- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Solvent-free epoxy resin primer for adhesion to dry concrete and polymer modified screeds.
- Use before application of RonaFloor epoxy floorings, for excellent adhesion and minimal pin holing from porous substrates
- Good adhesion to prepared concrete and polymer screeds
- >2.5N/mm² bond strength to concrete
- Apply by medium nap lambswool roller
- Solvent free; low odour
- 30 minute pot life - 24 hour intercoat period
- Apply flooring after 24 hours
- 0.0ml/m²/sec ISAT
- Ronacrete RonaFloor Epoxy Primer - For professional and industrial use
RonaFloor Epoxy Primer is a two pack solvent-free primer for application to dry concrete and polymer screeded substrates. Typically used to prime concrete before application of RonaFloor epoxy floorings, for excellent adhesion and minimal pin holing from porous substrates.
Quick Links - Click To Jump To Section:
Substrate Preparation
To achieve optimal adhesion it is essential that RonaFloor Epoxy Primer is applied to structurally sound, clean and dry substrates.
Surfaces must be prepared after making good any defects in the floor, ensuring that friable materials are removed and replaced (for fast cure repairs refer to RonaFloor Repair 1 Hour data sheets).
Concrete must be prepared by captive shot blasting or similar method to produce lightly textured, laitance free surfaces. Steel must be shot/ grit blasted to SA 2.5.
Substrates must be cleaned to remove grease, oil and dirt. Substrates must be allowed to dry after washing. Substrates must be vacuum cleaned, to remove shot and other loose materials.
Application Conditions
The workability and application characteristics of RonaFloor Epoxy Primer are adversely affected by low temperature; viscosity and curing time will increase. Therefore the material should ideally be stored, mixed and applied at 15°C to 20°C. At lower application temperatures the material should be stored at or warmed to 15°C to 20°C prior to use.
Application characteristics are severely affected below 10°C, minimum application temperature is 5°C.
Mixing
Add the full contents of component B to the full contents of component A and mix with a slow speed drill and spiral mixing paddle (MR2 or MR3 type) for approximately 3-4 minutes.
Transfer to a shallow paint tray immediately after mixing, or pour onto the floor, to control exothermic reaction and extend working time.
Material must never be taken directly from the mixing vessel, to avoid the risk of unmixed material being used.
Application
- Apply a single coat of RonaFloor Epoxy Primer by medium nap lambswool or mohair roller to the dry prepared substrate at 4-6m²/ kg/ coat
- Further coats may be required on porous substrates to prevent blow holes
- Allow to cure for approximately 24 hours at 20°C
Cleaning
Clean tools immediately with xylene based solvent or RonaDeck Low VOC Cleaner.
Data sheet
- Manufacturer
- Ronacrete
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior Use
- For Use On
- Concrete Floor Screeds
- Application Method
- Roller
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 2.25kg
4.5kg - Mixing Ratio
- 1:1
- Pot Life (at 20°C)
- 30 minutes
- Coverage
- 4-6m²/ kg/ coat
- Max. Application Temperature
- 20°C
- Min. Application Temperature
- 5°C
- Colour(s)
- Clear
- Suitable For Use On
- Concrete Floor Screeds
- Application Method
- Roller
- Manufacturer
- Ronacrete
- Product Usage Type
- Primer
- Product Range
- RonaFloor
- Cleaning
- RonaDeck Low VOC Cleaner
- Bond Strength
- 2.5N/mm²
- Colour Family
- Clear
- Dry for Overcoating (20°C)
- Apply flooring after 24 hours
- Intercoat Period
- 24 hours at 20°C
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Ronacrete RonaFloor Epoxy Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT