Quick Links - Click To Jump To Section:

   
• Uses
• Application
• Preparation of the Surface
• Package, Storing, Transport

Uses

Use Zenova PS as a protective topcoat over:

Zenova IP Thermal Insulating Paint

Embeds the most modern insulating technology in a thermos-like ultra-thin layer. Intended for use in new thermal improvement projects, for the renovation and maintenance of existing wall assemblies to improve their thermal performance. Suitable internally and externally for walls, roofs (metallic, ceramic etc. ), pipes, ducting, and offers protection against humidity, very high and very low temperatures.

Zenova FP Intumescent Paint

The number one intumescent paint on the market, Zenova FP is a heat-resistant, water-based paint that prevents the ignition and spread of fire. As a result of being exposed to heat, the intumescent paint swells and creates a light char foam, increasing in volume and decreasing in density. The heat transfer from the flames to the substrate is thereby greatly diminished. Treated materials become isolated from elements that maintain fire combustion since the paint turns into an insulating protective membrane.

One primer coat and only 1.3mm of Zenova FP, to comply with BS 476 part 22, will protect a variety of substrates and products such as wood, metal, polyurethane foam, and GRP phenolic foam filled fire doors from fire damage should a fire occur within a building. Zenova FP will provide suitable passive fire protection to any surface it is applied to, minimising financial loss and offering peace of mind.

Application

Application of Zenova PS should be done by personnel trained for this type of work, with respect to the corresponding technical recommendations.

Application should be done only in good atmospheric conditions (ambient temperature of minimum 10°C, acceptable ventilation and relative humidity of maximum 80%).

• Airless / Air Assisted Airless Recommended Tip Size 009-011
• Conventional Spray : Gravity Gun 1.3 - 1.8 @ 2-3 Bar

Preparation of the Surface

1. The surfaces on which the Zenova PS will be applied on must be clean, dry and dust-free
2. Zenova PS is best applied on the prepared surfaces by spraying
3. Application of Zenova PS should be done after complete drying of the IP or FP

Wash tools with water after usage.

Package, Storing, Transport

Zenova PS is packed in sealed tins.

Store away from direct sunlight and preferably away from negative temperatures.

Storage temperature: 5-35°C.