Follow us on:

Ronacrete RonaFloor PU Coating | UV Resistant Sealer for Walls & Floors
Ronacrete RonaFloor PU Coating | UV Resistant Sealer for Walls & Floors

Ronacrete RonaFloor PU Coating

RON10495
RON10495

Single component solvented UV resistant polyurethane floor and wall sealer.

  • Ronacrete RonaFloor PU Coating: For professional and industrial use
  • Excellent weathering resistance
  • Increased anti-abrasion properties
  • Dust elimination due to in-surface seal
  • Improve frost resistance of concrete
  • Chemical resistant against a wide range of chemicals and solvents
  • Simple to use, very durable, moisture curing, supplied ready to use

Colour
Size
Finish
£114.37(incl. VAT)
£95.31(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

RonaFloor PU Coating is a single component solvent based moisture cured polyurethane sealer/ coating which offers superior abrasion, chemical and weather resistance. When used as a coating it forms a hard film which is UV resistant and therefore non-yellowing.



Quick Links - Click To Jump To Section:




Features & Benefits


  • Excellent weathering resistance
  • Superior abrasion resistance
  • In-surface sealing eliminates dusting
  • Improves frost resistance of concrete
  • Resists a wide range of chemicals
  • Simple to use
  • Supplied ready to use
  • Moisture curing



Limitations


  • Only apply on to dry surfaces
  • Do not use RonaFloor PU Coating near naked flame
  • Protect from water spills, rain and adverse weather until fully cured
  • Adhesion is reduced on non-porous surfaces such as glazed tiles



Surface Preparation


Thoroughly clean all surfaces to remove loose material, dirt, dust, grime etc.

Ensure the surface is dry before application. Any moss, algae or fungal growth should be treated with Fongimousse Plus followed by hosing and stiff brushing.



Method of Application


  1. RonaFloor PU Coating is supplied ready to use; no dilution is required
  2. Apply RonaFloor PU Coating by medium nap lambswool roller and ensure full coverage
  3. Apply evenly; uneven application may result in visible roller marks and shading
  4. A single heavy coat applied at a rate of 6m² per litre is typically sufficient when an in-surface seal is required. Two coats are normally sufficient when a surface film is required to concrete of normal porosity, porous concrete may require at least three coats. Porous screeds and renders may require four or more coats. When applying coloured RonaFloor PU Coating to concrete, three coats may be required to achieve full opacity
  5. Overcoat previous coats after 4-24 hours @ 20°C & 60% RH
  6. Avoid pooling, ponding and over-treating to avoid solvent entrapment
  7. When attempting to consolidate porous and friable surfaces such as screeds or renders, apply successive coats to satisfy the porosity of the surface and until no more is absorbed. The degree to which such surfaces can be improved is variable and dependent on factors including the condition of the surface, the size and nature of pores, the original strength and stability of the surface. Application of this type is not always successful



Product Details
10495-988383

Data sheet

Manufacturer
Ronacrete
For Use By
Professional Use
Interior / Exterior Use
Interior & Exterior
For Use On
Concrete Floors
Concrete Walls
Glazed Tiles
Application Method
Roller
Pack Size
5L
22L
Base Type
Solvent
Dry to Recoat (at 20°C)
2-24 hours
Coverage
6-10m² per litre per coat
Max. Application Temperature
25°C
Min. Application Temperature
5°C
Touch Dry
2 hours
UN Number
UN1866
Fully Cured
7 days
Flashpoint
26°C
Colour(s)
Clear
Base Type
Solvent-Based
Suitable For Use On
Concrete Floors
Suitable For Use On
Concrete Walls
Suitable For Use On
Glazed Tiles
Finish
Satin
Application Method
Roller
Manufacturer
Ronacrete
Usages
Weatherproofing
Product Usage Type
Sealer
Product Range
RonaFloor
Foot Traffic
4 hours @ 200°C & 60% RH
Forklift Traffic
24 hours @ 200°C & 60% RH
Cleaning
Water
Colour Family
Clear
Intercoat Period
4-24 hours
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

Ronacrete RonaFloor PU Coating is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT