- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Zenova IP embeds the most modern insulating technology in a thermos-like ultra-thin layer. Intended for use in new thermal improvement projects, for the renovation and maintenance of existing wall assemblies to improve their thermal performance. Suitable internally and externally for walls, roofs (metallic, ceramic etc. ), pipes, ducting, and offers protection against humidity, very high and very low temperatures.
- Excellent adhesion to any surface: metal, concrete, wood, glass etc
- Eliminates thermal bridging and water capillarity
- Helps limit building efficiency losses in common areas
- May qualify homes and buildings for government grants
- Lowers heating costs in winter and cooling costs in summer
- Extends the life of any asset with excellent anti-corrosion and anti-mould properties
- Saves energy by increasing the thermal insulation level in structures it is applied to
- High solar reflectance properties, since solar heat can increase the temperature within a structure by 75% to 90%
- Independently tested and validated to deflect, absorb and dissipate up to 75% of this heat, thereby reducing the inside temperature by up to 45%
- 10 Years warranty (when used with Zenova Primer)
Zenova IP is a monocomponent thermal insulating paint. It is an ecological product based on ceramic microspheres which, after application, presents outstanding properties of thermal insulation internally and externally, thermal reflection of sunrays and infrared radiation, anti-condensation and anti-mold characteristics.
The longer Zenova IP is in use, the larger the return on the investment into its application.
Governments around the globe are imposing a wide range of sweeping emission-reduction measures, paving the way for innovative technologies such as the application of Zenova IP insulating paint. Communities, businesses, and governments can more easily comply with new emission standards while also reducing energy consumption and associated costs by applying Zenova IP both inside and outside of buildings.
With global warming and the need, not the desire, to protect our only planet at the forefront of virtually every government’s agenda, the time has never been better to apply Zenova IP as an additional measure towards achieving net zero emissions.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Flexible Uses For Controlling Temperature
- Preparation
- Prime
- Application
- Testing
- Work Safety
- Package, Storing, Transport
- Shelf Life
Features & Benefits
- Greatly reduced heating and cooling costs
- Extends substrate life by preventing condensation and corrosion
- Prevents mold growth
- Enhances appearance
- Protects from elements (salt, rain, wind, temperature fluctuations, chemical vapors)
- The thermal reflection of solar rays, including infrared radiation
- Proprietary thermal insulation retains internal heat by greatly reducing heat transfer
- Anti-condensation characteristics
- Needs only a thin layer; 0.5-3mm
- Excellent adhesion to any surface: metal, concrete, wood, glass etc
- Very easy application: with roller, brush or airless gun
- Eco-friendly, non-toxic, non-flammable, odorless
- Quick drying time
Flexible Uses For Controlling Temperature
Saving Through Innovation
While there are obvious uses when applied internally and externally to buildings, the benefits achieved via the simple thin-coat application of Zenova IP are not limited to the construction sector.
The application of Zenova IP as an insulating barrier applied to the inside and outside of refrigerated compartments of all manner of commercial vessels will effectively help the transport industry move towards achieving new, lofty, efficiency goals - all while reducing the costs associated with refrigerated shipping.
Similarly, when applied to the rooftops of manufacturing and storage facilities, Zenova IP can greatly increase the efficiency of these spaces, offering an ever-increasing ROI as this one-time solution remains effective for years to come.
In addition to the energy savings realized from the application of Zenova IP, the lifespan of assets such as pipelines and storage tanks is extended considerably with built-in corrosion protection features.
- Refrigerated truck interiors
- Factory buildings
- Shipping containers
- Piping
Preparation
All surfaces should be properly prepared and cleaned.
Remove any loose paint or rust. Wash off dirt and grease with detergent, rinse and allow to dry.
Remove mildew stains with a mildew stain removing product.
Scuff sand glossy surfaces and repair imperfections. Remove all dust with a damp cloth and allow to dry.
Allow new plaster and masonry to cure for 30 days before painting.
Prime
Apply a layer of Zenova Primer to prepared surface with a paint brush, lime brush, roller or by pulverization.
Volume required for Zenova Primer layer is 50 -100 ml/m².
Application
Once prep is complete and Zenova Primer is completely dry you are ready to apply Zenova IP. Stir paint thoroughly prior to use.
Zenova IP can be applied with a paint brush, roller, lime brush or by air-less spray gun (details of approved models are in the Equipment Guidelines, available from the Data Sheets tab). Allow each layer to dry completely before applying additional layers.
Recommended application temperature is 10-40°C.
Theoretical product consumption: 830-1300 ml/m² at a total wet film thickness of 0.8- 1.3mm to achieve a dry film thickness of 0.5-0.8mm. Thermal performance and actual product consumption may vary depending on the substrate, equipment used, application method, and building type.
For most cases, the recommended thickness is 1.5mm. As a general rule, the larger the temperature difference between the 2 areas that are separated by Zenova IP, the thicker Zenova IP should be applied.
Testing
Zenova IP has been independently tested to the following standards by multiple accredited testing agencies. (Reports available for download from the data sheets tab further above.)
- BS EN 13823 (SBI): 2020
- ASTM C1371, ASTM C1549, ASTM E1980
- BS EN 11925-2
Work Safety
Special measures of protection are not necessary, the product being non-flammable and non-dangerous.
Package, Storing, Transport
Zenova IP is packed in sealed PE buckets. Store away from direct sunlight and preferably away from negative temperatures.
Storage temperature: 5-35°C.
Shelf Life
Shelf-life is 36 months after production date.
Data sheet
- Manufacturer
- Zenova
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Metal roofs
Concrete roofs
Glass roofs
Metal walls
Concrete walls
Glass walls
Ceramic
Metal pipes
Concrete pipes
Metal ducting - Application Method
- Brush
Roller
Spray - Sheen
- Matt
- Single, Two or Three Pack
- Single
- Pack Size
- 20L
- Minimum Applied Thickness
- 0.5mm
- Maximum Applied Thickness
- 3mm
- Coverage
- 15-24m² per 20L tin
- Max. Application Temperature
- 130°C
- Min. Application Temperature
- 10°C
- Density
- 0,75 ± 0,05
- Solids by Volume
- 55±5%
- Shelf Life (from date of manufacture)
- 36 months
- Consumption
- 830-1300 ml/m² at a total wet film thickness of 0.8- 1.3mm to achieve a dry film thickness of 0.5-0.8mm
- Viscosity
- 10 000 ± 5 000
- Colour(s)
- White
- Suitable For Use On
- Concrete Walls
- Suitable For Use On
- Concrete Roofs
- Suitable For Use On
- Metal Pipes
- Suitable For Use On
- Concrete Pipes
- Suitable For Use On
- Glass Roofs
- Suitable For Use On
- Metal Walls
- Suitable For Use On
- Glass Walls
- Suitable For Use On
- Metal Ducting
- Suitable For Use On
- Metal
- Suitable For Use On
- Metal Roofs
- Suitable For Use On
- Ceramics
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Manufacturer
- Zenova
- Usages
- Temperature Resistance
- Usages
- Mould Resistance
- Product Usage Type
- Midcoat
- Abrasion Resistance
- High
- Reaction to Fire
- B - s1, d0 (BS EN 13501-1)
- Colour Family
- White
- Thermal Emittance
- 0.880 (ASTM C1371)
- Solar Reflectance
- 0.834 (ASTM C1549)
- Solar Reflectance Index
- 104
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Zenova IP Thermal Insulating Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT