- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Jotun Jotamastic 87 Alu provides long lasting protection in environments with high corrosivity. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel and aged coating surfaces. It can be applied at sub zero surface temperatures.
Jotun Jotamastic 87 Alu Standard Paint
Jotun Jotamastic 87 Alu paint from the popular direct to metal paint brand, Jotun, is a two component polyamine cured epoxy mastic coating for steel. It is a surface tolerant, high solids, high build product that is aluminium pigmented for improved barrier effect. Specially designed for areas where optimum surface preparation is not possible or desired.
Jotun Jotamastic 87 Alu provides long lasting protection in environments with high corosivity. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel and aged coating surfaces. It can be applied at sub zero surface temperatures.
Uses
- General: Primarily designed for maintenance and repair.
- Marine: Outside hulls, exterior and interior areas, including water balast tanks.
- Protective: Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel.
Approvals and certificates
- Low flame spread class 1, BS 476, Part 7, 1971. Warrinton Fire reasearch, Naval Eng, Stand 713: Isue 3
- Grain, Newcastle Ocupational Health
- Part of a complete system that is certified to Network Rail Line Specification NR/L3/CIV/039 System M24 (Cert. No's. XM92/M24-141, XM92/M24-142)
Additional certificates and approvals may be available on request
Data sheet
- Manufacturer
- Jotun
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Carbon Steel
- Application Method
- Brush, Roller, Spray
- Sheen
- Semi-Gloss
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 4.4L, 17.4L
- Application
- Brush, Roller, Spray
- Touch Dry (at 20°C)
- 4 hours
- Coverage
- 2.9 to 5.8m²/l
- Touch Dry
- 4 hours
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN2735
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Suitable For Use On
- Carbon Steel
- Suitable For Use On
- Immersion
- Suitable For Use On
- Primed Surfaces
- Suitable For Use On
- Compatible Existing Coatings
- Finish
- Semi-Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- High Solids
- Usages
- High Build
- Usages
- Surface Tolerant
- Usages
- Atmospheric
- Usages
- Immersion
- Usages
- 1 Coat
- Usages
- High Corrosivity Environments
- Usages
- Direct to Metal
- Product Usage Type
- Primer & Topcoat
- Product Range
- Jotamastic
- Colour Family
- Aluminium
- Product Type
- Epoxy Mastic
- Environment
- Immersion
- Environment
- Atmospheric
- Environment
- High Corrosivity Environments
- Touch Dry/Dust Free (@ 20-25°C)
- 4 hours
- Product Attributes
- 1 coat
- Product Attributes
- High Build
- Product Attributes
- High Solids
- Product Attributes
- Surface Tolerant
Questions
Question about the product
Chinedu Egbunike on 2019-03-30 13:49:14 | Question:
Is this product Jotunmastic 87 heat resistant, if yes to what degree? | ||||||||||||
Answer from Rawlins’ Technical Team:
The temperature resistant properties of Jotun Jotamastic 87 Alu are as follows;
Notes:
| |||||||||||||
Mike Hazeltine on 2017-10-18 14:11:33 | Question:
Its not so much a question on your product, but a question on preparation.
I have a steel keel on my yacht (type unknown), but its become very rusty (type D) and I am looking at using your paint. If I was to use power tools, would I need to remove all the rust marks and secondly where the steel is pitted should I use your paint first and then fill (Please advise type of filler) or should I perhaps use a 2 pack epoxy primer as a filler. |
Answer from Rawlins’ Technical Team:
The way forward is to get the best possible surface preparation, removing most of the corrosion. More importantly we need a roughness so avoid polishing the steel if sanding/discing. Vital is to then to detergent wash (fairy liquid soapy solution) and rinse thoroughly with fresh water, high pressure if possible to remove contamination. We would then suggest (if application by brush) Jotamastic Smart Pack, minimum 3 coats, 4 is better. Apply 1 st coat direct to steel, allow to dry and then fill with an epoxy filler, allow to dry, sand and then continue with further coats. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Jotun Jotamastic 87 Alu is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT