- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Coating designed to improve equivalent concrete cover to reinforcement. A 2mm layer provides 150mm equivalent concrete cover providing corrosion protection to steel reinforcement, thus extending the life of the concrete.
- Protective coating for concrete
- Elastic, covers fine cracks
- Waterproof, easy to apply, and touch dry is as little as 30 minutes
- Up to 1 hour workable life
- Please note that RonaBond Concrete Cover Elastic is for corrosion protection and will not improve the fire rating of concrete with insufficient cover
- Ronacrete RonaBond Concrete Cover Elastic - For professional and industrial use
RonaBond Concrete Cover Elastic is a coating designed to improve equivalent concrete cover to reinforcement. A 2mm layer provides 150mm equivalent concrete cover providing corrosion protection to steel reinforcement, thus extending the life of the concrete.
RonaBond Concrete Cover Elastic is supplied as a pre-packed material comprising liquid and powder. It is mixed to form a slurry which is applied by brush or roller at a thickness of approximately 1-2mm per coat on a vertical surface. The cured coating can be left as the finished surface or overcoated with a pigmented anti-carbonation coating such as RonaBond Crack Bridging Anti-Carbonation Coating WB or RonaBond Anti-Carbonation Coating WB.
Please note that RonaBond Concrete Cover Elastic is for corrosion protection and will not improve the fire rating of concrete with insufficient cover.
Quick Links - Click To Jump To Section:
Features & Benefits
- Protective coating for concrete
- Elastic, covers fine cracks
- 2mm application increases Equivalent Concrete Cover by 150mm
- Waterproof
- Easy to apply
Preparation
The substrate on which RonaBond Concrete Cover Elastic is being placed must be structurally sound and stable. Surfaces should ideally be prepared by water/grit blasting or similar means to remove previous coatings and any grease, oil, dirt and deleterious material. Damp the surface with clean water and remove excess.
Mixing
Mix RonaBond Concrete Cover Elastic with a slow speed (≤ 450 RPM) drill and MR 2 or 3 helical paddle.
Dry mix the powder to ensure the fine and coarse particles are thoroughly blended.
Add all of the supplied liquid to a mixing vessel and gradually add the powder component; continue mixing until the components are fully blended; reducing the gauging liquid content will reduce the effectiveness of the coating. RonaBond Concrete Cover Elastic is supplied pre-packed and no on site additions are required.
Application
As soon as the material is mixed, apply by brush or roller to the damp surface ensuring total coverage and a uniform surface appearance.
Apply the first coat and allow to dry for approximately 12-24 hours at 20℃.
Mix and apply successive coats at 90° to the previous coats and allow each to dry for approximately 12-24 hours at 20℃.
Data sheet
- Manufacturer
- Ronacrete
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Concrete
- Application Method
- Roller
Brush - Single, Two or Three Pack
- Two-Pack
- Pack Size
- 19KG
- Coverage
- 2mm coating over 1m² requires approx. 3.56kg
- Max. Application Temperature
- 30°C
- Touch Dry
- 30 minutes @ 20°C
- Dry to Recoat
- 12-24 hours
- Colour(s)
- Standard Colours
- Suitable For Use On
- Concrete
- Application Method
- Brush
- Application Method
- Roller
- Manufacturer
- Ronacrete
- Usages
- Anti-Corrosion
- Product Usage Type
- Reinforcement
- Product Range
- RonaBond
- Colour Family
- Grey
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Ronacrete RonaBond Concrete Cover Elastic is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Ronacrete RonaBond Anti-Carbonation Masonry Paint WB
Decorative, water-based, anti-carbonation coating used as a protective and decorative coating for new, maintenance and refurbishment work and can be applied to most traditional building surfaces including concrete, repair mortar, render and masonry after preparation. Ronacrete RonaBond Anti-Carbonation Coating WB has excellent CO2...
Ronacrete RonaBond Crack Bridging Anti-Carbonation Coating WB
High build, elastomeric waterproof anti-carbonation façade coating, with permanent flexibility and excellent self-cleaning properties. Has excellent CO2 resistance Dynamic crack accommodation up to 2mm Water based matt finish 1-3 coats using roller or airless spray application Available in white - colours available on request Case...