Follow us on:

Resin Technologies Penny Floor Resin | For Coin Cast Flooring Designs
Resin Technologies Penny Floor Resin | For Coin Cast Flooring Designs
Resin Technologies Penny Floor Resin | For Coin Cast Flooring Designs

Resin Technologies Penny Floor Paint

RT009
RES10410

A clear, heavy duty, high build epoxy resin ideal for creating coin cast flooring or penny floor designs. The epoxy resin will set completely clear with a smooth, attractive finish that brings out the colour and vibrancy of whatever it is cast on top of. The formula is designed to provide good abrasion resistance and can withstand heavy traffic.

This product can be applied over cast coins and other surfaces to give a unique smooth and see-through finish. Aside from being used as a clear, decorative resin, other typical uses may include table tops and for other DIY artwork where resin may be used to seal it.

  • Two-coat system
  • Perfect For “Coin Cast” DIY projects
  • Unique Professional Finish
  • Surface Usable in 24 hours
  • 100% Solvent Free
  • Extremely durable - Suitable for heavy traffic
  • Superb Coverage (up to 3m²/5kg)
  • For Interior Use
  • Ideal for smooth concrete floors
Colour
Size
Finish
£48.92(incl. VAT)
£40.77(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

Resin Technologies Penny Floor Paint is a high-quality epoxy penny floor system which allows you to get creative with your floor - offering a totally unique design. Use pennies, coins or similar to create a striking focal point. The coins can be positioned to create decorative patterns and designs ideal for any kitchen floor, bathroom floor or in any industrial or commercial setting.

Resin Technologies Penny Floor Paint is supplied in 2.5kg and 5kg pack sizes. Each unit is split between PART A and PART B. Weight measurements are for the whole unit.



Quick Links - Click To Jump To Section:




Features & Benefits


  • Unique professional finish
  • Incredibly durable
  • Surface Usable in 24hrs
  • Suitable for heavy traffic
  • 100% high quality epoxy
  • Easy to clean



Typical Properties


Technical Data
Pot life @ 20°C: 20 Minutes
Working life 40 Minutes
Thickness Up to 2mm depth
Coverage @1mm Up to 3m²/5kg
Shelf life 12 Months
Minimum Temperature 7°C
Components 2 Part System - Resin, Activator
Recommended coats Two coats
Application tools Brush, Roller, Squeegee
Usage location Interior
Storage Temperature 10 - 25 °C



Curing


Cure Times
Recoat Time @10°C: 16-24 Hours
Recoat Time @20°C: 8-12 Hours
Car Traffic Time @10°C: 24-48 Hours
Car Traffic Time @20°C: 12-24 Hours
Industrial Traffic Time @10°C: 72 Hours
Industrial Traffic Time @20°C: 48 Hours
Full Chemical Cure Time @20°C: 7 Days



Mixing


  • Pour 100% contents of PART B into the PART A tin and thoroughly mix by mechanical means (a paddle on the end of a drill) for 90 seconds, or until a uniform colour and texture is achieved and the curing agent has fully dispersed
  • Be advised: Mixing too fast will cause trapped air in the mixture, avoid this where possible
  • Please note that after mixing both components, 100% of the material must be used in a single application and cannot be stored for later use as chemical curing will occur



Surface Preparation


  • Ensure that the surface is clean and free from dust, oil and other contaminants
  • Defective concrete should be made good using a repair mortar such as Resin Technologies All In One Repair Mortar
  • A relevant Primer should be used such as Resin Technologies All Purpose Primer
  • Suitable mechanical treatment, such as using a surface grinder, is the preferred treatment prior to application, as this ensures a mechanical “key” for the coating
  • If this is not possible, then using a chemical etcher is a potential alternative
  • For additional substrates such as Wood please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for advice



Application


  • For coin preparation, ensure you have a smooth and level starting surface
  • Using a high strength flooring adhesive, proceed to glue your coins down in a desired pattern/layout
  • Once the adhesive has fully dried, clean the coins with a high strength cleaner
  • Use grout and a squeegee to cover all the pennies and push the grout into the gaps between the coins
  • Clear off the excess and leave to dry
  • Once the surface has fully dried you are ready to apply your Penny Floor Epoxy Paint
  • The mixed unit of Resin Technologies Penny Floor Paint must be applied immediately and with a consistent, thorough coating method
  • Apply with a suitable roller, whilst a second pair of hands cuts in the edges of the space
  • Flat areas should be cross-rolled ensuring an even and smooth finish throughout
  • Move down the floor and repeat the process until complete
  • If coating a large area, you may require multiple work-persons
  • The 2nd coat of Resin Technologies Penny Floor Paint should be applied no longer than 24 hours after the first coat of paint has cured
  • Please note the pot life for this product is 20 minutes, the paint will be unworkable due to chemical curing after this time, ensure you remove the paint from the tin during this window
  • The paint will be workable on your floor for 40 minutes
  • For more information please see the Data Sheets in the 'Data Sheets' tab, or please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]



Limitations


  • Do not apply on New or Wet Concrete (under 28 days old with residual moisture content of or higher 6%)
  • Do not apply below 7°C. Temperatures below 20°C will negatively impact curing/drying times
  • Do not expose to freezing conditions
  • Do not expose to chemicals, wash or allow water to rest on surface until 7 days after application
  • Do not expose to prolonged sunlight as this product is not UV Stable and will discolour
  • Concrete is required to possess a Damp Proof Membrane beneath it in order for Epoxy Coatings to be applied



Health & Safety


  • Wear appropriate PPE. I.E Gloves and protective safety goggles
  • If in contact with skin wash off immediately with plenty of soap and water. If discomfort occurs seek medical advice
  • This product should be applied strictly in accordance with manufacturer’s instructions
  • Always refer to the Material Safety Data Sheet before handling or mixing this product



Product Details
10410-984256

Data sheet

Manufacturer
Resin Technologies
For Use By
Consumer Use
Interior / Exterior Use
Interior Use
For Use On
Concrete
Wood
Application Method
Brush
Roller
Squeegee
Sheen
Gloss
Pack Size
2.5KG
5KG
Dry to Recoat (at 20°C)
8-12 Hours
Pot Life (at 20°C)
20 minutes
Coverage
0.6m² per kg
Min. Application Temperature
7°C
UN Number (Activator)
N/A
UN Number (Base)
UN3082
Dry for Light Traffic (at 20°C)
12-24 Hours
Dry for Full Traffic (at 20°C)
48 Hours
Colour(s)
Clear
Base Type
Solvent Free
Suitable For Use On
Concrete
Suitable For Use On
Wood
Suitable For Use On
Floors
Suitable For Use On
Wooden Worktops
Suitable For Use On
Table Tops
Finish
Gloss
Application Method
Brush
Application Method
Roller
Application Method
Squeegee
Manufacturer
Resin Technologies
Components
2K
Usages
Floor Coatings
Product Usage Type
Topcoat
Full Chemical Resistance
7 Days
Colour Family
Clear
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

Resin Technologies Penny Floor Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


COVERAGE CALCULATOR
Units
Total area²
Or enter length and width dimensions:
Length
Width

*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage. Two coats are recommended for this product

You might also like
Resin Technologies All Purpose Primer |  Solvent free

Resin Technologies All Purpose Primer

A versatile, durable Epoxy primer for use on concrete floors and for most other substrates. Offering excellent adhesion, it forms a strong foundation for which subsequent coats can be applied. It can be used either as a single-coat which seals and protects against moisture or, alternatively, when two coats are applied this system can even act...

Price £56.17 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Resin Technologies All In One Repair Mortar | Concrete Patch Repair

Resin Technologies All In One Repair Mortar

A three-part heavy duty patch material for repairing concrete. With a finish harder than concrete itself and extreme long-life durability this product is ideal for almost any concrete patch or repair job, on roads, in pot holes or even in industrial workspaces. All In One Repair Mortar offers a concrete-like smooth finish in a natural...

Price £54.36 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery