunlight as this product is not UV Stable and will discolour
  • Concrete is required to possess a Damp Proof Membrane beneath it in order for Epoxy Coatings to be applied



Health & Safety


  • Wear appropriate PPE. I.E Gloves and protective safety goggles
  • If in contact with skin wash off immediately with plenty of soap and water. If discomfort occurs seek medical advice
  • This product should be applied strictly in accordance with manufacturer’s instructions
  • Always refer to the Material Safety Data Sheet before handling or mixing this product

Please see the relevant product Data Sheet for the product to be used in the 'Datasheets' Tab above for specific details.



Product Details
10404-984185

Data sheet

Manufacturer
Resin Technologies
For Use By
Consumer Use
Interior / Exterior Use
Interior Use
For Use On
Concrete
Steel
Application Method
Roller
Brush
Sheen
Gloss
Pack Size
2.5KG
5KG
Dry to Recoat (at 20°C)
8-12 Hours
Pot Life (at 20°C)
20 minutes
Coverage
4m² per kg
Min. Application Temperature
7°C
UN Number (Activator)
N/A
UN Number (Base)
UN3082
Dry for Light Traffic (at 20°C)
12-24 Hours
Dry for Full Traffic (at 20°C)
48 Hours
Colour(s)
Standard Colours
Base Type
Solvent Free
Suitable For Use On
Concrete
Suitable For Use On
Steel
Suitable For Use On
Floors
Suitable For Use On
Pool Surrounds
Suitable For Use On
School Floors
Suitable For Use On
Hospital Floors
Suitable For Use On
Kitchen Floors
Finish
Gloss
Application Method
Brush
Application Method
Roller
Manufacturer
Resin Technologies
Components
2K
Components
3K
Usages
Floor Coatings
Product Usage Type
Topcoat
Full Chemical Resistance
7 Days
Colour Family
Grey
Colour Family
Blue
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

Resin Technologies Antibacterial Epoxy Floor Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


COVERAGE CALCULATOR
Units
Total area²
Or enter length and width dimensions:
Length
Width

*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage. Two coats are recommended for this product

You might also like
Resin Technologies All Purpose Primer |  Solvent free

Resin Technologies All Purpose Primer

A versatile, durable Epoxy primer for use on concrete floors and for most other substrates. Offering excellent adhesion, it forms a strong foundation for which subsequent coats can be applied. It can be used either as a single-coat which seals and protects against moisture or, alternatively, when two coats are applied this system can even act...

Price £56.17 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Resin Technologies Etch & Clean Solution | Concrete Preparation

Resin Technologies Etch & Clean

The easy way to prepare a concrete floor or surface before beginning a paint or resurfacing project. Premier cleaning formula for preparing and cleaning concrete before applying epoxy paints or resurfacing products. The formula will change colour from a clear solution to a yellow colour to indicate neutralisation and allow you to maximise the...

Price £32.62 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Resin Technologies All In One Repair Mortar | Concrete Patch Repair

Resin Technologies All In One Repair Mortar

A three-part heavy duty patch material for repairing concrete. With a finish harder than concrete itself and extreme long-life durability this product is ideal for almost any concrete patch or repair job, on roads, in pot holes or even in industrial workspaces. All In One Repair Mortar offers a concrete-like smooth finish in a natural...

Price £54.36 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery