- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- 2,500+ Colours.
- High-performance water-based acrylic line marking paint.
- For asphalt, concrete, steel, and absorbent mineral substrates.
- Quick-drying semi-gloss finish.
- Interior/exterior use.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Bradite Roadline Paint RL52
Designed for long-lasting performance, this water-based line marking paint is ideal for use on various surfaces such as roads, car parks, and sports facilities. The formula provides excellent adhesion on concrete, steel, asphalt, and other mineral substrates when properly prepared. It also provides a durable, semi-gloss finish, and can be customised in a variety of colours, including standard options like white and yellow.
Application methods include brushing, rolling, and spraying, making it flexible for a range of projects. When applied correctly, it allows for light traffic within 16 hours, while full curing takes up to 7 days, depending on environmental conditions. Its water-based nature ensures low VOC emissions, adhering to European safety standards. This product can also be used with Bradite Low Slip Additive LS30 to enhance underfoot traction, providing a safer surface in wet or slippery conditions.
Application Instructions
For optimal results, the surface should be completely clean, dry, and free from dust or loose particles. When applying to bare, absorbent surfaces such as wood or unpainted concrete, it is recommended to apply a priming coat thinned with 5-10% water. Subsequent coats should be applied evenly to achieve the desired coverage.
- For best results, apply two full coats, allowing a minimum of 1 hour between coats.
- If used on porous surfaces, the first coat should be thinned to improve absorption.
- Ensure surfaces are above the local water table and have an intact DPM barrier for outdoor applications.
Drying times may vary depending on temperature and humidity, but the product can typically withstand light foot traffic after 16 hours and vehicle traffic after 48 hours.
Restrictions and Limitations
This paint is not recommended for use on surfaces exposed to standing water, or those not properly primed. Avoid applying in temperatures below -5°C or in high humidity conditions as this can prolong drying times and affect the quality of the finish. The product is non-flammable but should not be mixed with solvent-based paints or thinners. Always test for compatibility with existing coatings by applying a small patch before full application.
For further details on correct application and safety guidelines, please refer to the downloadable data sheet.
Health and Safety
Contains 1,2-Benzisothiazolin-3-one, which may cause allergic reactions in some individuals. Always wear protective gloves and avoid contact with skin and eyes. For more detailed safety information, consult the MSDS.
Product Details
10436-1036667
Data sheet
- Manufacturer
- Bradite
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior & Exterior
- Water / Solvent Based
- Water
- For Use On
- Asphalt, Steel, Concrete, Mineral Substrates, existing coatings including Polyurethane, Epoxy, and Chlorinated Rubber
- Application Method
- Brush, Roller, Airless Spray Conventional, Air Spray
- Sheen
- Semi-gloss
- Colour
- Standard / Ready Mixed, Fully Tintable
- Single, Two or Three Pack
- Single
- Product Certifications
- ISO 9001:2008, ISO 14001:2004 environmental management systems
- Pack Size
- 5L
- Fully Cured (at 20°C)
- 7 days
- Coverage
- 12m²/L/coat
- Recommended Thinner/Cleaner
- Water
- Min. Application Temperature
- Down to -5°C (but must be 3°C above dew point)
- Density
- 1.179 kg/L
- Solids by Volume
- 38.59%
- VOC
- 96 g/l
- Touch Dry
- 20 Mins
- Recommended Dry Film Thickness
- 78 microns/coat
- Recommended Wet Film Thickness
- 200 microns/coat
- UN Number
- N/A
- Colour(s)
- Fully Tintable
- Base Type
- Water-Based
- Suitable For Use On
- Concrete
- Suitable For Use On
- Steel
- Suitable For Use On
- Asphalt
- Suitable For Use On
- Previously Painted Surfaces
- Suitable For Use On
- Mineral Substrates
- Finish
- Semi-Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Product Usage Type
- Topcoat
- Colour Family
- Anthracite Grey
- Colour Family
- Cream
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- Magnolia
- Colour Family
- White
- Colour Family
- Neutral
- Product Type
- Acrylic
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Bradite Roadline Paint RL52 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage. Two coats are recoommended for this product.
You might also like
Bradite Acid Etch
Clear mineral acid solution designed for pre-treatment of bare concrete. Removes excess lime and prepares the surface for coatings. Professional use only.
Price
£33.72
(incl. VAT)
In Stock and Available for Delivery
Bradite Industrial Degreaser
Low-foaming, aqueous pink alkaline detergent designed for degreasing contaminated surfaces. Ideal for oily or soiled surfaces, especially for removing road dirt. Cleans thoroughly prior to painting.
Price
£67.94
(incl. VAT)
In Stock and Available for Delivery
Bradite Low Slip Additive (LS30)
Light grey additive used to enhance traction on floors. Ideal where a low-slip finish is needed. Hard-wearing, durable. Unlimited shelf life when stored correctly.
Price
£12.28
(incl. VAT)
In Stock and Available for Delivery